Fixing a Blown Fuse: 2022 Hyundai Veloster Fuse Diagrams
When your car’s electrical problems happen, like a blown fuse, you need to be able to see the fuse pictures to figure out what’s wrong. Figuring out how the 2022 Hyundai Veloster’s fuses are set up can help you quickly find the broken fuse that needs to be changed. Usually, these models show where each fuse is located and what it does, which makes it easier to figure out what’s wrong and fix it. You can quickly fix electrical problems and get back on the road safely by using fuse diagrams that are specific to your car type, like the 2022 Hyundai Veloster.
2023 – 2024 Hyundai Tucson Review, Specs, Price And Mileage (Brochure)
FUSES![2022 Hyundai Veloster-Fixing a Blown Fuse-Fuse Diagrams-fig 1](https://www.autouserguide.com/wp-content/uploads/2024/03/2022-Hyundai-Veloster-Fixing-a-Blown-Fuse-Fuse-Diagrams-fig-1.png)
A vehicle’s electrical system is protected from electrical overload damage by fuses.
This vehicle has 2 (or 3) fuse panels, one located in the driver’s side panel bolster, and the other in the engine compartment near the battery. If any of your vehicle’s lights, accessories, or controls do not work, check the appropriate circuit fuse. If a fuse has blown, the element inside the fuse will be melted or broken.
If the electrical system does not work, first check the driver’s side fuse panel. Before replacing a blown fuse, turn the engine and all switches off, and then disconnect the negative battery cable. Always replace a blown fuse with one of the same rating.
If the replacement fuse blows, this indicates an electrical problem. Avoid using the system involved and immediately consult an authorized HYUNDAI dealer.
WARNING
NEVER replace a fuse with anything but another fuse of the same rating.
- A higher capacity fuse could cause damage and possibly cause a fire.
- Do not install a wire or aluminum foil instead of the proper fuse – even as a temporary repair. It may cause extensive wiring damage and possibly a fire.
NOTICE
Do not use a screwdriver or any other metal object to remove fuses because it may cause a short circuit and damage the system.
Instrument Panel Fuse Replacement![2022 Hyundai Veloster-Fixing a Blown Fuse-Fuse Diagrams-fig 2](https://www.autouserguide.com/wp-content/uploads/2024/03/2022-Hyundai-Veloster-Fixing-a-Blown-Fuse-Fuse-Diagrams-fig-2.png)
- Turn the engine off.
- Turn all other switches OFF.
- Open the fuse panel cover.
- Refer to the label on the inside of the fuse panel cover to locate the suspected fuse location.
- Pull the suspected fuse straight out. Use the removal tool provided in the engine compartment fuse panel.
- Check the removed fuse; replace it if it is blown. Spare fuses are provided in the instrument panel fuse panels (or in the engine compartment fuse panel).
- Push in a new fuse of the same rating, and make sure it fits tightly in the clips. If it fits loosely, consult an authorized HYUNDAI dealer.
In an emergency, if you do not have a spare fuse, use a fuse of the same rating from a circuit you may not need for operating the vehicle.
If the headlamps or other electrical components do not work and the fuses are undamaged, check the fuse panel in the engine compartment. If a fuse is blown, it must be replaced with the same rating.
Fuse switch
Always, place the fuse switch in the ON position. If you move the switch to the OFF position, some items such as the audio system and digital clock must be reset and the smart key may not work properly.
Information
If the fuse switch is OFF, the above message will appear.
NOTICE
- Always place the fuse switch in the ON position while driving the vehicle.
- Do not move the fuse switch repeatedly. The fuse switch may be damaged.
Engine Compartment Panel Fuse Replacement
- Turn the engine off.
- Turn all other switches OFF.
- Remove the fuse panel cover by pressing the tab and pulling it up.
- Check the removed fuse; replace it if it is blown. To remove or insert the fuse, use the fuse puller in the engine compartment fuse panel.
- Push in a new fuse of the same rating, and make sure it fits tightly in the clips. If it fits loosely, consult an authorized HYUNDAI dealer.
CAUTION
After checking the fuse box in the engine compartment secure-ly close the fuse box cover inside the engine compartment, until it clicks.
If the fuse box is not closed properly, water may leak inside, possibly causing a malfunction with the electrical system.
Main fuse
If the main fuse is blown, it must be removed as follows:
- Turn off the engine.
- Disconnect the negative battery cable.
- Remove the fuse panel cover by pressing the tab and pulling it up.
- Remove the nuts shown in the picture above.
- Replace the fuse with a new one of the same rating.
- Reinstall in the reverse order of removal.
Information
If the main fuse is blown, consult an authorized HYUNDAI dealer.
Multi fuse
If the multi fuse is blown, it must be removed as follows:
- Turn off the engine.
- Disconnect the negative battery cable.
- Remove the fuse panel cover by pressing the tab and pulling it up.
- Remove the nuts shown in the picture above.
- Replace the fuse with a new one of the same rating.
- Reinstall in the reverse order of removal.
Information
If the multi fuse is blown, consult an authorized HYUNDAI dealer.
Fuse/Relay Panel Description
Instrument panel fuse panel
Inside the fuse/relay box cover, you can find the fuse/relay label describing fuse/relay names and ratings.
Information
Not all fuse panel descriptions in this manual may apply to your vehicle; the information is accurate at the time of printing. When you inspect the fuse box on your vehicle, refer to the fuse box label.
Instrument panel fuse panel
Fuse Name | Fuse Rating | Protected Component |
MODULE5 | 7.5A | Crash Pad Switch, Electro Chromic Mirror, Audio, A/C Control Module, Front Seat Warmer Module |
MODULE3 | 7.5A | BCM |
TAILGATE OPEN | 10A | T/Gate Relay |
P/WINDOW LH | 25A | Driver Safety Power Window Module |
MULTIMEDIA | 15A | Audio, Keyboard |
P/WINDOW RH | 25A | Power Window RH Relay |
P/SEAT (DRV) | 25A | Driver Seat Manual Switch |
MODULE4 | 7.5A | ECS Unit, LSD Unit, Steering Angle Sensor, Stop Lamp Switch, Active Exhaust Valve, BCM |
PDM2 | 7.5A | Smart Key Control Module |
INTERIOR LAMP | 7.5A | Overhead Console Lamp, Center Room Lamp, Luggage Lamp, Vanity Lamp LH/RH |
MEMORY | 10A | Instrument Cluster, A/C Control Module |
AMP | 30A | AMP |
Fuse Name | Fuse Rating | Protected Component |
SUNROOF1 | 20A | Sunroof |
SUNROOF2 | 20A | Sunroof |
MODULE6 | 7.5A | BCM, Smart Key Control Module |
MDPS | 7.5A | MDPS Unit |
MODULE1 | 7.5A | Data Link Connector, BCM, Hazard Switch |
MODULE7 | 7.5A | Front Seat Warmer Module, ESG Unit, Cooling Fan Control Module |
A/BAG IND | 7.5A | Instrument Cluster, Hazard Switch |
ECS | 15A | ECS Unit |
START | 7.5A | ECM, Smart Key Control Module, E/R Junction Block (Start #1 Relay) |
CLUSTER | 7.5A | Instrument Cluster |
DOOR LOCK | 20A | Door Lock/Unlock Relay, ICM Relay Box (T/Turn Unlock & D/Lock Relay) |
PDM3 | 7.5A | Start Stop Button Switch |
Fuse Name | Fuse Rating | Protected Component |
BRAKE SWITCH | 7.5A | Stop Lamp Switch, Smart Key Control Module |
S/HEATER | 20A | Front Seat Warmer Module |
A/C1 | 7.5A | A/C Control Module, E/R Junction Block (Blower Relay) |
PDM1 | 15A | Smart Key Control Module |
AIR BAG | 15A | Passenger Occupant Detection Sensor, SRS Control Module |
IG1 | 25A | PCB Block (Fuse – ESC3, ECU3, VACUUM PUMP2) |
MODULE2 | 10A | Keyboard, USB Charge, Audio, BCM, Smart Key Control Module |
WASHER | 15A | Multifunction Switch |
WIPER (LO/HI) | 10A | BCM, ECM, Front Wiper Motor, PCB Block (Front Wiper (Low) Relay) |
Fuse Name | Fuse Rating | Protected Component |
WIPER RR | 15A | Rear Wiper Relay, Rear Wiper Motor |
WIPER FRT | 25A | Front Wiper Motor, PCB Block (Front Wiper (Low) Relay) |
HEATED MIRROR | 10A | Driver/Passenger Power Outside Mirror, A/C Control Module |
POWER OUTLET | 20A | Front Power Outlet |
HEATED STEERING | 15A | BCM |
E-LSD | 20A | LSD Unit |
2023 – 2024 Hyundai Tucson Review, Specs, Price And Mileage (Brochure)
Engine compartment fuse panel
Inside the fuse/relay box cover, you can find the fuse/relay label describing fuse/relay names and ratings.
Information
Not all fuse panel descriptions in this manual may apply to your vehicle; the information is accurate at the time of printing. When you inspect the fuse panel in your vehicle, refer to the fuse panel label.
Engine compartment fuse panel
Fuse Name | Fuse Rating | Protected Component | |
ALT | 180A | Alternator, E/R Junction Block (Fuse – MDPS, ESC1, ESC2, B/ALARM HORN) | |
MDPS | 100A | MDPS Unit | |
B+5 | 60A | PCB Block (Engine Control Relay, Fuse – ECU2, HORN, A/C) | |
B+2 | 60A | IGPM (IPS0/IPS1/IPS2, Fuse – S/HEATER) | |
B+3 |
M/T | 60A |
IGPM (IPS3/IPS4/IPS5/IPS6) |
DCT | 50A | ||
B+4 | 50A | IGPM (Fuse – ECS, AMP, P/WINDOW LH, P/WINDOW RH, TAILGATE OPEN, E-LSD, P/SEAT (DRV)) | |
REAR HEATED | 40A | Rear Heated Relay | |
BLOWER | 40A | Blower Relay | |
IG1 | 40A | E/R Junction Block (PDM #2 (ACC) Relay, PDM #3 (IG1) Relay) | |
IG2 | 40A | Start1 Relay, E/R Junction Block (PDM #4 (IG2) Relay) | |
COOLING FAN | 80A | Cooling Fan Control Module |
Fuse Name | Fuse Rating | Protected Component |
E-CVVT3 | 40A | E-CVVT Relay |
FUEL PUMP | 20A | Fuel Pump Relay |
VACUUM PUMP1 | 20A | Electronic Vacuum Pump |
B+1 | 40A | IGPM (Fuse – BRAKE SWITCH, PDM1, PDM3, MODULE1, DOOR LOCK, Leak Current Autocut Device |
B/ALARM HORN | 15A | B/Alarm Horn Relay |
ESC1 | 40A | ESC Control Module, Multipurpose Check Connector |
ESC2 | 30A | ESC Control Module |
E-CVVT1 | 20A | ECM |
E-CVVT2 | 20A | ECM |
Fuse Name | Fuse Rating | Protected Component | |
ECU3 | 10A | ECM | |
VACUUM PUMP2 | 15A | Electronic Vacuum Pump, Vacuum Switch | |
ESC3 | 10A | ESC Control Module, Multipurpose Check Connector | |
EWP |
DCT2 | 60A (TCU B+) |
Electric Water Pump |
DCT3 | 15A (TCU IG1) | ||
SENSOR3 | 10A | Clutch Pedal Position Sensor, E/R Junction Block (Fuel Pump Relay) | |
ECU2 | 15A | ECM | |
HORN | 15A | Horn Relay | |
SENSOR2 | 10A | Canister Close Valve, Purge Control Solenoid Valve, Oil Control Valve, Recirculation Valve Control Solenoid Valve, PCB Block (A/Con Comp Relay) | |
ECU1 | 20A | ECM | |
SENSOR1 | 15A | Oxygen Sensor (Up/Down) | |
IGN COIL | 20A | Ignition Coil #1/#2/#3/#4 | |
A/C | 10A | A/Con Comp Relay |
Engine compartment fuse panel (Battery terminal cover)
(if equipped)
Inside the fuse/relay box cover, you can find the fuse/relay label describing fuse/relay names and ratings.
Information
Not all fuse panel descriptions in this manual may apply to your vehicle; the information is accurate at the time of printing. When you inspect the fuse panel in your vehicle, refer to the fuse panel label.
NOTICE
After checking the fuse panel in the engine compartment, securely install the cover. If it is not securely latched, electrical failure may occur from water contact.
How to replace the Fuse of the 2022 Hyundai Veloster
Replacing the fuse in a 2022 Hyundai Veloster is a relatively straightforward process. Here are the general steps you can follow:
Materials:
- The new fuse of the correct amperage.
- Fuse puller or needle-nose pliers.
Instructions:
- Locate the fuse box: The fuse box in the Hyundai Veloster is typically located either under the dashboard on the driver’s side or in the engine compartment.
- Identify the blown fuse: Use the fuse diagram on the fuse box cover to locate the fuse that corresponds to the system that’s not functioning.
- Turn off the vehicle: Before you start replacing the fuse, make sure the vehicle is turned off and the ignition key is removed.
- Remove the blown fuse: Using a fuse puller or a pair of needle-nose pliers, carefully pull the blown fuse straight out of its socket. Be gentle to avoid damaging the fuse socket.
- Replace the fuse: Insert a new fuse of the same rating into the empty socket. Make sure the new fuse is rated for the same amperage as the old one. Push it in until it’s fully seated.
- Check the replacement: Once you’ve replaced the fuse, visually inspect it to ensure it’s seated properly and there are no signs of damage.
- Test the system: Turn on the ignition and test the system that was previously not working to see if it’s functioning properly now. If the fuse blows again immediately, there may be an underlying electrical issue that needs further investigation.
- Close the fuse box: If everything is working fine, close the fuse box cover and secure it in place.
- Dispose of the old fuse: If the fuse is blown, discard it properly. Do not reuse a blown fuse.
- Record the replacement: It’s a good idea to make a note of the fuse replacement in your vehicle maintenance log for future reference.
Tips:
Always use a fuse with the correct amperage rating to prevent electrical issues or damage to the vehicle.
FAQs
Fuses protect electrical circuits from overloads that could cause damage or fires in the 2022 Hyundai Veloster.
A blown fuse can often be identified by a visibly melted wire inside the fuse, or by using a multimeter to check for continuity.
You typically only need a fuse puller or a pair of needle-nose pliers to replace a blown fuse in a 2022 Hyundai Veloster.
The fuse box in a 2022 Hyundai Veloster is usually located either in the engine bay or inside the cabin, depending on the circuit.
Access to the fuse box varies depending on its location, but it usually involves removing a cover or panel.
It’s important to use the correct type and amperage of fuse specified for each circuit in the 2022 Hyundai Veloster to avoid damage.
The amperage rating for each fuse is usually printed on the fuse itself.
This could indicate a deeper electrical issue, and it’s advisable to have the vehicle inspected by a professional technician.
It depends on which circuit the blown fuse is protecting. Some circuits are essential for safe operation and should not be driven with a blown fuse.
Common reasons for blown fuses in a 2022 Hyundai Veloster include short circuits, overloaded circuits, or faulty electrical components.
Avoid overloading electrical circuits, regularly inspecting wiring and components for damage, and using the correct amperage fuses can help prevent blown fuses.
Replacing a blown fuse in a 2022 Hyundai Veloster is typically a straightforward task, but if you’re unsure or if there are recurrent issues, consulting a professional technician is advisable.
You can typically replace a blown fuse yourself as long as you follow safety precautions and have the necessary tools and replacement fuses. However, if you’re unsure or uncomfortable, it’s always best to consult a professional mechanic.
If replacing the fuse doesn’t resolve the problem, there may be a more significant electrical issue that requires professional diagnosis and repair.
See the fuse diagram on the fuse box cover. It will provide a layout of the fuses and their corresponding components.
Useful Links
View Full PDF: Hyundai Veloster 2022 User Guide | Auto User Guide
2023 – 2024 Hyundai Tucson Review, Specs, Price And Mileage (Brochure)
Display Setting: 2022 Hyundai Veloster Screen Messages Guide