Hyundai Elantra Hybrid 2023 Steering Wheel

The Hyundai Elantra Hybrid 2023 is a compact hybrid sedan that offers a range of features to improve the driving experience. The steering wheel of the Elantra Hybrid is designed to provide comfort and control to the driver, and it comes with mounted controls for audio, Bluetooth, and cruise control buttons for easy access to commonly used functions while driving. Additionally, the Elantra Hybrid is equipped with power mirrors and windows, which can be controlled with the touch of a button. The power mirrors enable remote adjustments of the mirrors’ angle without requiring physical adjustments, while the power windows provide convenience and comfort by allowing easy rolling up or down of the windows. Furthermore, the mirrors and windows of the Elantra Hybrid are designed to be durable and easy to maintain. The mirrors have a heating system that helps to clear frost and fog during cold weather, while the windows are made of high-quality materials that resist scratches and chips. In summary, the steering wheel, mirrors, and windows of the Hyundai Elantra Hybrid 2023 are crafted to improve the driving experience by offering comfort, convenience, and control.

2023 Hyundai Elantra Specs, Price, Features, Milage (Brochure)

Steering Wheel

Motor Driven Power Steering (MDPS)

The system assists you with steering the vehicle. If the vehicle is turned off or if the power steering system becomes inoperative, you may still steer the vehicle, but it will require increased steering effort. Also, the steering effort becomes heavier as the vehicle’s speed increases and becomes lighter as the vehicle’s speed decreases for better control of the steering wheel. Should you notice any change in the effort required to steer during normal vehicle operation, have the system checked by an authorized HYUNDAI dealer.

CAUTION
If the Motor Driven Power Steering  System does not operate normally, the warning light ( ) will illuminate the instrument cluster. You may steer the vehicle, but it will require increased steering efforts. Take your vehicle to an authorized HYUNDAI dealer and have the system checked as soon as possible. When an abnormality is detected in the Motor Driven Power Steering system, to prevent an accident, the steering assist function may become inoperative. At this time, the warning light turns on or blinks on the cluster. The steering wheel may become difficult to control or operate. Have your vehicle checked immediately, after moving the vehicle to a safe area.

Information
The following symptoms may occur during normal vehicle operation:

• The steering effort may be high immediately after placing the ignition switch in the ON position.
  This happens as the system performs the MDPS system diagnostics. When the diagnostics are completed, the steering wheel effort will return to its normal condition.
• When the battery voltage is low, you may have to put more steering effort. However, it is a temporary condition so it will return to normal condition after charging the battery.
• A click noise may be heard from the MDPS relay after the ignition switch is in the ON or LOCK/OFF position.
• Motor noise may be heard when the vehicle is at a stop or at a low driving speed.
• When you operate the steering wheel in low temperatures, abnormal noise may occur. If the temperature rises, the noise will disappear. This is a normal condition.
• When an error is detected from the MDPS, the steering effort assist function may become inoperative
  in order to prevent fatal accidents. Instrument cluster warning lights may be on or the steering effort may be high. If these symptoms occur, drive the vehicle to a safe area as soon as it is safe to do so. Have the system checked by an authorized HYUNDAI dealer as soon as possible.

Tilt Steering / Telescope Steering

When adjusting the steering wheel to a comfortable position, adjust the steering wheel so that it points toward your chest, not toward your face. Make sure you can see the instrument cluster warning lights and gauges. After locking the lever, push the steering wheel both up and down to be certain it is locked in position. Always adjust the position of the steering wheel before driving.

WARNING
NEVER adjust the steering wheel while driving. This may cause loss of vehicle control resulting in an accident.

To adjust the steering wheel angle and height:

1. Pull down the lock-release lever (1).
2. Adjust the steering wheel to the desired angle (2) and distance forward/back (3).
3. pull up the lock-release lever to lock the steering wheel in place.

Information
Sometimes the lock release lever may not engage completely. This may occur when the gears of the locking mechanism do not completely mesh. If this occurs, pull down on the lock release lever, readjust the steering wheel again, and then pull back up on the release lever to lock the steering wheel in place.

CAUTION
While adjusting the steering wheel height, please do not push or pull it hard since the fixture can be damaged.

Horn

To sound the horn, press the area indicated by the horn symbol on your steering wheel (see illustration). The horn will operate only when this area is pressed.

NOTICE
Do not strike the horn severely to operate it, or hit it with your fist. Do not press on the horn with a sharp-pointed object.

Mirrors

Inside Rearview Mirror

Before driving your vehicle, check to see that your inside rearview mirror is properly positioned. Adjust the rearview mirror so that the view through the rear window is properly centered.

WARNING
Make sure your line of sight is not obstructed. Do not place objects in the rear seat, cargo area, or behind the rear head restraints which could interfere with your vision through the rear window.

WARNING
To prevent serious injury during an accident or deployment of the airbag, do not modify the rearview mirror and do not install a wide mirror.

WARNING
NEVER adjust the mirror while driving. This may cause loss of vehicle control resulting in an accident.

NOTICE
When cleaning the mirror, use a paper towel or similar material dampened with glass cleaner. Do not spray glass cleaner directly on the mirror as this may cause the liquid cleaner to enter the mirror housing.

Day/night rearview mirror (if equipped)

[A]: Lever, [B]: Day, [C]: Night Make this adjustment before you start driving and while the day/night lever is in the day position. Pull the day/night lever towards you to reduce glare from the headlights of the vehicles behind you during night driving. Remember that you lose some rearview clarity in the night position.

Electrochromic mirror (ECM) with HomeLink® system (if equipped)

Your vehicle may be equipped with a Gentex Automatic-Dimming Mirror with an Integrated HomeLink® Wireless Control System. During nighttime driving, this feature will automatically detect and help reduce rearview mirror glare. The HomeLink® Universal Transceiver allows you to activate your garage door(s), electric gate, home lighting, etc.

1.  HomeLink Channel 1
2. HomeLink Channel 2
3.  HomeLink Channel 3
4. Garage Door Opener Status Indicator: Closing or Closed
5. HomeLink Operation Indicator
6. Garage Door Opener Status Indicator: Opening or Opened
7.  HomeLink User Interface Indicator

Automatic-Dimming Night Vision Safety™ (NVS®) Mirror (if equipped)
The NVS® Mirror automatically helps reduce glare by monitoring light levels in the front and rear of the vehicle. Any object that obstructs either light sensor will degrade the automatic dimming control feature.
For more information regarding NVS® mirrors and other applications, please refer to the Gentex website: www.gentex.com
Your mirror will automatically dim upon detecting glare from the vehicles traveling behind you. The mirror defaults to the ON position each time the vehicle is started.

Integrated HomeLink® Wireless Control System
The HomeLink® Wireless Control System can replace up to three hand-held radio-frequency (RF) transmitters with a single built-in device. This innovative feature will teach the radio frequency codes of most current transmitters to operate devices such as gate operators, garage door openers, entry door locks, security systems, and even home lighting. Both standard and rolling code-equipped transmitters can be programmed by following the outlined procedures. Additional HomeLink® information can be found at: www.homelink.com, www.youtube.com/HomeLinkGentex, or by calling 1-800-355-3515. Retain the original transmitter of the RF device you are programming for use in other vehicles as well as for future HomeLink® programming. It is also suggested that upon the sale of the vehicle, the programmed HomeLink® buttons be erased for security purposes.

WARNING
Before programming HomeLink® to a garage door opener or gate operator, make sure people and objects are out of the way of the device to prevent potential harm or damage. Do not use the HomeLink® with any garage door opener that lacks safety stop and reverse features required by U.S. federal safety standards (this includes any garage door opener model manufactured before April 1, 1982). A garage door that cannot detect an object – signaling the door to stop and reverse – does not meet current U.S. federal safety standards. Using a garage door opener without these features increases the risk of serious injury or death.

Programing HomeLink®
Please note the following:

• opener, it is advised to park the vehicle outside of the garage. be placed in the hand-held transmitter of the device being programmed to HomeLink® for quicker training and accurate transmission of the radio-frequency signal. Engine Start/Stop button to be in the ACC (or “Accessories”) position for programming and/or operation of HomeLink®. programming difficulties or questions after following the programming steps listed below, contact HomeLink® at: www.homelink.com, www.youtube.com/HomeLinkGentex, or by calling 1-800-355-3515.

Programming
To program most devices, follow these instructions:

1.  Press and release (1), (2) or (3) button.
   • Orange, go to Step 3) since it is new programming.
   • turned ON or flashes in Green rapidly several times, go to Step 2) since it is a programmed button.
2. Press and hold the button you wish to program for approximately 15- 25 seconds until the LED flashes in Orange for several times.
3. Hold the Garage Door Opener’s Original Transmitter near the HomeLink Mirror.
   
4. Press the Original Transmitter button until the indicator (4) is turned continuously ON or flashes in Green for approximately 10 seconds and it indicates the programming is completed.
5. However, indicator (4) flashes in Green continuously, but if the garage door opener does not operate, please continue to follow steps 6 and 7 (“Rolling Code Programing” procedures).
6. Firmly press and release the “Learn,” “Smart,” or “Program” buttons while the indicator (4) flashes in Green. Once the button is pressed, you have approximately 30 seconds to initiate the next step.

Information
At the garage door opener motor, (security gate motor, etc.) locate the “Learn,” “Smart,” or “Program” button. This can usually be found where the hanging antenna wire is attached to the motor-head unit (see the device’s manual to identify this button). The name and color of the button may vary by manufacturer. A ladder and/or second person may simplify the following steps. Return to the vehicle and firmly press, hold for two seconds, and release the HomeLink button up to three times. Do not press the HomeLink button rapidly. At this point programming is complete and your device should operate when the HomeLink button is pressed and released.

Information
Some garage door openers require you to press the programmed button on the mirror up to three times right after the programming is just completed to operate the garage door. The indicator (4) is turned ON in Orange and flashes for about 60 seconds, during the programming mode and if programming does not succeed within the 60 seconds, the programming mode will be aborted. HomeLink® should now activate your rolling code-equipped device.

Gate operator & Canadian programming
During programming, your handheld transmitter may automatically stop transmitting. Continue to press the Integrated HomeLink® Wireless Control System button while you press and re-press (“cycle”) your handheld transmitter every two seconds until the frequency signal has been learned. The indicator light will flash slowly and then rapidly after several seconds upon successful training.

Operating HomeLink®

1.  Press and release one of the HomeLink buttons (1, 2 or 3) that programed.
2. The HomeLink indicator (4) will operate as below:
   • Indicates Green and is continuously ON (Fixed Code Garage Door Opener)
   • Flashes in Green rapidly (Rolling Code Garage Door Opener)

Erasing HomeLink® buttons

1. Press and hold the button (1) and (3) simultaneously.
2. The indicator (4) is turned continuously ON in orange for about 10 seconds.
3. Then the indicator (4) color changes to Green and flashes rapidly. Release the buttons once the green indicator flashes.
4. Now HomeLink buttons (1), (2), and (4) memories are all cleared. NVS® is a registered trademark and Z-Nav™ is a trademark of the Gentex Corporation, Zeeland, Michigan. HomeLink® is a registered trademark owned by Johnson Controls, Incorporated, Milwaukee, Wisconsin.
   1. FCC ID: NZLUAHL5A
   2. IC: 4112A-UAHL5A

Information
This device complies with Part 15 of the FCC Rules.

Operation is subject to the following three conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.
3. The transceiver has been tested and complies with FCC and Industry Canada rules. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the device.

Two-Way Communication Programming

1. Complete the HomeLink “Programing” first.
2. Before the first 10 times the HomeLink button is pressed after the programming, the following steps MUST occur to program two-way communication. (only for some older garage doors)
   
3. Press and release the programmed HomeLink button to activate the garage door.
4. Once the garage door is stopped, press and release the “Learn” or “Smart” button on the Garage door opener within 1 minute from the time of pressing the programmed HomeLink button on the mirror.
   
5. If both indicator (4) and (5) are flashing rapidly for about 5 seconds, the two-way synchronization is completed.

Information
Some newer garage door openers provide two-way communication synchronizing when programming the original transmitter.

Operating Two Way Communication

1. Press and release (1), (2) or (3) button.
   
2. The indicator (4) and (5) operates as below:
   • If indicator (4) flashes in Orange, it indicates that the garage door is “closing”.
   • If indicator (4) is ON continuously in Green, it indicates that the garage door is “closed”.
   • If indicator (5) flashes in Orange, it indicates that the garage door is “Opening”.
   • If indicator (5) is ON continuously in Green, it indicates that the garage door is “Opened”.
   • If the indicator (4) or (5) does not turn to Green, it indicates that the last status of the garage door was not received properly. The HomeLink mirror tries to receive the last known status of the garage door for a few seconds.

Recalling Garage Door Status
Homelink mirror with two-way communication provides a way to view the last stored message from the garage door opener. In order to recall the last known status of the last activated device, press the buttons “1 and 2” OR “2 and 3” simultaneously.

• In green, it indicates that the last activated device was “closed” properly.
• In green, it indicates that the last activated device was “open” properly.

Information
The two-way communication range distance between “vehicle” and “garage door opener” is 100m. The range may be reduced or increased a little due to obstacle conditions around the garage door opener, such as houses or trees.

Side View Mirrors

Make sure to adjust the side view mirrors to your desired position before you begin driving. Your vehicle is equipped with both left-hand and right-hand side view mirrors. The mirrors can be adjusted remotely with the remote switch. The side view mirrors can be folded to help prevent damage when going through an automatic car wash or when passing through a narrow street. The right-side view mirror is convex. Objects seen in the mirror are closer than they appear. Use the inside rearview mirror or look back directly to determine the actual distance of other vehicles prior to changing lanes.

WARNING
Do not adjust or fold the side view mirrors while driving. This may cause loss of vehicle control resulting in an accident.

NOTICE

• Do not scrape ice off the mirror face;  this may damage the surface of the glass. If the mirror is jammed with ice, do not adjust the mirror by force. Use an approved deicer (not radiator antifreeze) spray, or a sponge or soft cloth with very warm water, or move the vehicle to a warm place and allow the ice to melt.

Side View Mirror Adjustment

1. Press either the L (left side) or R (right side) button (1) to select the side view mirror you would like to adjust.
2. Use the mirror adjustment control (2) to position the selected mirror up, down, left, or right.
3. After adjustment, put the button into a neutral (center) position to prevent inadvertent adjustment.

NOTICE

• The mirrors stop moving when they reach the maximum adjusting angles, but the motor continues to operate while the switch is pressed. Do not press the switch longer than necessary, because this can damage the motor. Do not attempt to adjust the side view mirrors by hand, because this can damage the motor.

Folding the side-view mirrors

To fold the side view mirrors, grasp the housing of the mirror and then fold it inwards.

WINDOWS

1. Driver’s door power window switch
2. Front passenger’s door power window switch
3. Rear door (left) power window switch
4. Rear door (right) power window switch
5. Window opening and closing
6. Automatic power window
7. Power window lock switch

Power Windows

The ignition switch must be in the ON position to be able to raise or lower the windows. Each door has a Power Window switch to control that door’s window. The driver has a Power Window Lock switch which can block the operation of rear passenger windows. The power windows will operate for approximately 30 seconds after the ignition switch is placed in the ACC or LOCK/OFF position. However, if the front doors are opened, the Power Windows will not operate even within the 30-second period.

WARNING
To avoid serious injury or death, do not extend your head, arms, or body outside the windows while driving.

Information

• In cold and wet climates, power windows may not work properly due to freezing conditions. While driving with the rear windows down or with the sunroof (if equipped) opened (or partially opened), your vehicle may demonstrate a wind buffeting or pulsation noise. This noise is normal and can be reduced or eliminated by taking the following actions. If the noise occurs with one or both of the rear windows down, partially lower both front windows approximately one inch. If you experience the noise with the sunroof open, slightly close the sunroof.

Window opening and closing

To open:
Press the window switch down to the first detent position (5). Release the switch when you want the window to stop.

To close:
Pull the window switch up to the first detent position (5). Release the window switch when you want the window to stop.

Auto down window (if equipped)
Pressing the power window switch down momentarily to the second detent position (6) completely lowers the window even when the switch is released. To stop the window at the desired position while the window is in operation, pull up or press down and release the switch.

Auto up/down window (if equipped)
Pressing or pulling up the power window switch momentarily to the second detent position (6) completely lowers or lifts the window even when the switch is released. To stop the window at the desired position while the window is in operation, pull up or press down and release the switch.

To reset the power windows
If the power windows do not operate normally, the automatic power window system must be reset as follows:

1. Place the ignition switch in the ON position.
2. Close the window and continue pulling up on the power window switch for at least one second.
3. If the power windows do not operate properly after resetting, have the system checked by an authorized HYUNDAI dealer.

WARNING
The automatic reverse feature doesn’t activate while resetting the power window system. Make sure body parts or other objects are safely out of the way before closing the windows to avoid injuries or vehicle damage.

Automatic reverse (if equipped)

If a window senses any obstacle while it is closing automatically, it will stop and lower approximately 12 inches (30 cm) to allow the object to be cleared. If the window detects the resistance while the power window switch is pulled up continuously, the window will stop upward movement and then lower approximately 1 inch (2.5 cm). If the power window switch is pulled up continuously again within 5 seconds after the window is lowered by the automatic window reverse feature, the automatic window reverse will not operate.

Information
The automatic reverse feature is only active when the “Auto Up” feature is used by fully pulling up the switch to the second detent.

WARNING
Make sure body parts or other objects are safely out of the way before closing the windows to avoid injuries or vehicle damage. Objects less than 0.16 inch (4 mm) in diameter caught between the window glass and the upper window channel may not be detected by the automatic reverse window and the window will not stop and reverse direction.

NOTICE
Do not install any accessories on the windows. The automatic reverse feature may not operate. Power window lock switch Do not install any accessories on the windows. The automatic reverse feature may not operate.

Power window lock switch

The driver can disable the power window switches on the rear passenger doors by pressing the power window lock switch.

When the power window lock switch is pressed:

• The rear passenger control will not be able to operate the rear passenger power window
•  Note that the front passenger control is still able to operate the front passenger window, and that the driver master control can still operate all the power windows.

NOTICE

• To prevent possible damage to the power window system, do not open or close two windows or more at the same time. This will also ensure the longevity of the fuse.
•  Never try to operate the main switch on the driver’s door and the individual door window switch in opposite directions at the same time. If this is done, the window will stop and cannot be opened or closed.

WARNING

• NEVER leave the keys in your vehicle with unsupervised children, when the engine is running.
• NEVER leave any child unattended in the vehicle. Even very young children may inadvertently cause the vehicle to move, entangle themselves in the windows, or otherwise injure themselves or others.
• Always double-check to make sure arms, hands, heads, and other obstructions are safely out of the way before closing a window.
• Do not allow children to play with the power windows. Keep the driver’s door power window lock switch in the LOCK position (pressed). Serious injury can result from unintentional window operation by the child.
• Do not extend your head, arms, or body outside the windows while driving.

Q&A

What kind of steering wheel does the Hyundai Elantra Hybrid 2023 have?
The Hyundai Elantra Hybrid 2023 has a steering wheel that is designed for comfort and control. It also comes with mounted controls for audio, Bluetooth, and cruise control.

Is the steering wheel controls easy to use?
Yes, the mounted controls on the steering wheel are easy to use and provide easy access to the most commonly used functions while driving.

Does the Hyundai Elantra Hybrid 2023 have power mirrors and windows?
Yes, the Hyundai Elantra Hybrid 2023 comes with power mirrors and windows, which can be controlled with the touch of a button.

Can the angle of the mirrors be adjusted remotely?
Yes, the power mirrors of the Elantra Hybrid allow the driver to adjust the angle of the mirrors remotely, without having to physically adjust them.

Are the mirrors equipped with any special features?
Yes, the mirrors of the Elantra Hybrid are equipped with a heating system, which helps to clear frost and fog during cold weather.

Are the windows of the Elantra Hybrid easy to operate?
Yes, the power windows of the Elantra Hybrid provide convenience and comfort by allowing the driver and passengers to roll the windows up or down with ease.

What kind of materials are the windows made of?
The windows of the Elantra Hybrid are made of high-quality materials that resist scratches and chips.

Are the mirrors and windows durable?
Yes, the mirrors and windows of the Elantra Hybrid are designed to be durable and easy to maintain.

What other features does the Elantra Hybrid offer?
The Elantra Hybrid also offers other features such as Bluetooth connectivity, a touchscreen infotainment system, and a suite of advanced safety features.

Is the Elantra Hybrid fuel efficient?
Yes, the Elantra Hybrid is a compact hybrid sedan that is designed to be fuel efficient, with an estimated 50 mpg combined fuel economy rating.

How many people can the Elantra Hybrid seat?
The Elantra Hybrid can seat up to five people, with ample legroom and headroom for both front and rear passengers.

What is the price of the Hyundai Elantra Hybrid 2023?
The price of the Hyundai Elantra Hybrid 2023 varies depending on the trim level and options chosen. It starts at around $24,000.

What is the warranty on the Elantra Hybrid?
The Hyundai Elantra Hybrid 2023 comes with a 5-year/60,000-mile limited warranty and a 10-year/100,000-mile powertrain warranty.

What is the horsepower of the Elantra Hybrid?
The Elantra Hybrid comes with a 1.6-liter 4-cylinder engine that delivers a total of 139 horsepower.

What kind of transmission does the Elantra Hybrid have?
The Elantra Hybrid comes with a 6-speed automatic transmission with a dual-clutch system.

Useful Link

View Full User Guide: Hyundai Elantra Hybrid 2023 User Guide
Download Manuals: https://owners.hyundaiusa.com/us/en/resources/manuals-warranties.html
2023 Hyundai Elantra Specs, Price, Features, Milage (Brochure)