Hyundai Elantra 2023 Instrument Cluster 

Welcome to the 2023 Hyundai Elantra Instrument Cluster Guidelines, your thorough guide to comprehending and maximizing the potential of your car’s digital brain. This manual is your reliable travel companion as you set out on your adventure in this cutting-edge sedan, offering helpful insights into how the instrument cluster works and the amount of data it shows. This manual makes sure you can handle the road ahead with clarity and confidence, covering everything from keeping an eye on your car’s speed and fuel levels to deciphering warning lights and accessing customization options. The 2023 Elantra Instrument Cluster Guidelines give you the ability to make every drive not only effective but also safe and knowledgeable because to Hyundai’s dedication to innovation and user-friendly technology.

2023 Hyundai Elantra Specs, Price, Features, Milage (Brochure)

Instrument Cluster Instrument Cluster Control

1.  Tachometer
2. Speedometer
3. Engine coolant temperature gauge
4. Fuel gauge
5. Warning and indicator lights
6. LCD display (including trip computer)

Adjusting instrument cluster illumination.

When the vehicle’s parking lamps or headlights are on, press the illumination control button to adjust the brightness of the instrument panel illumination.
When pressing the illumination control button, the interior switch illumination intensity is also adjustable.

• The brightness of the instrument panel illumination is displayed.
• If the brightness reaches the maximum or minimum level, a chime will sound.

WARNING
Never adjust the instrument cluster while driving. Doing so could lead to driver distraction which may cause an accident and lead to vehicle damage, serious injury, or death.

Gauges and Meters Speedometer

The speedometer indicates the speed of the vehicle and is calibrated in miles per hour (MPH) and/or kilometers per hour (km/h).

Tachometer

The tachometer indicates the approximate number of engine revolutions per minute (RPM).
Use the tachometer to select the correct shift points and to prevent lugging and/or over-revving the engine.

NOTICE
Do not operate the engine within the tachometer’s RED ZONE. This may cause severe engine damage.

Engine coolant temperature gauge

This gauge indicates the temperature of the engine coolant when the ignition switch is in the ON position.

NOTICE
If the gauge pointer moves beyond the normal range area toward the “H” position, it indicates overheating that may damage the engine.
Do not continue driving with an overheated engine. If your engine overheats, refer to “If the Engine Overheats” in chapter 7.

WARNING
Never remove the radiator cap or reservoir cap when the engine is hot. The engine coolant is under pressure and could severely burn. Wait until the engine is cool before adding coolant to the reservoir.

Fuel gauge

This gauge indicates the approximate amount of fuel remaining in the fuel tank.

Information

• The fuel tank capacity is given in chapter 2.
• The fuel gauge is supplemented by a low fuel warning light, which will illuminate when the fuel tank is nearly empty.
• On inclines or curves, the fuel gauge pointer may fluctuate or the low fuel warning light may come on earlier than usual due to the movement of fuel in the tank.

WARNING
Running out of fuel can expose vehicle occupants to danger.
You must stop and obtain additional fuel as soon as possible after the warning light comes on or when the gauge indicator comes close to the “E (Empty)” level.

NOTICE
Avoid driving with an extremely low fuel level. Running out of fuel could cause the engine to misfire and damage the catalytic converter.

Outside temperature gauge

This gauge indicates the current outside air temperature by 1°F (1°C).

• • Temperature range: -40°F ~ 140°F (40°C ~ 60°C)

Note that the temperature indicated on the LCD display may not change as quickly as the outside temperature (there may be a slight delay before the temperature changes.)
You can change the temperature unit from °F to °C or °C to °F in the User Settings mode in the cluster:

• Go to user setting mode other Temperature Unit.

Temperature Unit.
For vehicles equipped with Automatic Climate Control, you can also:

• Press and hold the AUTO and OFF buttons on the climate control unit for 3 seconds

Both the temperature unit on the cluster LCD display and the climate control screen will change.

Odometer

The odometer indicates the total distance that the vehicle has been driven and should be used to determine when periodic maintenance should be performed.

Range

The range is the estimated distance the vehicle can be driven with the remaining fuel.

•  If the estimated distance is below 1 mi. (1 km), the trip computer will display “—-” as a range.

Information

•  If the vehicle is not on level ground or the battery power has been interrupted, the range function may not operate correctly.
• The range may differ from the actual driving distance as it is only an estimate of the available driving range for the vehicle and driving conditions.
•  The trip computer may not register additional fuel if less than 1.6 gallons (6 liters) of fuel are added to the vehicle.
• The range may vary significantly based on driving conditions, driving habits, and the condition of the vehicle.

Transmission Shift Indicator

Manual transmission shift indicator

This indicator informs which gear is recommended while driving, to save fuel.

• Shifting up:􀀁2, 􀀁3, 􀀁4, 􀀁5, 􀀁6
• Shifting down: 􀀂1, 􀀂2, 􀀂3, 􀀂4, 􀀂5
  For example

13Indicates that shifting up to the 3rd gear is recommended (currently the shift lever is in the 2nd or 1st gear).
13Indicates that shifting down to the 3rd gear is recommended (currently the shift lever is in the 4th, 5th, or 6th gear).
When the system is not working properly, the indicator is not displayed.

Intelligent variable transmission shift indicator

This indicator displays which shift button position is selected.

Warning and Indicator Lights

Information
Make sure that all warning lights are OFF after starting the engine. If any light is still ON, this indicates a situation that needs attention.

Air Bag Warning Light
This warning light illuminates:

• When you place the ignition switch to The air bag warning light illuminates for about 6 seconds and then turns off when all checks have been performed
•  The air bag warning light will remain illuminated if there is a malfunction with the Safety Restraint System (SRS) air bag operation.
  In this case, have the vehicle inspected by an authorized HYUNDAI dealer.

Seat Belt Warning Light

This warning light informs the driver that the seat belt is not fastened.
For more information, refer to “Seat Belts” in chapter 3.

Parking Brake & Brake Fluid Warning Light

This warning light illuminates:

•  When you place the ignition switch to the ON position.
  • The parking brake light illuminates for about 3 seconds and will then turn off once the parking brake is released.
• Whenever the parking brake is
  applied.
• Whenever the brake fluid level in the reservoir is low.
  • If the warning light illuminates with the parking brake released, it indicates that the brake fluid level in the reservoir is low.

If the brake fluid level in the reservoir is low:

1.  Drive carefully to the nearest safe location and stop your vehicle.
2. With the engine stopped, check the brake fluid level immediately and add fluid as required (For more information, refer to “Brake Fluid” in chapter 9). After adding brake fluid, check all brake components for fluid leaks. If a brake fluid leak is found, or if the warning light remains on, or if the brakes do not operate properly, do not drive the vehicle. Have the vehicle inspected by an authorized HYUNDAI dealer.

Dual-diagonal braking system
Your vehicle is equipped with dual-diagonal braking systems. This means you still have braking on two wheels even if one of the dual systems should fail.
With only one of the dual systems working, more than normal pedal travel and greater pedal pressure is required to stop the vehicle.
If the brakes fail while you are driving, shift to a lower gear for additional engine braking and stop the vehicle as soon as it is safe to do so.

WARNING
Parking Brake & Brake Fluid Warning Light
Driving the vehicle with a warning light ON is dangerous. If the Parking Brake & Brake Fluid Warning Light illuminates with the parking brake released, it indicates that the brake fluid level is low.
In this case, have the vehicle inspected by an authorized HYUNDAI dealer.

Anti-lock Brake System (ABS) Warning Light
This warning light illuminates:

• When you place the ignition switch to the ON position.
  • The ABS warning light illuminates for about 3 seconds and then turns off.
• Whenever there is a malfunction with the ABS.
  Note that the hydraulic braking system will still be operational even if there is a malfunction with the ABS.

Electronic Brake Force Distribution (EBD) System Warning Light

These two warning lights illuminate at the same time while driving:
When the ABS and regular brake system may not work normally.
In this case, have the vehicle inspected by an authorized HYUNDAI dealer.

WARNING

Electronic Brake Force Distribution (EBD) System Warning Light

When both ABS and Parking Brake & Brake Fluid Warning Lights are on, the brake system will not work normally and you may experience an unexpected and dangerous situation during sudden braking.
In this case, avoid high speed driving and abrupt braking.
Have the vehicle inspected by an authorized HYUNDAI dealer as soon as possible.

Information 
Electronic Brake Force Distribution (EBD) System Warning Light
When the ABS Warning Light is on or both ABS and Parking Brake & Brake Fluid Warning Lights are on, the speedometer, odometer, or tripmeter may not work. Also, the EPS Warning Light may illuminate and the steering effort may increase or decrease.
In this case, have the vehicle inspected by an authorized HYUNDAI dealer as soon as possible.

Electronic Parking Brake (EPB) Warning Light (if equipped)

This warning light illuminates:
When you place the Engine Start/Stop button to the ON position.

• • The EPB warning light illuminates for approximately 3 seconds and then turns off.
• Whenever there is a malfunction with the EPB.
  If this occurs, have the vehicle inspected by an authorized HYUNDAI dealer.

Information
The Electronic Parking Brake (EPB) Warning Light may illuminate when the Electronic Stability control (ESC) Indicator Light comes on to indicates that the ESC is not working properly (This does not indicate malfunction of the EPB).

AUTO HOLD Indicator Light (if equipped)

This indicator light illuminates:

•  [White] When you activate the auto hold system by pressing the AUTO HOLD button.
•  [Green] When you stop the vehicle completely by depressing the brake pedal with the auto hold system activated.
•  [Yellow] When there is a malfunction with the auto hold system.
  In this case, have the vehicle inspected by an authorized HYUNDAI dealer.

For more information, refer to “Auto Hold” in chapter 6.

Electric Power Steering (EPS) Warning Light

This warning light illuminates:

•  When you place the ignition switch to the ON position.
  • The Electric Power Steering Warning light illuminates for about 3 seconds and then goes off.
• Whenever there is a malfunction with the EPS.

If this occurs, have the vehicle inspected by an authorized HYUNDAI dealer.

Malfunction Indicator Lamp (MIL)

This warning light illuminates:

•  When you place the ignition switch to the ON position.
  • The malfunction indicator light illuminates for about 3 seconds and then goes off.
• Whenever there is a malfunction with either the emission control system or the engine or the vehicle powertrain.
  If this occurs, have the vehicle inspected by an authorized HYUNDAI dealer.

NOTICE

•  Driving with the Malfunction Indicator Lamp (MIL) on may cause damage to the emission control system which could affect drivability and/or fuel economy.
• If the enhanced engine protection system becomes activated due to lack of engine oil, engine power will be limited. If such condition continues repeatedly, the Malfunction Indicator Lamp will illuminate.

NOTICE

1. If the Malfunction Indicator Lamp
   (MIL) illuminates, potential cat1. Drive carefully to the nearest safe location and stop your vehicle.
2. Turn the engine off and check
   the engine oil level (For more information, refer to “Engine Oil” in chapter 9). If the level is low, add oil as required.
   If the warning light remains on after adding oil or if oil is not available, have the vehicle inspected by an authorized HYUNDAI dealer as soon as possible. Continued driving with the warning light on may cause engine failure.alytic converter damage is possible which could result in loss of engine power.
   In this case, have the vehicle inspected by an authorized HYUNDAI dealer as soon as possible.
   If the oil pressure lowers due to insufficient engine oil, etc., the engine oil pressure warning light turns on and an enhanced engine protection system that limits the engine’s power is activated. After that, engine warning light turns on if driving repeatedly and continuously.

Charging System Warning Light

When this warning light illuminates while the engine is running, the battery is not being charged. Immediately turn OFF all electrical accessories. Try not to use electrically operated controls, such as the power windows. Keep the engine running.
Have the vehicle inspected by an authorized HYUNDAI dealer as soon as possible.

Engine Oil Pressure Warning Light

This warning light illuminates: When the engine oil pressure is low.
If the engine oil pressure is low:

1. Drive carefully to the nearest safe location and stop your vehicle.
2.  Turn the engine off and check the engine oil level (For more information, refer to “Engine Oil” in chapter 9). If the level is low, add oil as required.

If the warning light remains on after adding oil or if oil is not available, have the vehicle inspected by an authorized HYUNDAI dealer as soon as possible. Continued driving with the warning light on may cause engine failure.

Information
When engine oil pressure decreases due to insufficient engine oil, etc., the Engine Oil Pressure warning light will illuminate. In addition, the enhanced engine protection system which limits engine power will be activated. If the engine oil pressure is restored, the Engine Oil Pressure warning light and the enhanced engine protection system will turn off.

WARNING
When oil pressure is restored to an optimal level, the oil pressure warning light and the protection system that limits engine power will turn off. Even if the oil pressure returns to normal, check the engine once again in a safe place.

NOTICE
If the engine is not turned OFF immediately after the Engine Oil Pressure Warning Light is illuminated, severe damage could occur.

Low Fuel Level Warning Light

This warning light illuminates:
When the fuel tank is nearly empty. Add fuel as soon as possible.

NOTICE
Driving with the Low Fuel Level warning light on or with the fuel level below “E” can cause the engine to misfire and damage the catalytic converter.

Master Warning Light

This indicator light illuminates:
When there is a malfunction in operation in any of the following systems:

• Forward Collision-Avoidance Assist system malfunction (if equipped)
•  Forward Collision-Avoidance Assist radar blocked (if equipped)
• Blind-Spot Collision Warning system malfunction (if equipped)
• Blind-Spot Collision Warning radar blocked (if equipped)
• High Beam Assist malfunction (if equipped)
• Lamp malfunction (if equipped)
• Smart Cruise Control malfunction (if equipped)
• Tire Pressure Monitoring System(TPMS) malfunction (if equipped)

To identify the details of the warning, look at the LCD display.

Low Tire Pressure Warning Light (if equipped)

This warning light illuminates:

• When you place the ignition in the ON position.
  • It illuminates for approximately 3 seconds and then goes off.
•  When one or more of your tires are significantly underinflated. (The location of the underinflated tires is displayed on the LCD display.)

For more information, refer to “Tire Pressure Monitoring System (TPMS)” in chapter 8.
This warning light remains ON after blinking for approximately 60 seconds, or repeatedly blinks ON and OFF in 3 second intervals:
When there is a malfunction with the TPMS.
In this case, have the vehicle inspected by an authorized HYUNDAI dealer as soon as possible.
For more information, refer to “Tire Pressure Monitoring System (TPMS)” in chapter 8.

WARNING
Safe Stopping

• The TPMS cannot alert you to severe and sudden tire damage caused by external factors.
• If you notice any vehicle instability, immediately take your foot off the accelerator pedal, apply the brakes gradually with light force, and slowly move to a safe position off the road.

Electronic Stability Control (ESC) Indicator Light

This indicator light illuminates:

• When you place the ignition switch to the ON position.
  • The Electronic Stability Control indicator light illuminates for about 3 seconds and then goes off.
  • Whenever there is a malfunction with the ESC system.

If this occurs, have the vehicle inspected by an authorized HYUNDAI dealer.
This indicator light blinks:
While the ESC is operating.
For more information, refer to “Electronic Stability Control (ESC)” in chapter 6.

Electronic Stability Control (ESC) OFF Indicator Light
This indicator light illuminates:

• When you place the ignition switch in the ON position.
  • It illuminates for approximately 3 seconds and then goes off.
  • When you deactivate the ESC system by pressing the ESC OFF button.

For more information, refer to “Electronic Stability Control (ESC)” in chapter 6.

AUTO STOP indicator light (if equipped)

This indicator light illuminates:
When the engine enters the Idle Stop mode of ISG (Idle Stop and Go) system.
When the engine automatically starts, the AUTO STOP indicator on the cluster Illuminates to white.
For more details, refer to “ISG (Idle Stop and Go) system” section in chapter 6.

Information
When the engine automatically starts by the ISG system, some warning lights (ABS, ESC, ESC OFF, EPS or Parking brake warning light) may turn on for a few seconds. This happens because of low battery voltage. It does not mean the system has malfunctioned.

2023 Hyundai Elantra Specs, Price, Features, Milage (Brochure)

Immobilizer Indicator Light

This indicator light illuminates:

• When the vehicle detects the immobilizer in the key with the ignition switch in the ON position.
  • At this time, you can start the engine.
  • The indicator light goes off after starting the engine.

This indicator light blinks:

• When there is a malfunction with the immobilizer system.
  If this occurs, have the vehicle inspected by an authorized HYUNDAI dealer.

Immobilizer Indicator Light (with smart key) (if equipped)

This indicator light illuminates for up to 30 seconds:
When the vehicle detects the smart key in the vehicle with the Engine Start/Stop button in the ACC or ON position.

• • Once the smart key is detected, you can start the engine.
  • The indicator light goes off after starting the engine.

This indicator light blinks for a few seconds:
When the smart key is not in the vehicle.

• If the smart key is not detected, you cannot start the engine.

This indicator light illuminates for 2 seconds and goes off:
If the smart key is in the vehicle and the Engine Start/Stop button is ON, but the vehicle cannot detect the smart key.
In this case, have the vehicle inspected by an authorized HYUNDAI dealer.

This indicator light blinks:
When there is a malfunction with the immobilizer system.
In this case, have the vehicle inspected by an authorized HYUNDAI dealer.

Turn Signal Indicator Light

This indicator light blinks:
When you operate the turn signal indicator stalk.
If any of the following occur, there may be a malfunction with the turn signal system.

• The turn signal indicator light illuminates but does not blink
• The turn signal indicator light blinks rapidly
• The turn signal indicator light does not illuminate at all

If any of these conditions occur, have your vehicle inspected by an authorized HYUNDAI dealer.
For more details, refer to “High Beam Assist (HBA)” in chapter 5.

Exterior Light Warning Light (if equipped)

This warning light illuminates:

• When one of the exterior bulbs (headlight, DRL, turn signal lamp, stop lamp, etc) is not operating properly. One of the bulbs may need to be replaced.

Information
Make sure to replace the burned out bulb with a new one of the same wattage rating.

LED headlight warning light (if equipped)

This warning light illuminates:

• When you set the Engine Start/Stop button to the ON position.
  • The LED headlight warning light illuminates for approximately 3 seconds and then goes off.
• Whenever there is a malfunction with the LED headlight.
  If this occurs, have your vehicle inspected by an authorized HYUNDAI dealer.

NOTICE
Continuous driving with the LED Headlight warning light on or blinking can reduce LED headlight life.

High Beam Indicator Light

This indicator light illuminates:

• When the headlights are on and in the high beam position.
•  When the turn signal lever is pulled into the Flash-to-Pass position.

Light ON Indicator Light

This indicator light illuminates:
When the tail lights or headlights are on.

High Beam Assist indicator light (if equipped)

This indicator light illuminates:
When the High Beam is on with the light switch in the AUTO light position.

•  White: When High Beam Assist is ready to operate.
•  Green: When High Beam Assist is operating.

If your vehicle detects oncoming or preceding vehicles, High Beam Assist system will switch the high beam to low beam automatically.
For more information, refer to “High Beam Assist (HBA)” in chapter 5.

Forward Collision-Avoidance Assist Warning Light (if equipped)

This warning light illuminates:

• When you set the ignition switch or Engine Start/Stop button to the ON position.
  • It illuminates for approximately 3 seconds and then goes off.
• When there is a malfunction with  FCA. In this case, have your vehicle inspected by an authorized dealer of HYUNDAI.

For more information, refer to “Forward Collision-Avoidance Assist (FCA)” in chapter 6.

Lane Keep Assist Indicator Light (if equipped)

This indicator light illuminates:

• [Green] When you activate the lane departure warning system by pressing the Lane Safety button all of the system operating conditions are satisfied.
• [White] When function operating conditions are not satisfied or when the sensor does not detect the lane line.
• [Yellow] When there is a malfunction with the Lane Keeping Assist system.
  In this case, have your vehicle inspected by an authorized HYUNDAI dealer.

For more information, refer to “Lane Keeping Assist (LKA)” in chapter 6.

Cruise Indicator Light

This indicator light illuminates: When the cruise control system is enabled. For more details, refer to “Cruise Control System” in chapter 6.

SPORT Mode Indicator Light(if equipped)

This indicator light illuminates:

•  When you select “SPORT” mode as drive mode.

For more details, refer to “Drive Mode Integrated Control System” in chapter

SMART Mode Indicator Light (if equipped)

This indicator light illuminates:

• When you select ‘’SMART” mode as drive mode.

For more details, refer to “Drive Mode Integrated Control System’’ in chapter 6.

Icy Road Warning Light (if equipped)

This indicator light illuminates:
This warning light is to warn the driver the road may be icy.
When the temperature on the outside temperature gauge is approximately below 40°F (4°C), the Icy Road Warning Light and Outside Temperature Gauge blinks and then illuminate. Also, the warning chime sounds 1 time.
The Icy Road Warning function can be activated or deactivated from the User Settings mode in the cluster LCD display.

Information
If the icy road warning light appears while driving, you should drive more attentively and safely, refraining from over-speeding, rapid acceleration, sudden braking or sharp turning, etc.

LCD Display Messages

Shift to P or N to start the engine(for the smart key system)
This warning message is displayed if you try to start the engine with the shift button not in the P (Park) or N (Neutral) position.

Information
You can start the engine with the shift button in the N (Neutral) position. But, for your safety, have you started the engine with the shift button in the P (Park) position?

Shift to P (for smart key system and intelligent variable transmission)
This message is displayed if you try to turn off the engine without the shift button in P (Park) position.
If this occurs, the Engine Start/Stop button turns to the ACC position (If you press the Engine Start/Stop button once more, it will turn to the ON position).

Low key battery(for the smart key system)
This warning message is displayed if the battery of the smart key is discharged while changing the Engine Start/Stop button to the OFF position.

Press the brake pedal to start the engine (for smart key system and intelligent variable transmission)
This warning message is displayed if the Engine Start/Stop button changes to the ACC position twice by pressing the button repeatedly without depressing the brake pedal.
You can start the vehicle by depressing the brake pedal and then pressing the Engine Start/Stop button.

Press clutch pedal to start the engine (for smart key system and manual transmission)
This warning message is displayed if the Engine Start/Stop button is in the ACC position twice by pressing the button repeatedly without depressing the clutch pedal.
Depress the clutch pedal to start the engine.

Key not in a vehicle (for the smart key system)
This warning message is displayed if the smart key is not in the vehicle when you press the Engine Start/Stop button.
When attempting to start the vehicle, always have the smart key with you.

Key not detected (for the smart key system)
This warning message is displayed if the smart key is not detected when you press the Engine Start/Stop button.

Press the START button again (for the smart key system)
This message is displayed if you were unable to start the vehicle when the Engine Start/Stop button was pressed.
If this occurs, attempt to start the engine by pressing the Engine Start/Stop button again.
If the warning message appears each time you press the Engine Start/Stop button, have your vehicle inspected by an authorized HYUNDAI dealer.

Battery discharging due to external electrical devices (if equipped)
This message is displayed if the battery voltage is weak due to any non-factory electrical accessories (ex. dashboard camera) while parking. Be careful that the battery is not discharged.
If the warning message appears after removing the non-factory electrical accessories, have the vehicle inspected by an authorized HYUNDAI dealer.

Press the START button with the key (for the smart key system)
This warning message is displayed if you press the Engine Start/Stop button while the warning message “Key not detected” is displayed.

At this time, the immobilizer indicator light blinks.
Check BRAKE SWITCH fuse (for smart key system and automatic transmission/intelligent variable transmission)
This warning message is displayed if the brake switch fuse is disconnected.
You need to replace the fuse with a new one before starting the engine.
If that is not possible, you can start the engine by pressing the Engine Start/Stop button for 10 seconds in the ACC position.

Door, Hood, Trunk Open Indicator

This warning is displayed if any door or the hood or the liftgate is left open. The warning will indicate which door is open in the display.

CAUTION
Before driving the vehicle, you should confirm that the door/hood/liftgate are fully closed. Also, check there is no door/hood/liftgate open warning light or message displayed on the instrument cluster.

Sunroof Open (if equipped)

This warning is displayed if you turn off the engine when the sunroof is open.
Close the sunroof securely before leaving your vehicle.

Low Pressure

This indicator displays which exterior light is selected using the lighting control.

Wiper

This indicator displays which wiper speed is selected using the wiper control.

The heated Steering Wheel turned off (if equipped)
This message is displayed if you turn off the heated steering wheel. For more details, refer to “Heated Steering Wheel” in chapter 5.

Low washer fluid (if equipped)
This warning message is displayed if the washer fluid level in the reservoir is nearly empty. Have the washer fluid reservoir refilled.

Low fuel
This warning message is displayed if the fuel tank is almost out of fuel. When this message is displayed, the low fuel level warning light in the cluster will come on. It is recommended to look for the nearest fueling station and refuel as soon as possible.

Engine Overheated (if equipped)
This warning message is displayed when the engine coolant temperature is above 248°F (120°C). This means that the engine is overheated and may be damaged. If your vehicle is overheated, refer to “Overheating” in chapter 8.

Check the headlight (if equipped)
This warning message is displayed if the headlights are not operating properly. In addition, if a specific lamp(turn signal lamp etc.) is not operating properly, the warning message according to a specific lamp (turn signal lamp, etc.) is displayed. A corresponding bulb may need to be replaced. Make sure to replace the burned-out bulb with a new one with the same wattage rating.

Check turn signal (if equipped)
This warning message is displayed if the turn signal lamps are not operating properly. A lamp may need to be replaced. Make sure to replace the burned-out bulb with a new one with the same wattage rating.

Check brake light (if equipped)
This warning message is displayed if the stop lamps are not operating properly. A lamp may need to be replaced. Make sure to replace the burned-out bulb with a new one with the same wattage rating.

Check the daytime running light (if equipped)
This warning message is displayed if the daytime running lights are not operating properly. A lamp may need to be replaced. Make sure to replace the burned-out bulb with a new one with the same wattage rating.

Check high-mounted stop lamp (if equipped)
This warning message is displayed if the high-mounted stop lamp is not operating properly. A lamp may need to be replaced. Make sure to replace the burned-out bulb with a new one with the same wattage rating.

Check headlight LED (if equipped)
This warning message is displayed if there is a problem with the LED headlight. Have the vehicle inspected by an authorized HYUNDAI dealer.

Check Forward Collision-Avoidance Assist system (if equipped)
This warning message is displayed if there is a problem with Forward Collision-Avoidance Assist. Have the vehicle inspected by an authorized HYUNDAI dealer. For more details, refer to “Forward Collision-Avoidance Assist (FCA)” in chapter 6.

Check Lane Keeping Assist system (if equipped)
This warning message is displayed if there is a problem with Lane Keeping Assist. Have the vehicle inspected by an authorized HYUNDAI dealer. For more details, refer to “Lane Keeping Assist (LKA)” in chapter 6.

Check Blind-Spot Collision Warning system (if equipped)
This warning message is displayed if there is a problem with the Blind-Spot Collision Warning. Have the vehicle inspected by an authorized HYUNDAI dealer. For more details, refer to “Blind-Spot Collision Warning (BCW) ” in Chapter 6.

Check the Driver Attention Warning system (if equipped)
This warning message is displayed if there is a problem with Driver Attention Warning. Have the vehicle inspected by an authorized HYUNDAI dealer. For more details, refer to “Driver Attention Warning (DAW)” in chapter 6.

Check the High Beam Assist system(if equipped)
This warning message is displayed if there is a problem with the High Beam Assist. Have the vehicle inspected by an authorized HYUNDAI dealer. For more details, refer to “High Beam Assist (HBA)” in chapter 5.

Check the Smart Cruise Control system (if equipped)
This warning message is displayed if there is a problem with Smart Cruise Control. Have the vehicle inspected by an authorized HYUNDAI dealer. For more details, refer to “Smart Cruise Control (SCC)” in chapter 6.

FAQ