Infiniti QX50 2021 User Manual

Meet the 2021 Infiniti QX50, a stylish, fast, and technologically advanced small SUV that combines luxury and innovation. The body of the QX50 is sleek and modern, making it stand out on the road. It looks both elegant and sporty. This SUV has a revolutionary VC-Turbo engine that gives it a lot of power and great gas mileage, making it a great choice for people who don’t want to give up on performance. When you step inside the carefully made cabin, you’ll find a roomy, luxury interior with high-quality materials and high-tech features. The QX50 has state-of-the-art technology, like a dual-screen entertainment system and a variety of driver-assistance technologies that make it easier to stay connected and safer on the road. The QX50 is ready for any journey with confidence and style thanks to its smooth and comfortable ride, large cargo space, and smart all-wheel drive system. The 2021 Infiniti QX50 changes the way people think about compact SUVs by combining luxury, speed, and new ideas in a way that sets new standards in its class.

REAR WINDOW AND OUTSIDE MIRROR DEFROSTER SWITCH

To defog/defrost the rear window glass and outside mirrors, start the engine and push the switch on. The indicator light will come on. Push the switch again to turn the defroster off.
It will automatically turn off in approximately 15 minutes.
If the engine is started using the remote start function (if so equipped) when the outside air temperature, the interior temperature and the engine coolant temperature are low, the rear window glass and outside mirror defroster may turn on automatically. For additional information about the remote engine start function, see “Remote engine start”.

High beam assist (if so equipped)
The high beam assist system will operate when the vehicle is driven at speeds of approximately 22 MPH (35 km/h) and above. If an oncoming vehicle or leading vehicle appears in front of your vehicle when the headlight high beam is on, the headlight will be switched to the low beam automatically.

Precautions on high beam assist:

WARNING

1. The high beam assist system is a convenience but it is not a substitute for safe driving operation. The driver should remain alert at all times, ensure safe driving practices and switch the high beams and low beam manually when necessary.
2. The high beam or low beam may not switch automatically under the following conditions. Switch the high beam and low beam manually.
   1. During bad weather (rain, fog, snow, wind, etc.).
   2. When a light source similar to a headlight or tail light is in the vicinity of the vehicle.
   3. When the headlights of the on-coming vehicle or the leading vehicle are turned off, when the color of the light is affected due to foreign materials on the lights, or when the light beam is out of position.
   4. When there is a sudden, continuous change in brightness.
   5. When driving on a road that passes over rolling hills, or a road that has level differences.
   6. When driving on a road with many curves.
   7. When a sign or mirror-like surface is reflecting intense light towards the front of the vehicle.
   8. When the container, etc. being towed by a leading vehicle is reflecting intense light.
   9. When a headlight on your vehicle is damaged or dirty.
   10. When the vehicle is leaning at an angle due to a punctured tire, being towed, etc.
3. . The timing of switching the low beam and high beam may change under the following situations.
   1. The brightness of the headlights of the oncoming vehicle or leading vehicle.
   2. The movement and direction of the oncoming vehicle and the leading vehicle.
   3. When only one light on the on-coming vehicle or the leading vehicle is illuminated.
   4. When the oncoming vehicle or the leading vehicle is a two-wheeled vehicle.
   5. Road conditions (incline, curve, road surface, etc.).
   6. The number of passengers and the amount of luggage.

High beam assist operations:
To activate the high beam assist system, turn the headlight switch to the AUTO position and push the lever forward (high beam position). The high beam assist indicator light in the meter will illuminate while the headlights are turned on. If the high beam assist indicator light does not illuminate in the above condition, it may indicate that the system is not functioning properly. It is recommended you have the system checked by an INFINITI retailer. When the vehicle speed lowers to less than approximately 17 MPH (27 km/h), the headlight remains the low beam. To turn off the high beam assist system, turn the headlight switch to the position or select the low beam position by placing the lever in the neutral position.

Ambient image sensor maintenance:
The ambient image sensor for the high beam assist system is located in front of the inside mirror. To keep the proper operation of the high beam assist system and prevent a system malfunction, be sure to observe the following:

1. Always keep the windshield clean.
2. Do not attach a sticker (including transparent material) or install an accessory near the ambient image sensor.
3. Do not strike or damage the areas around the ambient image sensor. Do not touch the sensor lens that is located on the ambient image sensor.

Caution:

1. When you turn on the headlight switch again after the lights auto-matically turn off, the lights will not turn off automatically. Be sure to turn the light switch to the OFF position when you leave the vehicle for extended periods of time, other-wise the battery will be discharged.
2. Never leave the light switch on when the engine is not running for a period of time even if the headlights turn off automatically.

WARNING
When the daytime running light system is active, tail lights on your vehicle are not on. It is necessary at dusk to turn on your headlights. Failure to do so could cause an accident injuring yourself and others.

Instrument brightness control
The instrument brightness control switch can be operated when the ignition switch is in the ON position. When the switch is operated, the vehicle information display switches to the brightness adjustment mode.
Push the + side of the switch to brighten the instrument panel lights. The bar moves to the + side.

HEATED SEATS (if so equipped)

WARNING:
Do not use or allow occupants to use the seat heater if you or the occupants cannot monitor elevated seat temperatures or have the inability to feel pain in those body parts in contact with the seat. Use of the seat heater by such people could result in serious injury.

CAUTION

1. The battery could run down if the seat heater is operated while the engine is not running.
2. Do not use the seat heater for extended periods or when no one is using the seat.
3. Do not put anything on the seat which insulates heat, such as a blanket, cushion, seat cover, etc. Otherwise, the seat may become overheated.
4. Do not place anything hard or heavy on the seat or pierce it with a pin or similar object. This may result in damage to the heater.
5. Any liquid spilled on the heated seat should be removed immediately with a dry cloth.
6. When cleaning the seat, never use gasoline, thinner, or any similar materials.
7. If any malfunctions are found or the heated seat does not operate, turn the switch off and have the system checked. It is recommended you visit an INFINITI retailer for this service.

Useful Link

Download link:https://www.infinitiusa.com/owners/vehicle-resources/manuals-guides.html