Fuses and fuse box: 2014 Hyundai Veloster Fuse Diagrams
The electrical system of the 2014 Hyundai Veloster depends on a precisely planned fuse box and a network of carefully placed fuses to guarantee the smooth operation of the car’s numerous parts. The vehicle’s fuse box, which is placed in a strategic location, houses fuses with different amperage ratings that serve as barriers to prevent electrical overloads or malfunctions. It is essential to comprehend the fuse diagram, which is a comprehensive map that shows the assignment of each fuse, in order to diagnose and successfully resolve electrical problems. The purpose of this article is to give a clear overview of the fuse system of the 2014 Hyundai Veloster, with a focus on the fuse diagram’s critical role in preserving the best possible electrical functionality. It provides car owners with the information they need to locate specific fuses, handle possible electrical problems, and explore the fuse box, ultimately leading to a dependable and effective driving encounter.
2024 Hyundai Staria Specs, Price, Features, Milage (Brochure)
FUSES
A vehicle’s electrical system is protected from electrical overload damage by fuses. This vehicle has 2 fuse panels, one located in the driver’s side panel bolster, the other in the engine compartment. If any of your vehicle’s lights, accessories, or controls do not work, check the appropriate circuit fuse. If a fuse has blown, the element inside the fuse will be melted. If the electrical system does not work, first check the driver’s side fuse panel. Always replace a blown fuse with one of the same rating. Before replacing a blown fuse, disconnect the negative battery cable. If the replacement fuse blows, this indicates an electrical problem. Avoid using the system involved and immediately consult an authorized HYUNDAI dealer. Three kinds of fuses are used: blade type for lower amperage rating, cartridge type, and multi fuse for higher amperage ratings.
WARNING – Fuse replacement
- Never replace a fuse with anything but another fuse of the same rating.
- A higher capacity fuse could cause damage and possibly a fire.
- Never install a wire or aluminium foil instead of the proper fuse – even as a temporary repair. It may cause extensive wiring damage and a possible fire.
CAUTION
Do not use a screwdriver or any other metal object to remove fuses because it may cause a short circuit and damage the system.
NOTICE
The actual fuse/relay panel label may differ from the equipped items.
CAUTION
- When replacing a blown fuse or relay with a new one, make sure the new fuse or relay fits tightly into the clips. The incomplete fastening fuse or relay may cause the vehicle wiring and electric systems damage and a possible fire.
- Do not remove fuses, relays and terminals fastened with bolts or nuts. The fuses, relays and terminals may be fastened incompletely, and it may cause a possible fire. If fuses, relays and terminals fastened with bolts or nuts are blown, consult with an authorized HYUNDAI dealer.
- Do not input any other objects except fuses or relays into fuse/relay terminals such as a driver or wiring. It may cause contact failure and system malfunction.
Instrument panel fuse replacement
- Turn the ignition switch and all other switches off.
- Open the fuse panel cover.
- Pull the suspected fuse straight out. Use the removal tool provided in the engine compartment fuse panel.
- Check the removed fuse; replace it if it is blown.
- Push in a new fuse of the same rating, and make sure it fits tightly in the clips.
If it fits loosely, consult an authorized HYUNDAI dealer. If you do not have a spare, use a fuse of the same rating from a circuit you may not need for operating the vehicle, such as the cigarette lighter fuse. If the headlights or other electrical components do not work and the fuses are OK, check the fuse panel in the engine compartment. If a fuse is blown, it must be replaced.
Fuse switch
Always, put the fuse switch at the ON position. If you move the switch to the OFF position, some items must be reset and the transmitter (or smart key) may not work properly.
CAUTION
Always place the fuse switch in the ON position while driving the vehicle.
Engine compartment fuse replacement
- Turn the ignition switch and all other switches off.
- Remove the fuse panel cover by pressing the tab and pulling up.
- Check the removed fuse; replace it if it is blown. To remove or insert the fuse, use the fuse puller in the engine compartment fuse panel.
- Push in a new fuse of the same rating, and make sure it fits tightly in the clips. If it fits loosely, consult an authorized HYUNDAI dealer
CAUTION
After checking the fuse panel in the engine compartment, securely install the fuse panel cover. If not, electrical failures may occur from water contact.
Multi fuse
If the multi fuse is blown, it must be removed as follows:
- Remove the fuse panel in the engine compartment.
- Remove the nuts shown in the picture above.
- Replace the fuse with a new one of the same rating.
- Reinstall in the reverse order of removal.
✽ NOTICE
If the main or multi fuse is blown, consult an authorized HYUNDAI dealer.
Fuse/relay panel description Inner fuse panel
Inside the fuse/relay panel covers, you can find the fuse/relay label describing fuse/relay name and capacity.
✽ NOTICE
Not all fuse panel descriptions in this manual may be applicable to your vehicle. It is accurate at the time of printing. When you inspect the fuse panel in your vehicle, refer to the fuse panel label.
Description |
Fuse rating |
Protected component |
C/LIGHTER |
15A |
Cigarette Lighter |
DRL |
10A |
Not Used |
HTD STRG |
15A |
Smart Key Control Module, A/C Inverter Module, Steering wheel heated |
MDPS |
10A |
EPS Control Module |
A/BAG IND |
10A |
Instrument Cluster (Air Bag IND.) |
POWER OUTLET |
15A |
Power Outlet |
WIPER RR |
15A |
Engine Room Fuse & Relay Box (Rear Wiper Relay), Rear Wiper Motor, Multifunction Switch |
IG 2 |
10A |
Engine Room Fuse & Relay Box (Front Wiper Relay, Blower Relay), Crash Pad Switch, Panaroma Sunroof Motor, A/C Control Module, IPS Control Module |
WIPER FRT |
25A |
Multifunction Switch, Front Wiper Motor, Engine Room Fuse & Relay Box (Front Wiper Relay) |
CLUSTER |
10A |
Instrument Cluster, Tire Pressure Monitoring Module, Sport Mode Switch, Shift Lever Indicator, MTS Module |
AUDIO |
10A |
Power Outside Mirror Switch, AMP, A/V & Navigation Head Unit, MTS Module, Smart Key Control Module, IPS Control Module |
MULTIMEDIA |
15A |
A/V & Navigation Head Unit, MTS Module |
A/BAG |
15A |
Passenger Occupant Detection Sensor, SRS Control Module, Telltale |
IG 1 |
10A |
Rear Parking Assist Sensor LH/RH, Rear Parking Assist Sensor Center LH/RH, Rear Parking Assist Buzzer, IPS Control Module, Driver/Passenger Seat Warmer, Driver/Passenger Seat Warmer Switch, MTS Module, A/C Control Module |
1 SMART KEY |
15A |
Smart Key Control Module |
MEMORY |
10A |
Data Link Connector, Instrument Cluster, A/C Control Module |
A/CON |
10A |
ECM |
ABS |
10A |
ESC Module, ESC Off Switch, E/R Fuse & Relay Box (HAC Relay, Multipurpose Check Connector) |
DR LOCK |
20A |
Door Lock Relay, Door Unlock Relay, Flasher Sound Relay, Tail Gate Latch Relay, Two Turn Unlock Relay, IPS Control Module |
FOLD’G MIRR/ FOG LP RR |
15A |
Not Used |
Description |
Fuse rating |
Protected component |
|
STOP LAMP |
15A |
Stop Lamp Switch, Stop Signal Relay, Smart Key Control Module |
|
ECU |
10A |
Immobilizer Module, Smart Key Control Module, ECM, Stop Lamp Switch |
|
AMP |
25A |
AMP |
|
INVERTER |
25A |
A/C Inverter Module |
|
INTERIOR LAMP |
10A |
Luggage Room Lamp, Map Lamp, Room Lamp, Vanity Lamp LH/RH, Overhead Console Lamp |
|
2 SMART KEY |
10A |
Smart Key Control Module, Immobilizer Module, Start Stop Button Switch |
|
TCU * (VACUUM PUMP) |
T-GDI |
15A |
Engine Room Fuse & relay box (Vacuum Pump Relay) |
GDI |
15A |
TCM |
|
TAIL LAMP LH |
10A |
Rear Combination Lamp LH, License Lamp LH/RH, Shift Lever Indicator, Instrument Cluster, Multifunction Switch, Passenger Power Window Switch, Power Window Main Switch, AUX & USB Jack, Inside Miiror A/C Control Module, ESC Off Switch, A/V & Navigation Head Unit, Crash Pad Switch, Driver/Passenger Seat Warmer Switch, Head Lamp LH |
|
S/HEATER |
20A |
Driver/Passenger Seat Warmer |
|
P/WDW LH |
25A |
Power Window Main Switch |
|
START |
10A |
Burglar Alarm Relay, Transaxle Range Switch, Smart Key Control Module, ECM, TCM, Engine Room Fuse & Relay Box (Start Relay) |
|
1 B/UP LP |
15A |
Back-Up Lamp Switch, Transaxle Range Switch |
|
TAIL LAMP RH |
10A |
Head Lamp RH, Rear Combination Lamp RH |
|
SAFETY POWER WINDOW |
25A |
Driver Safety Power Window Module |
|
P/WDW RH |
25A |
Power Window Main Switch, Passenger Power Window Switch, Rear Power Window Switch RH |
|
2 B/UP LAMP |
10A |
A/V & Navigation Head Unit, Transaxle Range Switch, MTS Module, TCM, Back-Up Lamp Switch, Rear Combination Lamp LH/RH, IPS Control Module |
|
SPARE |
15A |
– |
|
HTD MIRR |
10A |
ECM, A/C Control Module, Dirver/Passenger Power Outside Mirror |
|
P/SEAT DRV |
25A |
Lumber Support |
Instrument panel (Driver’s side fuse panel)
Engine compartment main fuse panel
Description |
Fuse rating |
Protected component |
||
MULTI FUSE |
MDPS |
80A |
EPS Control Module |
|
BLOWER |
40A |
Engine Room Fuse & Relay Box (Blower Relay) |
||
1 DCT |
GDI |
40A |
TCM |
|
RR HTD |
40A |
Engine Room Fuse & Relay Box (Rear Defogger Relay) |
||
ALT |
GDI |
125A |
Engine Room Fuse & Relay Box (Multi Fuse – EcoShift dual-clutch transmission 1, MDPS, RR HTD, BLOWER), Alternator |
|
T-GDI |
150A |
|||
2 ABS |
30A |
Multipurpose Check Connector, ESC Module |
||
2 B+ |
50A |
Smart Junction Box (Power Window Relay, IPS Control Module (ARISU LT), Fuse-SAFETY POWER WINDOW, AMP) |
||
1 B+ |
50A |
Leak Current Autocut Device (Room Lamp Relay, Leak Current Autocut Switch, Fuse – INTERIOR LAMP, MULTIMEDIA, MEMORY ), Fuse – S/HEATER |
||
FUSE |
C/FAN |
GDI |
40A |
Engine Room Fuse & Relay Box (Cooling Fan (High) Relay, Cooling Fan (Low) Relay) |
T-GDI |
60A |
Engine Room Fuse & Relay Box (Cooling Fan (High) Relay) |
||
A/CON |
10A |
Engine Room Fuse & Relay Box (A/CON Relay) |
||
FOG LAMP FRT |
10A |
Engine Room Fuse & Relay Box (Fog Lamp Relay) |
||
HORN |
15A |
Engine Room Fuse & Relay Box (Burglar Alarm Horn Relay, Horn Relay) |
||
SUNROOF |
20A |
Panorama Sunroof Motor |
||
VACUUM PUMP |
T-GDI |
20A |
Engine Room Fuse & Relay Box (Vacuum Pump Relay) |
|
AMS |
10A |
Battery Sensor |
||
IG 2 |
40A |
Ignition Switch, PDM Relay Box (IG 2 Relay), Engine Room Fuse & Relay Box (Start Relay) |
||
IG 1 |
40A |
Ignition Switch, PDM Relay Box (IG 1 Relay, ACC Relay) |
Description |
Fuse rating |
Protected component |
||
FUSE |
1 SENSOR |
20A |
ECM |
|
2 SENSOR |
GDI |
10A |
Oxygen Sensor (Up)/(Down), Canister Close Valve, Variable Intake Solenoid Valve, Purge Control Solenoid Valve, Engine Room Fuse & Relay Box (Cooling Fan (High/Low) Relay) |
|
T-GDI |
10A |
Oxygen Sensor (Up)/(Down), Canister Close Valve, Recirulation valve, Waste gate valve, Purge Control Solenoid Valve, Engine Room Fuse & Relay Box (Cooling Fan (High) Relay) |
||
3 SENSOR |
15A |
Engine Room Fuse & Relay Box (Fuel Pump Relay), Engine Room Fuse & Relay Box (A/CON Relay), Oil Control Valve #1 (Intake)/#2 (Exhaust), ECM |
||
2 ECU |
15A |
ECM |
||
3 DCT |
GDI |
15A |
TCM |
|
F/PUMP |
GDI |
15A |
Engine Room Fuse & Relay Box (Fuel Pump Relay) |
|
T-GDI |
20A |
|||
1 ABS |
40A |
ESC Module |
||
1 ECU |
30A |
Engine Room Fuse & Relay Box (Engine Conrol Relay, Fuse – ECU 2) |
||
2 DCT |
GDI |
40A |
TCM |
|
3 B+ |
50A |
Smart Junction Box (Tail Lamp Relay, IPS Control Module (ARISU RT), Fuse – STOP LP, SMART KEY 1/2, INVERTER 2, DR LOCK ) |
||
3 ECU |
10A |
Sport Mode Switch, Key Solenoid |
||
4 ECU |
15A |
Condenser, Ignition coil #1/#2/#3/#4 |
FAQs
The fuse box houses fuses that protect various electrical components by breaking the circuit in case of an overload or fault.
The fuse box is typically located in [insert specific location].
The fuse diagram is a visual representation that illustrates the assignment of each fuse, aiding in identifying specific circuits and their corresponding components.
The fuse diagram details the amperage rating and purpose of each fuse, offering a comprehensive guide to the electrical system.
It’s advisable to refer to the fuse diagram when troubleshooting electrical issues or performing maintenance, ensuring accurate identification and replacement of fuses.
Yes, the fuse diagram is a valuable tool for pinpointing the source of electrical issues by identifying the corresponding fuses.
Yes, the Hyundai Veloster may use various types of fuses, including blade-type fuses and cartridge fuses.
The amperage rating indicates the amount of current the fuse can handle before breaking the circuit. It’s crucial to use fuses with the correct amperage.
It is not recommended to use a fuse with a higher amperage rating, as it may compromise the safety of the vehicle’s electrical system.
Before replacing fuses, turn off the vehicle, disconnect the battery, and follow safety guidelines outlined in the vehicle’s manual to avoid electrical hazards.
Hyundai Veloster typically comes with spare fuses, and their locations are often indicated in the fuse box cover or manual.
The fuse diagram maps out the location of each fuse and its corresponding number, aiding in precise identification within the fuse box.
Yes, extreme temperatures can affect fuse performance, so it’s crucial to ensure they are in good condition.
Yes, fuses are often grouped by system, such as interior lights, audio system, or power windows, as indicated in the fuse diagram.
The fuse diagram is usually found in the vehicle’s manual, and a copy may also be available on the inside of the fuse box cover.
Useful Link
View Full PDF: 2014 Hyundai Veloster Owner’s Manual
2024 Hyundai Staria Specs, Price, Features, Milage (Brochure)