Hyundai Elantra 2023 Windshield defrosting and defogging and Other Convenience Features 

Here is your guide to a clear and comfortable driving experience in any weather: the 2023 Hyundai Elantra Windshield Defrosting, Defogging, and Features Guidelines. This thorough guide is your reliable travel companion as you go out with this cutting-edge car. It provides crucial information about how the windshield defrosts and defoggs, maximizing visibility and safety on chilly mornings or in humid weather. Hyundai’s dedication to convenience, safety, and a clear view is evident in everything from comprehending the features that enable quick defrosting to becoming proficient with the climate control settings and windshield wiper functions. This guarantees that every drive in your 2023 Elantra is not only comfortable but also devoid of visibility issues.

2023 Hyundai Elantra Specs, Price, Features, Milage (Brochure)

Windshield Defrosting and Defogging

WARNING

Windshield Heating
Do not use the or position during cooling operations in extremely humid weather. The difference between the temperature of the outside air and that of the windshield could cause the outer surface of the windshield to fog up, causing loss of visibility. In this case, set the mode selection knob or button to the position and fan speed control knob or button to lower speed.

• For maximum defrost performance, set the temperature control knob to the highest temperature setting (rotated all the way to the right) and the fan speed control to the highest setting.
• If warm air to the floor is desired while defrosting or defogging, set the mode to the floor-defrost position.
• Before driving, clear all snow and ice from the windshield, rear window, side view mirrors, and all side windows.
• Clear all snow and ice from the hood and air inlet in the cowl grill to improve the heater and defroster efficiency and to reduce the probability of fogging up inside of the windshield.

Manual Climate Control System

To Defog Inside Windshield

[A]: Type A, [B]: Type B

1. Select any fan speed except the “0” position.
2. Select the desired temperature.
3. Select the position.
4.  Fresh-mode air will be selected automatically. Additionally, the air conditioning (if equipped) will automatically operate if the mode is selected to the position.

If the air conditioning and fresh mode are not selected automatically, press the corresponding button manually.

To defrost the outside windshield

[A]: Type A, [B]: Type B

1. Set the fan speed to the highest setting (knob rotated all the way to the right).
2. Set the temperature control to the highest temperature setting.
3. Select the position.
4. Fresh-mode air and air conditioning (if equipped) will be selected automatically

Automatic Climate Control System

To defog inside windshield

1. Select the desired fan speed.
2. Select the desired temperature.
3. Press the defroster button ( ).
4. The air-conditioning will turn on according to the detected ambient temperature, and fresh mode, and higher fan speed will be selected automatically.

If the air-conditioning, fresh mode, and higher fan speed are not selected automatically, adjust the corresponding button or knob manually.
If the position is selected, the lower fan speed is controlled to a higher fan speed

To defrost the outside windshield

1. Set the fan speed to the highest position.
2. Set the temperature to the extremely hot (HI) position.
3. Press the defroster button ( ).
4. The air-conditioning will turn on according to the detected ambient temperature and fresh mode will be selected automatically.

If the position is selected, the lower fan speed is controlled to a higher fan speed.

Defogging Logic (if equipped)

To help reduce the probability of fogging up the inside of the windshield, the air intake or air conditioning is controlled
automatically according to certain conditions such as position. To cancel or return the defogging logic, do the following

Manual climate control system

1.  Turn the ignition switch to the ON position.
2. Select defroster mode ( ).
3. Press the air intake control button at least 5 times within 3 seconds. The process should be completed within 10 seconds after the defroster mode ( ) is selected.

The LED indicator on the air intake button will blink 3 times to indicate that the defogging logic has been disabled.
Repeat the steps again to re-enable the defogging logic.
If the battery has been discharged or disconnected, it resets to the defog logic status.
Automatic climate control system

1.  Turn the ignition switch to the ON position.
2. Press the defroster button ( ).
3. While pressing the air conditioning button (A/C), press the air intake control button at least 5 times within 3 seconds.

The automatic climate control information screen will blink 3 times to indicate that the defogging logic has been disabled.
Repeat the steps again to re-enable the defogging logic.
If the battery has been discharged or disconnected, it resets to the defog logic status.

Auto Defogging System (only for automatic climate control system, if equipped)

Auto defogging helps reduce the possibility of fogging up the inside of the windshield by automatically sensing the moisture on inside the windshield.
The auto-defogging system operates when the heater or air conditioning is on.
When the Auto Defogging System operates, the indicator will illuminate.
If a high amount of humidity is detected in the vehicle, the Auto Defogging System will be enabled.
The following steps will be performed automatically:
Step 1) The A/C button will turn ON.
Step 2) The air intake control will change to Fresh mode under low outside temperatures.
Step 3) The mode will be changed to defrost to direct airflow to the windshield.
Step 4) The fan speed will be increased

To cancel or reset the Auto Defogging System
Press the front windshield defroster button for 3 seconds when the ignition switch is in the ON position.
When the Auto Defogging System is canceled, the defrost button indicator will blink 3 times.
When the Auto Defogging System is reset, the defrost button indicator will blink 6 times without a signal.

Information

• When the air conditioning is turned on by an auto-defogging system, if you try to turn off the air conditioning, the indicator will blink 3 times and the air conditioning will not be turned off.
• To maintain the effectiveness and efficiency of the Auto Defogging System, do not select Recirculation mode while the system is operating.
• When the Auto Defogging System is operating, the fan speed adjustment knob, the temperature adjustment knob, and the air intake control button are all disabled

NOTICE
Do not remove the sensor cover located on the upper end of the driver-side windshield glass.
Damage to system parts could occur and may not be covered by your vehicle warranty.

Defroster

NOTICE
To prevent damage to the conductors bonded to the inside surface of the rear window, never use sharp instruments or window cleaners containing abrasives to clean the window.
Information
If you want to defrost and defog the front windshield, refer to “Windshield
Defrosting and Defogging” in this chapter.

Rear window defroster

The defroster heats the window to remove frost, fog, and thin ice from the interior and exterior of the rear window, while the engine is running.

• To activate the rear window defroster, press the rear window defroster button located in the center facia switch panel. The indicator on the rear
  window defroster button illuminates when the defroster is ON.
• To turn off the defroster, press the rear window defroster button again.

Climate control additional features

Sunroof Inside Air Recirculation(if equipped)

When the sunroof is opened, outside (fresh) air will be automatically selected. At this time, if you press the air intake control button, the recirculated air position will be selected but will change back to outside (fresh) air after 3 minutes. When the sunroof is closed, the air intake position will return to the original position that was selected.

Auto Comfort Control (for driver’s seat) (if equipped)

The temperature of the driver’s seat warmer, air ventilation seat, and the heated steering wheel is automatically controlled depending on the inside and outside temperature of the vehicle when the engine is running. To use this function, it must be activated from the Settings menu on the Infotainment System screen. Select:

• All menu  setup vehicle heated / Ventilated Features
  For more details on Auto Comfort Control, refer to “Seat warmers and air ventilation seat” in Chapter 3, and “Heated steering wheel” in Chapter 5

Automatic Ventilation (if equipped)

The system automatically selects the fresh mode when the climate control system operates over a certain period of time (approximately 30 minutes) in low temperatures with the recirculation mode selected. To cancel or reactivate the Automatic Ventilation When the air conditioning system is on, select Face Level mode and press the air recirculation mode button at least 5 times within 3 seconds while pressing the A/C button. When the automatic ventilation is canceled, the indicator blinks 3 times. When the automatic ventilation is activated, the indicator blinks 6 times.

Storage compartment

WARNING
Never store cigarette lighters, propane cylinders, or other flammable/explosive materials in the vehicle. These items may catch fire and/or explode if the vehicle is exposed to hot temperatures for extended periods.

WARNING
ALWAYS keep the storage compartment covers closed securely while driving. Items inside your vehicle are moving as fast as the vehicle. If you have to stop or turn quickly, or if there is a crash, the items may fly out of the compartment and may cause an injury if they strike the driver or a passenger.

NOTICE
To avoid possible theft, do not leave valuables in the storage compartments.

Center Console Storage

To open:
Grab and hold the latch on the armrest then lift the lid.

Glove Box

To open:
Pull the lever (1).

WARNING
ALWAYS close the glove box door after use. An open glove box door can cause serious injury to the passenger in an accident, even if the passenger is wearing a seat belt.

INTERIOR FEATURES

Cup Holder (if equipped) Front

Rear

Cups or small beverage cups may be placed in the cup holders.

WARNING

• Avoid abrupt starting and breaking when the cup holder is in use to prevent spilling your drink. If hot liquid spills, you could be burned. Such a burn to the driver could cause loss of vehicle control resulting in an accident.
• Do not place uncovered or unsecured cups, bottles, cans, etc., in the cup holder containing hot liquid while the vehicle is in motion. Injuries may result in the event of a sudden stop or collision.
• Only use soft cups in the cup holders. Hard objects can injure you in an accident.

WARNING
Keep cans or bottles out of direct sunlight and do not put them in a hot vehicle. It may explode.

NOTICE

• Keep your drinks sealed while driving to prevent spilling your drink. If liquid spills, it may get into the vehicle’s electrical/electronic system and damage electrical/electronic parts.
•  When cleaning spilled liquids do not use hot air to blow out or dry the cup holder. This may damage the interior.

Sunvisor

• To use a sunvisor, pull it downward.
• To use a sunvisor for a side window, pull it downward, unsnap it from the bracket (1), and swing it to the side (2).
• To use the vanity mirror, pull down the sun visor and slide the mirror cover (3).
• Adjust the sunvisor forward or backward (4, if equipped) as needed.
• Use the ticket holder (5) to hold tickets.
• Close the vanity mirror cover securely and return the sunvisor to its original position after use.

NOTICE
Close the vanity mirror cover securely and return the sunvisor to its original position after use.

Power Outlet

The power outlet is designed to provide power for mobile telephones or other devices designed to operate with vehicle electrical systems. The devices should draw less than 180 W with the engine running.

WARNING
Avoid electrical shocks. Do not place your fingers or foreign objects (pin, etc.) into a power outlet or touch the power outlet with a wet hand.

NOTICE
To prevent damage to the Power Outlets:

• Use the power outlet only when the engine is running and remove the accessory plug after use. Using the accessory plug for prolonged periods of time with the engine off could cause the battery to discharge.
• Only use 12V electric accessories that are less than 180 W in electric capacity.
•  Adjust the air-conditioner or heater to the lowest operating level when using the power outlet.
• Close the cover when not in use.
• Some electronic devices can cause electronic interference when plugged into a vehicle’s power outlet. These devices may cause excessive audio static and malfunctions in other electronic systems or devices used in your vehicle.
• Push the plug in as far as it will go. If good contact is not made, the plug may overheat and the fuse may open.
• Plug in battery-equipped electrical/ electronic devices with reverse current protection. The current from the battery may flow into the vehicle’s electrical/electronic system and cause system malfunction.

USB Charger

Insert the USB charger into the USB port, and re-charge a smartphone or a tablet PC.

• A charging status/charging completion message is displayed on the screen of a smartphone or a tablet PC.
• A smartphone or a tablet PC may get warmer during the re-charging process. It does not indicate any malfunction with the charging system.
• A smartphone or a tablet PC, which adopts a different re-charging method, may not be properly re-charged. In this case, use an exclusive charger of your device.
• The charging terminal is only to recharge a device. Do not use the charging terminal either to turn ON audio or to play media on the infotainment system.

Wireless Cellular Phone Charging System (if equipped)

[A]: Charging pad
There is a wireless cellular phone charger inside the front console. The system is available when all doors are closed, and when the ignition switch is in the ON position.

1. Remove other items, including the smart key, from the wireless charging unit. If not, the wireless charging process may be interrupted. Place the cellular phone in the center of the charging pad ( ).
2. When charging starts, a charging icon is displayed on the infotainment system screen. However, depending on the infotainment system screen, the wireless charging icon may not be displayed. See the infotainment web manual for details.
3.  You can turn on the wireless charging function in the user settings mode on the instrument cluster. For further information, refer to the “LCD Display Modes” in this chapter.

The system warns you with a message on the LCD display if the cellular phone is still on the wireless charging unit after the engine is turned OFF and the front door is opened.

Information
For some manufacturers’ cellular phones, the system may not warn you even though the cellular phone is left on the wireless charging unit. This is due to the particular characteristic of the cellular phone and not a malfunction of the wireless charging.

To charge a cellular phone
The wireless cellular phone charging system charges only Qi-enabled cellular phones. Read the label on the cellular phone accessory cover or visit your cellular phone manufacturer’s website to check whether your cellular phone supports the Qi technology.
The wireless charging process starts when you put a Qi-enabled cellular phone on the wireless charging unit.

NOTICE

• The wireless cellular phone charging system may not support certain cellular phones, which are not verified for the Qi specification ( ).
• When placing your cellular phone on the charging mat, position the phone in the middle of the mat for optimal charging performance. If your cellular phone is off to the side, the charging rate may be less and in some cases, the cellular phone may experience higher heat conduction.
• In some cases, the wireless charging may stop temporarily when the Remote Key or Smart Key is used, either when starting the vehicle or locking/unlocking the doors, etc.
• The wireless charging process may temporarily stop when the temperature abnormally increases inside the wireless cellular phone charging
  system. Stop the charging cellular phone and wait until the temperature falls to a certain level.
• The wireless charging process may temporarily stop when there is any metallic item, such as a coin, between the wireless cellular phone charging system and the cellular phone.
• When charging some cellular phones with a self-protection feature, the wireless charging speed may decrease and the wireless charging may stop.
• If the cellular phone has a thick cover, wireless charging may not be possible.
• If the cellular phone is not completely contacting the charging pad, wireless charging may not operate properly.
• Some magnetic items like credit cards, phone cards, or rail tickets may be damaged if left with the cellular phone during the charging process.
• When any cellular phone without a wireless charging function or a metallic object is placed on the charging pad, a small noise may sound. This small sound is due to the vehicle’s discerning compatibility of the object placed on the charging pad. It does not affect your vehicle or, the cellular phone in any way.

Information
If the ignition switch is in the LOCK/ OFF position, the charging also stops.
Information
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Clock

WARNING
Do not attempt to adjust the clock while driving. Doing so may result in distracted driving which may lead to an accident involving personal injury or death.
For more information, please refer to the manual that was supplied with your vehicle.

Clothes Hanger

These hangers are not designed to hold large or heavy items.
WARNING
Do not hang other objects such as hangers or hard objects except clothes. Also, do not put heavy, sharp, or breakable objects in the clothes pockets. In an accident or when the curtain airbag is inflated, it may cause vehicle damage or personal injury.

2023 Hyundai Elantra Specs, Price, Features, Milage (Brochure)

Information system

NOTICE

•  If you install an aftermarket HID headlight, your vehicle’s audio and electronic devices may not function properly.
•  Prevent chemicals such as perfume, cosmetic oil, sunscreen, hand cleaner, and air freshener from contacting the interior parts because they may cause damage or discoloration.

USB Port

You can use a USB port to plug in a USB.
Information
When using a portable audio device connected to the power outlet, noise may occur during playback. If this happens, use the power source of the portable audio device.

Antenna

Shark fin antenna (1, if equipped)
The shark fin antenna receives data transmitted from base stations and satellites (for example GPS, Sirus XM, LTE) and also transmits to base stations (for example: LTE).

Glass antenna (2)
Your vehicle uses a glass antenna to receive both AM and FM signals

WARNING

• Do not clean the inside of the rear window glass with a cleaner or scraper to remove foreign deposits as this may cause damage to the antenna elements.
• To prevent damage to the rear glass antenna, never use sharp instruments or window cleaners containing abrasives to clean the window. Clean the inside surface of the rear glass window with a piece of soft cloth.
• Avoid adding metallic coatings such as Nickel, Cadmium, etc. These can degrade the receiving AM and FM broadcast signals.
• When putting a sticker on the inside surface of the rear window, be careful not to damage the rear glass antenna.
• Do not put sharp instruments near the rear glass antenna.
• A tinted rear window may affect the proper functioning of the antenna.

Steering Wheel Audio Control

The steering wheel audio control switches are installed for your convenience.

NOTICE
Do not operate audio remote control buttons simultaneously.
VOLUME (VOL + / VOL -) (1)

• Move the VOLUME toggle switch up to increase volume.
• Move the VOLUME toggle switch down to decrease volume.

SEEK/PRESET ( / ) (2)
If the SEEK/PRESET toggle switch is moved up or down and held for 0.8 seconds or more, it will function in the following modes.

• RADIO mode
  It will function as the AUTO SEEK select switch. It will SEEK until you release the switch.
•  MEDIA mode
  It will function as the FF/REW switch.
  If the SEEK/PRESET toggle switch is moved up or down, it will function in the following modes.
• RADIO mode
  It will function as the PRESET STATION UP/DOWN switch.
• MEDIA mode
  It will function as the TRACK-UP/ DOWN switch.

MODE ( )(3)
Press the MODE button to select Radio.

Voice recognition button ( ) (4)

• Start or end voice recognition of a connected smartphone via phone projection. (The button’s operation may vary depending on smartphone specifications.)

Information
Detailed information for audio control buttons is described in the following pages in this chapter.

Infotainment System (if equipped)

If your vehicle is equipped with additional navigation, please refer to the infotainment system manual separately supplied.

Voice Recognition (if equipped)

A wide range of infotainment functions can be commanded with voice recognition.
If your vehicle is equipped with additional navigation, please refer to the infotainment system manual separately supplied

Bluetooth® Wireless Technology Hands-free (if equipped)

You can use the phone wirelessly by using the Bluetooth® Wireless  Technology.

1. Call / Answer button
2. Call end button
3.  LHD Microphone
4.  RHD Microphone

•  Audio: For detailed information, refer to “AUDIO” in this chapter.
• Navigation: Detailed information for the Bluetooth® Wireless Technology hands-free is described in the manual supplied separately

How Vehicle Radio Works

FM reception

AM and FM radio signals are broadcast from transmitter towers located around your city. They are intercepted by the radio antenna on your vehicle. This signal is then received by the radio and sent to your vehicle speakers.
When a strong radio signal has reached your vehicle, the precise engineering of your audio system ensures the best possible quality reproduction. However, in some cases, the signal coming to your vehicle may not be strong and clear.
This can be due to factors, such as the distance from the radio station, the closeness of other strong radio stations, or the presence of buildings, bridges, or other large obstructions in the area.

AM (MW, LW) reception

AM broadcasts can be received at greater distances than FM broadcasts. This is because AM radio waves are transmitted at low frequencies. These long, low-frequency radio waves can follow the curvature of the earth rather than traveling straight out into the atmosphere. In addition, they curve around obstructions so that they can provide better signal coverage.

 

FM radio station

FM broadcasts are transmitted at high frequencies and do not bend to follow the earth’s surface. Because of this, FM broadcasts generally begin to fade at short distances from the station. Also, FM signals are easily affected by buildings, mountains, or other obstructions.

 

These can result in certain listening conditions which might lead you to believe a problem exists with your radio. The following conditions are normal and do not indicate radio trouble :

•  Fading as your vehicle moves away from the radio station, the signal will weaken and the sound will begin to fade. When this occurs, we suggest that you select another stronger station.
• Flutter/Static Weak FM signals or large obstructions between the transmitter and your radio can disturb the signal causing static or fluttering noises to occur. Reducing the treble level may lessen this effect until the disturbance clears.

 

• Station Swapping As an FM signal weakens, another more powerful signal near the same frequency may begin to play. This is because your radio is designed to lock onto the clearest signal. If this occurs, select another station with a stronger signal.
• Multi-Path Cancellation Radio signals being received from several directions can cause distortion or fluttering. This can be caused by a direct and reflected signal from the same station, or by signals from two stations with close frequencies. If this occurs, select another station until the condition has passed.

Using a cellular phone or a two-way radio
When a cellular phone is used inside the vehicle, noise may be produced from the audio system. This does not mean that something is wrong with the audio equipment. In such a case, use the cellular phone at a place as far as possible from the audio equipment.

NOTICE
When using a communication system such as a cellular phone or a radio set inside the vehicle, a separate external antenna must be fitted. When a cellular phone or a radio set is used with an internal antenna alone, it may interfere with the vehicle’s electrical system and adversely affect the safe operation of the vehicle.

WARNING
Do not use a cellular phone while driving. Stop at a safe location to use a cellular phone.

FAQ