Instrument Cluster: 2014 Hyundai Sonata Dashboard Guide
The instrument cluster of the 2014 Hyundai Sonata functions as a key hub for information, conveying important details about the state of the car through a variety of indicators and cautionary markings. This digital screen, which is mounted conspicuously behind the steering wheel, reads data from many automotive systems and presents it to the driver visually. These warning signs are essential to guarantee a safe and knowledgeable driving experience, whether they are indicating engine problems, tire pressure difficulties, or safety systems like airbags and ABS. This in-depth manual explores the subtleties of the warning and indicator symbols on the 2014 Hyundai Sonata, providing drivers with the knowledge they need to react quickly to possible problems and promoting both road safety and the longevity of the vehicle.
2023 Hyundai Sonata Specs, Price, Features, Milage (Brochure)
INSTRUMENT CLUSTER
- Type A
- Type B
- Tachometer
- Turn signal indicators
- Speedometer
- Engine temperature gauge
- Warning and indicator lights
- Fuel gauge
- Odometer/Trip computer
* The actual cluster in the vehicle may differ from the illustration. For more details refer to the “Gauges” section in the next pages
Instrument panel illumination
When the vehicle’s parking lights or headlights are on, move the illumination control knob to adjust the brightness of the instrument panel illumination. The illumination intensity will show on the LCD screen.
Gauges
Speedometer
The speedometer indicates the speed of the vehicle. The speedometer is calibrated in miles per hour and/or kilometers per hour.
Tachometer
The tachometer indicates the approximate number of engine revolutions per minute (rpm). Use the tachometer to select the correct shift points and to prevent lugging and/or over-revving the engine. When the door is open, or if the engine is not started within 1 minute, the tachometer pointer may move slightly in ON position with the engine OFF. This movement is normal and will not affect the accuracy of the tachometer once the engine is running.
CAUTION
Do not operate the engine within the tachometer’s RED ZONE. This may cause severe engine damage.
Engine temperature gauge
This gauge shows the temperature of the engine coolant when the ignition switch is ON. Do not continue driving with an overheated engine. If your vehicle overheats, refer to “If the engine overheats” in section 6.
CAUTION
If the gauge pointer moves beyond the normal range area toward the “H” position, it indicates overheating that may damage the engine.
WARNING
Never remove the radiator cap when the engine is hot. The engine coolant is under pressure and could cause severe burns. Wait until the engine is cool before adding coolant to the reservoir.
Fuel gauge
The fuel gauge indicates the approximate amount of fuel remaining in the fuel tank. The fuel tank capacity is given in section 8. The fuel gauge is supplemented by a low fuel warning light, which will illuminate when the fuel tank is near empty. On inclines or curves, the fuel gauge pointer may fluctuate or the low fuel warning light may come on earlier than usual due to the movement of fuel in the tank.
WARNING – Fuel gauge
Running out of fuel can expose vehicle occupants to danger. You must stop and obtain additional fuel as soon as possible after the warning light comes on or when the gauge indicator comes close to the E level.
CAUTION
Avoid driving with a very low fuel level. Running out of fuel could cause the engine to misfire, damaging the catalytic converter.
Trip computer
The trip computer is a microcomputer-controlled driver information system that displays information related to driving on the LCD screen when the ignition switch is in the ON position. If the battery is disconnected, then all stored driving information (except the odometer) is reset.
* : if equipped
Odometer (mi. or km)
The odometer indicates the total distance the vehicle has been driven. You will also find the odometer useful to determine when periodic maintenance should be performed. The odometer is always displayed until the display is turned off.
Tripmeter (mi. or km)
- TRIP A : Tripmeter A
- TRIP B : Tripmeter B
This mode indicates the distance of individual trips selected since the last trip meter reset. The meter’s working range is from 0.0 to 9999.9 miles (0.0 to 9999.9 km). Pressing the RESET button for more than 1 second, when the trip meter (TRIP A or TRIP B) is being displayed, clears the trip meter to zero (0.0).
Distance to empty (mi. or km)
This mode indicates the estimated distance to empty based on the current fuel in the fuel tank and the amount of fuel delivered to the engine. When the remaining distance is below 30 miles (50 km), “—” will be displayed and the distance to empty indicator will blink. The meter’s working range is from 30 to 999 miles (50 to 999 km).
Average fuel consumption (if equipped) (MPG or l/100 km)
This mode calculates the average fuel consumption from the total fuel used and the distance since the last average consumption reset. The total fuel used is calculated from the fuel consumption input. For an accurate calculation, drive more than 0.03 miles (50 m). Pressing the RESET button for more than 1 second, when the average fuel consumption is being displayed, clears the average fuel consumption to zero (—-). If the vehicle speed exceeds 1.6 MPH (1km/h) after being refueled with more than 1.6 gallons (6 l), the average fuel consumption will be cleared to zero (—-).
Instant fuel consumption (MPG or l/100km)
This mode calculates the instant fuel consumption every 2 seconds (supervision type : every 0.2 seconds) from the driving distance and quantity of fuel injection.
Average speed (MPH or km/h)
This mode calculates the average speed of the vehicle since the last average speed reset.Even if the vehicle is not in motion, the average speed keeps changing while the engine is running. Pressing the RESET button for more than 1 second, when the average speed is being displayed, clears the average speed to zero (—).
Elapsed time
This mode indicates the total time traveled since the last driving time reset. Even if the vehicle is not in motion, the driving time keeps increasing while the engine is running. The meter’s working range is from 00:00~99:59. Pressing the RESET button for more than 1 second, when the driving time is being displayed, clears the driving time to zero (00:00).
NOTICE
- If the vehicle is not on level ground or the battery power has been interrupted, the “Distance to empty” function may not operate correctly. The trip computer may not register additional fuel if less than 1.6 gallons (6 liters) of fuel are added to the vehicle.
- The fuel consumption and distance to empty values may vary significantly based on driving conditions, driving habits, and the condition of the vehicle.
- The distance to empty value is an estimate of the available driving distance. This value may differ from the actual driving distance available.
Vehicle setting
When the vehicle is at a standstill, pressing the TRIP button for more than 2 seconds with the engine start/stop button in the ON position or engine running, the LCD screen on the cluster will change to the vehicle setting mode. You can change the item by pressing the TRIP button and choose the item by pressing the RESET button.
Auto door lock
Off – The auto door lock operation will be canceled.
Speed – All doors will be automatically locked when the vehicle speed exceeds 9.3mph (15km/h).
Shift Lever (if equipped) –
All doors will be automatically locked if the shift lever is shifted from the P(Park) position to the R(Reverse), N(Neutral) or D(Drive) position.
Auto door unlock
- Off – The auto door unlock operation will be cancelled.
- Key Out – All doors will be automatically unlocked when the ignition key is removed from ignition switch (or smart key is removed from the smart key holder).
- Door – All doors will be automatically unlocked if the driver’s door is unlocked inside.
Shift Lever (if equipped) –
All doors will be automatically unlocked if the shift lever is shifted to the P(Park) position.
Two-press unlock
- Driver Door 1st Press – The driver’s door will unlock when pressing the unlock button on the transmitter or smart key, pressing the button of the driver’s outside door handle with the smart key, or inserting the key into the keyhole of the driver’s outside door and turning the key toward the rear of the vehicle. All doors will unlock when pressing the unlock button on the transmitter or smart key, pressing the button of the driver’s outside door handle with the smart key, or inserting the key into the key hole of the driver’s outside door and turning the key toward the rear of the vehicle within 4 seconds.
- All Doors 1st Press – All doors will unlock when pressing the unlock button on the transmitter or smart key, pressing the button of the driver’s outside door handle with the smart key, or inserting the key into the keyhole of the driver’s outside door and turning the key toward the rear of the vehicle.
Headlamp delay
- On – If you turn the ignition switch to the ACC or OFF position with the headlamp ON, the headlamps remain on for about 20 minutes. Also, the headlamp welcome operation will be activated. Refer to the [LIGHTING] section in this chapter.
- Off – The headlamp delay and headlamp welcome operation will be cancelled.
Horn feedback (if equipped)
- On – After locking the door by pressing the lock button on the transmitter, if you press the lock button again within 4 seconds, the warning sound will operate once to indicate that all doors are locked.
- Off – The Horn feedback operation will be cancelled.
FAQs
Warning symbols convey crucial information about the vehicle’s status, covering areas such as engine health, tire pressure, and safety features.
Indicator lights typically signify normal functions, while warning symbols indicate potential issues requiring attention.
Common symbols include those related to the engine, tire pressure, ABS, airbags, and more.
It depends on the severity of the warning. Some issues may allow you to continue driving with caution, while others may require immediate attention.
Refer to the vehicle’s manual for a detailed guide on each warning symbol and its corresponding meaning.
The check engine light signals a potential issue with the engine or emissions system. It’s recommended to have it checked promptly.
Check the tire pressure of all tires and inflate or deflate them as needed. The proper tire pressure values can be found in the vehicle’s manual or on a label inside the driver’s door frame.
The ABS warning symbol indicates an issue with the anti-lock braking system. It’s advisable to have the vehicle inspected by a professional as soon as possible.
Some warning symbols may be cleared by addressing the underlying issue, while others may require professional diagnostics to reset.
Colors like red typically indicate urgent issues, while yellow or orange may signify less critical warnings. Refer to the vehicle’s manual for precise details.
Extreme temperatures can impact the vehicle’s systems, and warning symbols may appear as a result. Ensure the vehicle is in a suitable environment to assess and address any issues.
Regularly glance at the instrument cluster during vehicle startup to ensure all lights go through their normal checks, and pay attention to any illuminated warning symbols during driving.
While some warnings may allow for cautious driving until addressed, it’s generally recommended to address any warning symbols promptly to avoid potential issues.
While online resources can provide general information, the vehicle’s manual is the most accurate and detailed source for understanding specific warning symbols.
Useful Link
View Full PDF: 2014 Hyundai Sonata User Manual
2023 Hyundai Sonata Specs, Price, Features, Milage (Brochure)