Defrosting System: 2023 Hyundai Hybrid Elantra | Climate Control User Manual
The Hyundai Elantra Hybrid 2023 is a vehicle that pushes the boundaries of automotive innovation with its fuel-efficient design and emphasis on passenger and driver comfort. The cutting-edge temperature management system, which smoothly combines windshield defrosting and defogging capabilities for an unmatched driving experience, is at the core of this commitment.
Beyond conventional climate control systems, the Elantra Hybrid 2023 provides a customized experience for the driver and passengers. To accommodate everyone’s preferred level of comfort, set separate temperature zones. Every trip is enjoyable because of the harmonious mood that is created in the cabin by this painstaking attention to detail.
2023 Hyundai Elantra Specs, Price, Features, Milage (Brochure)
WARNING
Windshield heating
Do not use the or position during cooling operations in extremely humid weather. The difference between the temperature of the outside air and that of the windshield could cause the outer surface of the windshield to fog up, causing loss of visibility. In this case, set the mode selection knob or button to the position and fan speed control knob or button to lower speed.
- For maximum defrost performance, set the temperature control knob to the highest temperature setting (rotated to the right) and the fan speed control to the highest setting.
- If warm air to the floor is desired while defrosting or defogging, set the mode to the floor-defrost position.
- Before driving, clear all snow and ice from the windshield, rear window, side view mirrors, and all side windows.
- Clear all snow and ice from the hood and air inlet in the cowl grill to improve the heater and defroster efficiency and reduce the probability of fogging up inside of the windshield.
Automatic Climate Control System
To defog inside windshield
- Select the desired fan speed.
- Select the desired temperature.
- Press the defroster button ( ).
- The air-conditioning will turn on according to the detected ambient temperature, fresh mode and higher fan speed will be selected automatically.
If the air-conditioning, fresh mode and higher fan speed are not selected automatically, adjust the corresponding button or knob manually.
If the position is selected, the lower fan speed is controlled to a higher fan speed.
To defrost the outside windshield
- Set the fan speed to the highest position.
- Set the temperature to the extremely hot (HI) position.
- Press the defroster button ( ).
- The air-conditioning will turn on according to the detected ambient temperature and fresh mode will be selected automatically.
If the position is selected, the lower fan speed is controlled to a higher fan speed.
Climate Control Features
Sophisticated climate control systems are standard on most cars and are intended to improve your driving experience. These features offer a variety of options to create the ideal interior climate, going beyond simple temperature adjustment. Climate control systems enhance the driving experience by offering enhanced defrosting and air filtration, as well as dual-zone temperature settings for individual comfort. Investigate the several options available to you to make sure your trip is not just seamless but also customized to your tastes.
Defogging Logic
To help reduce the probability of fogging up the inside of the windshield, the air intake or air conditioning is controlled automatically according to a certain position. To cancel or return the defogging logic, do the following
Manual climate control system
- Turn the ignition switch to the ON position.
- Select defroster mode ( ).
- Press the air intake control button at least 5 times within 3 seconds. The process should be completed within 10 seconds after the defroster mode ( ) is selected.
The LED indicator on the air intake button will blink 3 times to indicate that the defogging logic has been disabled.
Repeat the steps to re-enable the defogging logic.
If the battery has been discharged or disconnected, it resets to the defog logic status.
Automatic climate control system
- Turn the ignition switch to the ON position.
- Press the defroster button ( ).
- While pressing the air conditioning button (A/C), press the air intake control button at least 5 times within 3 seconds.
The automatic climate control information screen will blink 3 times to indicate that the defogging logic has been disabled.
Repeat the steps to re-enable the defogging logic.
If the battery connector has been discharged or disconnected, it resets to the defog logic status.
Auto Defogging System
2023 Hyundai Hybrid Elantra Owners Manual
Auto defogging helps reduce the possibility of fogging up the inside of the windshield by automatically sensing the moisture on inside the windshield.
The auto-defogging system operates when the heater or air conditioning is on.
When the Auto Defogging System operates, the indicator will illuminate. If a high amount of humidity is detected in the vehicle, the Auto Defogging System will be enabled.
The following steps will be performed automatically:
- Step 1) The A/C button will turn ON.
- Step 2) The air intake control will change to Fresh mode under low outside temperatures.
- Step 3) The mode will be changed to defrost to direct airflow to the windshield.
- Step 4) The fan speed will be increased.
To cancel or reset the Auto Defogging System
Press the front windshield defroster button for 3 seconds when the ignition switch is in the ON position.
When the Auto Defogging System is cancelled, the defrost button indicator will blink 3 times.
When the Auto Defogging System is reset, the defrost button indicator will blink 6 times without a signal.
Information
- When the air conditioning is turned on by an auto-defogging system, if you try to turn off the air conditioning, the indicator will blink 3 times and the air conditioning will not be turned off.
- To maintain the effectiveness and efficiency of the Auto Defogging System, do not select Recirculation mode while the system is operating.
- When the Auto Defogging System is operating, the fan speed adjustment knob, the temperature adjustment knob, and the air intake control button are all disabled.
NOTICE
Do not remove the sensor cover located on the upper end of the driver-side windshield glass. Damage to system parts could occur and may not be covered by your vehicle warranty.
Hybrid Elantra defroster
2023 Hyundai Hybrid Elantra User Manual
NOTICE
To prevent damage to the conductors bonded to the inside surface of the rear window, never use sharp instruments or window cleaners containing abrasives to clean the window.
Information
If you want to defrost and defog the front windshield, refer to “Windshield Defrosting and Defogging” in this chapter.
Rear window defroster
The defroster heats the window to remove frost, fog and thin ice from the interior and exterior of the rear window, while the engine is running.
- To activate the rear window defroster, press the rear window defroster button located in the centre facia switch panel. The indicator on the rear window defroster button illuminates when the defroster is ON.
- To turn off the defroster, press the rear window defroster button again.
2023 Hyundai Elantra User Guide
Information
- If there is a heavy accumulation of snow on the rear window, brush it off before operating the rear defroster.
- The rear window defroster automatically turns off after approximately 20 minutes or when the ignition switch is in the LOCK/OFF position.
Outside mirror defroster (if equipped)
If your vehicle is equipped with the outside mirror defrosters, they will operate at the same time you turn on the rear window defroster.
Car Defrosting Tips
For a clear and safe driving experience throughout the winter, defrosting your automobile is a must. You can effectively deal with frost and ice with a few basic tips, guaranteeing maximum visibility and a stress-free start to your day. These suggestions, which range from utilizing the defrost setting on your car to carefully shovelling snow, will have you driving with a clear windshield in no time.
Sunroof Inside Air Recirculation (if equipped)
When the sunroof is opened, outside
(fresh) air will be automatically selected. At this time, if you press the air intake control button, the recirculated air position will be selected but will change back to outside (fresh) air after 3 minutes. When the sunroof is closed, the air intake position will return to the original position that was selected.
Auto Comfort Control (for driver’s seat) (if equipped)
The temperature of the driver’s seat warmer, air ventilation seat and
heated steering wheel is automatically controlled depending on the inside and outside temperature of the vehicle when the engine is running.
To use this function, it must be activated from the Settings menu on the Infotainment System screen. Select:
- Ventilated Features
For more details on Auto Comfort Control, refer to “Seat warmers and air ventilation seat” in Chapter 3, and “Heated steering wheel” in Chapter 5
Automatic Ventilation (if equipped)
The system automatically selects the fresh mode when the climate control system operates over a certain period (approximately 30 minutes) in low temperatures with the recirculation mode selected.
To cancel or reactivate the Automatic Ventilation
When the air conditioning system is on, select Face Level mode and press the air recirculation mode button at least 5 times within 3 seconds while pressing the A/C button.
When the automatic ventilation is cancelled, the indicator blinks 3 times. When the automatic ventilation is activated, the indicator blinks 6 times.
FAQ’s
The defroster system in the 2023 Hyundai Hybrid Elantra uses warm air directed at the windshield to quickly melt ice or frost, ensuring clear visibility.
The defroster system can be activated manually by the driver to ensure flexibility, but it also has an automatic mode that engages when necessary.
Yes, the 2023 Hyundai Hybrid Elantra’s defroster system works on both the front windshield and, if equipped, the rear window to maximize visibility.
The auto-defogging system is designed to prevent condensation on the interior surfaces, such as windows, by adjusting the climate control settings automatically.
The auto-defogging system utilizes sensors to detect humidity levels inside the vehicle, automatically engaging when needed to prevent interior fogging.
Yes, drivers can choose to control the auto-defogging system manually, providing a personalized approach to climate control.
Yes, the auto-defogging system is designed to be effective in various weather conditions, ensuring clear visibility regardless of external factors.
The auto-defogging system adapts to changing conditions automatically, but drivers can customize certain settings to align with their comfort preferences.
Yes, both systems can be used simultaneously for comprehensive climate control, effectively addressing both exterior frost and interior condensation.
Yes, the vehicle may have a timed defrost feature, allowing you to preset the duration for which the defroster operates.
The impact on fuel efficiency is minimal, as the auto-defogging system is designed to operate efficiently without significantly affecting overall consumption.
The defroster system in the 2023 Hyundai Hybrid Elantra is designed for rapid action, effectively melting ice or frost within a few minutes of activation.
Yes, the temperature of the defroster system can be manually adjusted to suit your preferences and external conditions.
Yes, in addition to the defroster and auto-defogging system, the Hyundai Hybrid Elantra may offer features like dual-zone climate control and air purification for an elevated driving experience.
Useful Links
View Full User Guide: Hyundai Elantra Hybrid 2023 User GuideDownload Manuals: https://owners.hyundaiusa.com/us/en/resources/manuals-warranties.html
2023 Hyundai Elantra Battery And Tires Guidelines
2023 Hyundai Elantra Specs, Price, Features, Milage (Brochure)