Fixing a blown fuse: 2021 Hyundai Accent Fuse Diagram Guide
The 2021 Hyundai Accent is equipped with an advanced electrical system that is protected by a carefully crafted fuse box and a variety of fuses, which are essential parts that act as the protectors of the car’s electrical systems. The fuse box is located strategically inside the car and contains fuses with different amperage ratings, each of which is intended to safeguard particular circuits against overloads or malfunctions. Maintaining continuous operation requires knowing how to operate the fuse box and repair blown fuses, as these can cause electrical problems that impact essential systems like power windows, lighting, and more. The purpose of this tutorial is to explain the complex fuses and fuse box of the Hyundai Accent 2021 so that owners may repair and inspect fuses with confidence and ensure a dependable and effective electrical system to improve driving quality.
2023 Hyundai Sonata Specs, Price, Features, Milage (Brochure)
FUSES
A vehicle’s electrical system is protected from electrical overload damage by fuses. This vehicle has 2 (or 3) fuse panels,one located in the driver’s side panel bolster, the other in the engine compartment near the battery. If any of your vehicle’s lights, accessories, or controls do not work, check the appropriate circuit fuse. If a fuse has blown, the element inside the fuse will be melted or broken. If the electrical system does not work, first check the driver’s side fuse panel. Before replacing a blown fuse, turn the engine and all switches off, and then disconnect the negative battery cable. Always replace a blown fuse with one of the same rating. If the replacement fuse blows, this indicates an electrical problem. Avoid using the system involved and immediately consult an authorized HYUNDAI dealer.
WARNING
NEVER replace a fuse with anything but another fuse of the same rating.
- A higher capacity fuse could cause damage and possibly cause a fire.
- Do not install a wire or aluminum foil instead of the proper fuse – even as a temporary repair. It may cause extensive wiring damage and possibly a fire.
NOTICE
Do not use a screwdriver or any other metal object to remove fuses because it may cause a short circuit and damage the system.
Instrument Panel Fuse Replacement
Power connector
If your vehicle is to be parked for more than a month you need to do as follows previously in order to prevent battery discharge.
- Turn off the engine.
- Turn off the headlamps and taillamps.
- Open the inner fuse panel cover and pull out the power connector.
Inner panel fuse replacement
- Turn the engine off.
- Turn all other switches OFF.
- Open the fuse panel cover.
- Refer to the label on the inside of the fuse panel cover to locate the suspected fuse location.
- Pull the suspected fuse straight out. Use the removal tool provided in the engine compartment fuse panel.
- Check the removed fuse; replace it if it is blown. Spare fuses are provided in the instrument panel fuse panels (or in the engine compartment fuse panel).
- Push in a new fuse of the same rating, and make sure it fits tightly in the clips. If it fits loosely, consult an authorized HYUNDAI dealer.
Information
If you do not have a spare, use a fuse of the same rating from a circuit you may not need for operating the vehicle, such as the cigar lighter fuse. If the headlights or other electrical components do not work and the fuses are OK, check the fuse block in the engine compartment. If a fuse is blown, it must be replaced with the same rating. In an emergency, if you do not have a spare fuse, use a fuse of the same rating from a circuit you may not need for operating the vehicle. If the headlamps or other electrical components do not work and the fuses are undamaged, check the fuse panel in the engine compartment. If a fuse is blown, it must be replaced with the same rating.
Engine Compartment Panel Fuse Replacement
-
Turn the engine off
-
Turn all other switches OFF.
-
Remove the fuse panel cover by pressing the tap and pulling up.
-
Check the removed fuse; replace it if it is blown. To remove or insertthe fuse, use the fuse puller in the engine compartment fuse panel.
-
Push in a new fuse of the same rating, and make sure it fits tightly in the clips. If it fits loosely, consult an authorized HYUNDAI dealer.
CAUTION
After checking the fuse box in the engine compartment securely close the fuse box cover inside the engine compartment, until it clicks. If the fuse box is not closed properly, water may leak in side, possibly causing a malfunction with the electrical system.
Main fuse
If the main fuse is blown, it must be removed as follows:
- Turn off the engine.
- Disconnect the negative battery cable.
- Remove the fuse panel cover by pressing the tab and pulling it up.
- Remove the nuts shown in the picture above.
- Replace the fuse with a new one of the same rating.
- Reinstall in the reverse order of removal.
Information
If the main fuse is blown, consult an authorized HYUNDAI dealer
Multi fuse
If the multi fuse is blown, it must be removed as follows:
- Turn off the engine.
- Disconnect the negative battery cable.
- Remove the fuse panel cover by pressing the tab and pulling it up.
- Remove the nuts shown in the picture above.
- Replace the fuse with a new one of the same rating.
- Reinstall in the reverse order of removal.
Information
If the multi fuse is blown, consult an authorized HYUNDAI dealer.
Fuse/Relay Panel Description
Instrument panel fuse panel
Inside the fuse/relay box cover, you can find the fuse/relay label describing fuse/relay names and ratings. Information
Not all fuse panel descriptions in this manual may be applicable to your vehicle; the information is accurate at the time of printing. When you inspect the fuse box on your vehicle, refer to the fuse box label.
Fuse Name | Fuse Rating | Circuit Protected |
DOOR LOCK | 20A | I/P Junction Block (Tail Gate Unlock Relay, Door Lock/Unlock Relay, Two Turn Unlock Relay) |
POWER OUTLET | 20A | Power Outlet |
SAFETY P/WINDOW | 25A | Driver Safety Power Window Module |
STOP LAMP | 15A | I/P Junction Block(Stop Signal Electronic Module) |
T/SIGNAL LAMP | 15A | BCM, SLM |
C/LIGHTER | 20A | Cigarette Lighter |
HEATED MIRROR | 10A | Driver Power Outside Mirror, Passenger Power Outside Mirror, A/C Control Module |
DRL | 10A | BCM |
P/WINDOW RH | 25A | Power Window Main Switch, Passenger Power Window Switch |
S/HEATER | 20A | Front Seat Warmer Control Module |
SPARE1 | 10A | – |
START |
7.5A |
With Smart Key : ECM/PCM, E/R Junction Block(Start Relay), Smart Key Control Module, Transaxle Range Switch, Ignition Lock & Clutch Switch
W/O Smart Key : Burglar Alarm Relay, Transaxle Range Switch, Ignition Lock & Clutch Switch |
Fuse Name | Fuse Rating | Circuit Protected |
TAIL LAMP RH | 7.5A | Head Lamp RH, Rear Combination Lamp (OUT) RH, License Lamp RH, Rear Combination Lamp (IN) RH, ILL (+) |
MODULE2 | 10A | FCA Module, Crash Pad Switch |
TCU | 15A | E/R Junction Block(Fuse – B/UP LAMP), A/T Shift Lever, Transaxle Range Switch, Stop Lamp Switch |
P/WINDOW LH | 25A | Power Window Main Switch |
SPARE2 | 25A | Spare |
FOG LAMP REAR | 10A | – |
HEATED STEERING | 15A | Clock Spring |
TAIL LAMP LH | 7.5A | Head Lamp LH, License Lamp LH, Rear Combination Lamp (OUT) LH, Rear Combination Lamp (IN) LH |
MODULE3 | 7.5A | Front Seat Warmer Control Module, Audio, Electro Chromic Mirror, A/C Control Module, Clock Spring, A/T Shift Lever Indicator |
ABS3 | 7.5A | E/R Junction Block(Multipurpose Check Connector), ESC Module |
BRAKE SWITCH | 10A | Smart Key Control Module, Stop Lamp Switch |
BCM | 10A | BCM |
Fuse Name | Fuse Rating | Circuit Protected |
FOG LAMP FRONT | 15A | I/P Junction Block(Front Fog Lamp Relay) |
A/C1 | 7.5A | E/R Junction Block(Blower Relay), A/C Control Module |
MODULE5 | 10A | Sunroof Motor, Front Seat Warmer Control Module |
MODULE7 | 10A | TPMS Unit |
ECU | 10A | ECM/PCM, Immobilizer Module, Smart Key Control Module |
SUNROOF | 15A | Sunroof Motor |
IMMO. | 10A | Immobilizer Module |
MODULE6 | 10A | Key Solenoid |
SPARE4 | 10A | Spare |
MODULE4 | 7.5A | SLM, BCM, Smart Key Control Module |
SPARE5 | 10A | Spare |
AIR BAG | 10A | SRS Control Module, Occupant Detection Sensor |
Fuse Name | Fuse Rating | Circuit Protected |
MODULE1 | 7.5A | BCM, SLM, Key Interlock |
SMART KEY | 25A | Smart Key Control Module |
A/C2 | 7.5A | – |
WIPER RR | 15A | Multifunction Switch, Rear Wiper Motor, Rear Wiper Relay |
WIPER FRT | 25A | Multifunction Switch, Front Wiper Motor, E/R Junction Block(Wiper Lo Relay) |
ACC | 10A | I/P Junction Block(Power Outlet Relay), BCM, SLM, Audio,
Key Interlock Power Outside Mirror Switch, Smart Key Control Module, USB Charging Connecto |
SPARE3 | 20A | Spare |
A/BAG IND | 7.5A | Instrument Cluster, A/C Control Module |
CLUSTER | 7.5A | Instrument Cluster |
MDPS2 | 7.5A | MDPS Unit |
AUDIO | 20A | Audio |
ROOM LP |
10A |
I/P Junction Block(Room Lamp Relay), Overhead Console Lamp , A/C Control Module, SLM, BCM, Auto Light & Photo Sensor, TPMS Unit ,Instrument Cluster, Data Link Connector, Room Lamp, Trunk Room Lamp, Electro Chromic Mirror |
Engine compartment fuse panel
Inside the fuse/relay box cover, you can find the fuse/relay label describing fuse/relay names and ratings.
Information
Not all fuse panel descriptions in this manual may be applicable to your vehicle; the information is accurate at the time of printing. When you inspect the fuse panel in your vehicle, refer to the fuse panel label.
Type | Relay NO. | Relay Name |
MICRO |
AC | A/C Relay |
E81 | Start Relay | |
E82 | Blower Relay | |
E83 | Fuel Pump Relay | |
E84 | Cooling Fan1 Relay | |
E85 | Wiper HI Relay | |
E86 | Wiper LO Relay | |
E87 | H/Lamp HI Relay | |
E88 | Head Lamp Relay | |
E89 | Cooling Fan2 Relay | |
E90 | Horn Relay | |
E91 | B/Alarm Horn Relay | |
MINI | E93 | Horn Relay |
Fuse Name | Fuse Rating | Circuit Protected |
MDPS | 80A | MDPS Unit |
ALT | 150A | E/R Junction Block (Fuse – ABS1, ABS2, BLOWER, REAR HEATED) |
REAR HEATED | 40A | I/P Junction Block (Rear Defogger Relay) |
ABS1 | 40A | ESC Module, Multipurpose Check Connector |
ABS2 | 40A | ESC Module |
BLOWER | 40A | E/R Junction Block (Blower Relay) |
WIPER | 10A | Front Wiper Motor, Multifunction Switch, E/R Junction Block (Wiper LO Relay) |
ECU4 | 15A | ECM/PCM |
SENSOR1 |
10A |
Oil Control Valve #1/#2, E/R Junction Block (Cooling Fan1/2 Relay),
Oxygen Sensor (Up), Oxygen Sensor (Down), Variable Intake Solenoid Valve, Sub Relay Block (A/C Relay) Purge Control Solenoid Valve, Canister Close Valve |
ECU2 | 15A | ECM/PCM |
ECU3 | 20A | ECM/PCM |
HEAD LAMP RH | 10A | Head Lamp RH |
Fuse Name | Fuse Rating | Circuit Protected |
HEAD LAMP LH | 10A | Head Lamp LH |
IGN COIL | 20A | Ignition Coil #1~#4, Condenser |
ECU5 | 15A | ECM/PCM, E/R Junction Block (Fuel Pump Relay) |
B/UP LAMP | 10A | Reverse lamp switch |
B+1 | 40A | I/P Junction Block (Fuse – DRL, FOGLAMP FRONT,
STOP LAMP, MODULE6, Power Connector (AUDIO, ROOM LAMP)) |
B+2 | 50A | I/P Junction Block (Fuse – IMMO, SMART KEY1, BRAKE SWITCH,
BCM, SAFETY P/WINDOW, S/HEATER, SUNROOF, Power Window Relay) |
IG2 | 40A | Ignition Switch, PDM Relay Box (IG2 Relay), E/R Junction Block (Start Relay) |
COOLING FAN | 40A | E/R Junction Block (Cooling Fan1/2 Relay) |
ECU1 | 30A | E/R Junction Block (Fuse – ECU3, ECU4, Main Relay) |
B/ALARM HORN | 10A | B/Alarm Horn Relay |
HEAD LAMP | 20A | E/R Junction Block (Head Lamp Relay) |
H/LAMP HI | 20A | W/O DRL : E/R Junction Block (H/Lamp HI Relay) With DRL : SLM, BCM |
Fuse Name | Fuse Rating | Circuit Protected |
HEAD LAMP LH | 10A | Head Lamp LH |
IGN COIL | 20A | Ignition Coil #1~#4, Condenser |
ECU5 | 15A | ECM/PCM, E/R Junction Block (Fuel Pump Relay) |
B/UP LAMP | 10A | Reverse lamp switch |
B+1 | 40A | I/P Junction Block (Fuse – DRL, FOGLAMP FRONT,
STOP LAMP, MODULE6, Power Connector (AUDIO, ROOM LAMP)) |
B+2 | 50A | I/P Junction Block (Fuse – IMMO, SMART KEY1, BRAKE SWITCH,
BCM, SAFETY P/WINDOW, S/HEATER, SUNROOF, Power Window Relay) |
IG2 | 40A | Ignition Switch, PDM Relay Box (IG2 Relay), E/R Junction Block (Start Relay) |
COOLING FAN | 40A | E/R Junction Block (Cooling Fan1/2 Relay) |
ECU1 | 30A | E/R Junction Block (Fuse – ECU3, ECU4, Main Relay) |
B/ALARM HORN | 10A | B/Alarm Horn Relay |
HEAD LAMP | 20A | E/R Junction Block (Head Lamp Relay) |
H/LAMP HI | 20A | W/O DRL : E/R Junction Block (H/Lamp HI Relay) With DRL : SLM, BCM |
Engine compartment fuse panel (Battery terminal cover)
Inside the fuse/relay box cover, you can find the fuse/relay label describing fuse/relay names and ratings.
Information
Not all fuse panel descriptions in this manual may be applicable to your vehicle; the information is accurate at the time of printing. When you inspect the fuse panel in your vehicle, refer to the fuse panel label.
NOTICE
After checking the fuse panel in the engine compartment, securely
install the cover. If it is not securely latched, electrical failure may occur from water contact.
FAQs
The fuse box houses fuses, which protect various electrical components by breaking the circuit in case of an overload or fault.
Look for a fuse with a broken filament or use a fuse tester to identify a blown fuse.
Basic tools include a fuse puller or pliers and replacement fuses with the correct amperage.
Replacing a blown fuse is a relatively simple task and can be done following the instructions in the vehicle’s manual; however, if unsure, consulting a professional is recommended.
Regularly inspect fuses, especially if you encounter electrical issues, and replace them as needed.
Yes, Hyundai Accent typically comes with spare fuses, and their locations are often indicated in the fuse box cover or manual.
Yes, a blown fuse can affect different electrical components, so it’s crucial to address the issue promptly.
The amperage rating is usually printed on the fuse or can be found in the vehicle’s manual.
It is not recommended to use a fuse with a higher amperage rating, as it may compromise the safety of the vehicle’s electrical system.
Yes, the Hyundai Accent may use various types of fuses, including blade-type fuses and cartridge fuses.
Yes, extreme temperatures can affect fuse performance, so it’s crucial to ensure they are in good condition.
Consult the vehicle’s manual for the correct procedure; generally, it involves identifying the blown fuse, removing it, and inserting a new one.
While a blown fuse is often a result of overloading, persistent issues may indicate an underlying electrical problem that requires professional attention.
Before replacing fuses, turn off the vehicle, disconnect the battery, and follow safety guidelines outlined in the manual to avoid electrical hazards.
Useful Link
View Full PDF: 2021 Hyundai Accent Owners Manual
2023 Hyundai Sonata Specs, Price, Features, Milage (Brochure)