Indicator Display: 2020 Hyundai Kona Instrument Cluster User Manual
The instrument cluster in the 2020 Hyundai Kona is a stylish and easy-to-use screen that combines style and usefulness. The cluster is placed in the line of sight of the driver and has a sleek, modern look that improves the general look of the interior. The center has many important displays that are bright and easy to read. These displays show things like the speed of the vehicle, the amount of fuel in the tank, and the engine’s revolutions per minute (RPM). A smooth and distraction-free driving experience is ensured by controls that are put out intuitively and an interface that is easy to use. Additionally, advanced features like navigation prompts and safety alerts make driving easier and safer overall. The instrument cluster in the 2020 Hyundai Kona is the right mix of form and function. It takes driving to a whole new level of sophistication.
2023 Hyundai KONA Specs, Price, Features, Milage (Brochure)
INSTRUMENT CLUSTER
Type A
Type B
- Tachometer
- Speedometer
- Engine coolant temperature gauge
- Fuel gauge
- Warning and indicator lights
- LCD display (including Trip computer)
The actual cluster in the vehicle may differ from the illustration.
For more information, refer to the “Gauges and Meters” in this chapter.
Instrument Cluster Control
Adjusting instrument cluster illumination
- When the vehicle’s position lights or headlights are on, press the illumination control button to adjust the brightness of the instrument panel illumination.
- When pressing the illumination control button, the interior switch illumination intensity is also adjusted.
WARNING: Never adjust the instrument cluster while driving. Doing so could lead to driver distraction which may cause an accident and lead to vehicle damage, serious injury, or death.
- The brightness of the instrument panel illumination is displayed.
- If the brightness reaches the maximum or minimum level, a chime will sound.
For information regarding the illumination setting on your audio display, refer to the “Setup” section of your Audio or Navigation manual.
2023 Hyundai KONA Specs, Price, Features, Milage (Brochure)
Gauges and Meters
Speedometer
The speedometer indicates the speed of the vehicle and is calibrated in miles per hour (MPH) and/or kilometers per hour (km/h).
Tachometer
- The tachometer indicates the approximate number of engine revolutions per minute (rpm).
- Use the tachometer to select the correct shift points and to prevent lugging and/or over-revving the engine.
NOTICE: Do not operate the engine within the tachometer’s RED ZONE. This may cause severe engine damage.
Engine coolant temperature gauge
- This gauge indicates the temperature of the engine coolant when the ignition switch is in the ON position.
NOTICE
- If the gauge pointer moves beyond the normal range area toward the “H” position, it indicates overheating that may damage the engine.
- Do not continue driving with an overheated engine. If your vehicle overheats, refer to “If the Engine Overheats” in chapter 6.
WARNING
Never remove the radiator cap or reservoir cap when the engine is hot. The engine coolant is under pressure and could severely burn.Wait until the engine is cool before adding coolant to the reservoir.
Fuel gauge
- This gauge indicates the approximate amount of fuel remaining in the fuel tank.
Information
- The fuel tank capacity is given in chapter 8.
- The fuel gauge is supplemented by a low fuel warning light, which will illuminate when the fuel tank is nearly empty.
- On inclines or curves, the fuel gauge pointer may fluctuate or the low fuel warning light may come on earlier than usual due to the movement of fuel in the tank.
WARNING
- Running out of fuel can expose vehicle occupants to danger.
- You must stop and obtain additional fuel as soon as possible after the warning light comes on or when the gauge indicator comes close to the “E (Empty)” level.
NOTICE
Avoid driving with an extremely low fuel level. Running out of fuel could cause the engine to misfire damaging the catalytic converter.
Outside temperature gauge
This gauge indicates the current outside air temperature by 1°F (1°C).
- Temperature range: -40°F ~ 140°F
- (-40°C ~ 60°C)
Note that the temperature indicated on the LCD display may not change as quickly as the outside temperature (there may be a slight delay before the temperature changes.)
You can change the temperature unit from °F to °C or °C to °F in the User Settings mode in the cluster:
- – Go to User Settings Mode ➝ Other ➝ Temperature Unit.
For vehicles equipped with Automatic Climate Control, you can also:
- Press and hold the AUTO and OFF buttons on the climate control unit for 3 seconds
Both the temperature unit on the cluster LCD display and climate control screen will change.
Odometer
The odometer indicates the total distance that the vehicle has been driven and should be used to determine when periodic maintenance should be performed.
Range
- The range is the estimated distance the vehicle can be driven with the remaining fuel.
- If the estimated distance is below 1 mi. (1 km), the trip computer will display “—-” as range.
Information
- If the vehicle is not on level ground or the battery power has been interrupted, the range function may not operate correctly.
- The range may differ from the actual driving distance as it is only an estimate of the available driving range for the vehicle and driving conditions.
- The trip computer may not register additional fuel if less than 1.6 gallon (6 liters) of fuel are added to the vehicle.
- The range may vary significantly based on driving conditions, driving habits, and the condition of the vehicle.
Transmission shift indicator
Automatic transmission/ Dual clutch transmission shift indicator
This indicator displays the gear position of the shift lever.
- Park: P
- Reverse: R
- Neutral: N
- Drive: D
- Sport Mode
- Auto Transmission: 1, 2, 3, 4, 5, 6
- Dual Clutch Transmission: 1, 2, 3, 4, 5, 6, 7
Shift indicator pop-up
The pop-up indicates the current gear position displayed in the cluster for about 2 seconds when shifting into other positions (P/R/N/D).
FAQs
The instrument cluster displays essential information such as vehicle speed, fuel level, trip information, tire pressure, warning lights, and various vehicle settings.
You can typically navigate through different screens by using buttons on the steering wheel labeled “Mode,” “Menu,” or “Info.” These buttons allow you to cycle through various information screens.
Depending on your vehicle’s configuration, you may be able to customize the display to show preferred information.
Yes, you can usually adjust the brightness of the display to suit your preference or driving conditions. Look for brightness adjustment settings in the instrument cluster menu.
The instrument cluster may display maintenance alerts and service reminders based on mileage and time intervals. You can typically access this information through the display’s menu.
Warning lights on the instrument cluster indicate various vehicle issues or system malfunctions.
Yes, if your Hyundai Kona is equipped with advanced driver assistance systems (ADAS), you can access and adjust settings for features like adaptive cruise control and lane-keeping assist through the instrument cluster menu.
Typically, you can reset trip information such as trip mileage, fuel economy, and trip duration through the instrument cluster’s menu.
Yes, many instrument clusters provide real-time fuel economy data to help you monitor your driving efficiency and fuel consumption.
Useful Link
View Full PDF: 2020 Hyundai Kona | Auto User Guide
Fuse Box Diagram: 2020 Hyundai Kona Fuses and Fuse Box Guide