Instrument cluster: 2019 Hyundai Kona Indiccators User Manual
The instrument cluster of the 2019 Hyundai Kona is a technology marvel. It combines good looks with useful features to give drivers a complete and easy-to-use interface. A lot of important information can be seen at a glance on this high-tech hub, which is the vehicle’s command center. Featuring a sleek and modern look, the cluster shows important information like speed, fuel levels, engine RPM, and more through a beautiful mix of digital and analogue elements. Its layout makes it easy for drivers to find their way around the large amount of information it contains, and extra features like navigation prompts and safety alarms make driving more enjoyable. In addition to its useful features, the 2019 Hyundai Kona’s instrument cluster shows the company’s dedication to new ideas and user-centred design, making the inside of the car look better and work better.
2023 Hyundai KONA Specs, Price, Features, Milage (Brochure)
INSTRUMENT CLUSTER
Type A
Type B
- Tachometer
- Speedometer
- Engine coolant temperature gauge
- Fuel gauge
- Warning and indicator lights
- LCD display (including Trip computer)
The actual cluster in the vehicle may differ from the illustration.
For more information, refer to the “Gauges and Meters” in this chapter.
Instrument Cluster Control
Adjusting instrument cluster illumination
When the vehicle’s position lights or headlights are on, press the illumination control button to adjust the brightness of the instrument panel illumination.
When pressing the illumination control button, the interior switch illumination intensity is also adjusted.
WARNING
Never adjust the instrument cluster while driving. Doing so could lead to driver distraction which may cause an accident and lead to vehicle damage, serious injury, or death.
- The brightness of the instrument panel illumination is displayed.
- If the brightness reaches the maximum or minimum level, a chime will sound.
For information regarding the illumination setting on your audio display, refer to the “Setup” section of your Audio or Navigation manual.
2023 Hyundai KONA Specs, Price, Features, Milage (Brochure)
Gauges and Meters
Speedometer
- The speedometer indicates the speed of the vehicle and is calibrated in miles per hour (MPH) and/or kilometers per hour (km/h).
Tachometer
- The tachometer indicates the approximate number of engine revolutions per minute (rpm).
- Use the tachometer to select the correct shift points and to prevent lugging and/or over-revving the engine.
NOTICE
Do not operate the engine within the tachometer’s RED ZONE. This may cause severe engine damage.
Engine coolant temperature gauge
- This gauge indicates the temperature of the engine coolant when the ignition switch is in the ON position.
NOTICE
- If the gauge pointer moves beyond the normal range area toward the “H” position, it indicates overheating that may damage the engine.
- Do not continue driving with an overheated engine. If your vehicle overheats, refer to “If the Engine Overheats” in chapter 6.
WARNING
Never remove the radiator cap or reservoir cap when the engine is hot. The engine coolant is under pressure and could severely burn. Wait until the engine is cool before adding coolant to the reservoir.
Fuel gauge
- This gauge indicates the approximate amount of fuel remaining in the fuel tank.
Information
- The fuel tank capacity is given in chapter 8.
- The fuel gauge is supplemented by a low fuel warning light, which will illuminate when the fuel tank is nearly empty.
- On inclines or curves, the fuel gauge pointer may fluctuate or the low fuel warning light may come on earlier than usual due to the movement of fuel in the tank.
WARNING
- Running out of fuel can expose vehicle occupants to danger.
- You must stop and obtain additional fuel as soon as possible after the warning light comes on or when the gauge indicator comes close to the “E (Empty)” level.
NOTICE
Avoid driving with an extremely low fuel level. Running out of fuel could cause the engine to misfire damaging the catalytic converter.
Outside temperature gauge
This gauge indicates the current outside air temperature by 1°F (1°C).
- Temperature range: -40°F ~ 140°F
- (-40°C ~ 60°C)
Note that the temperature indicated on the LCD display may not change as quickly as the outside temperature (there may be a slight delay before the temperature changes.)
You can change the temperature unit from °F to °C or °C to °F in the User Settings mode in the cluster:
- Go to User Settings Mode ➝ Other ➝ Temperature Unit.
For vehicles equipped with Automatic Climate Control, you can also:
- Press and hold the AUTO and OFF buttons on the climate control unit for 3 seconds
Both the temperature unit on the cluster LCD display and climate control screen will change.
Odometer
The odometer indicates the total distance that the vehicle has been driven and should be used to determine when periodic maintenance should be performed.
Range
- The range is the estimated distance the vehicle can be driven with the remaining fuel.
- If the estimated distance is below 1 mi. (1 km), the trip computer will display “—-” as range.
Information
- If the vehicle is not on level ground or the battery power has been interrupted, the range function may not operate correctly.
- The range may differ from the actual driving distance as it is only an estimate of the available driving range for the vehicle and driving conditions.
- The trip computer may not register additional fuel if less than 1.6 gallon (6 liters) of fuel are added to the vehicle.
- The range may vary significantly based on driving conditions, driving habits, and the condition of the vehicle.
Transmission shift indicator
Automatic transmission/ Dual clutch transmission shift indicator
This indicator displays the gear position of the shift lever.
- Park: P
- Reverse: R
- Neutral: N
- Drive: D
- Sport Mode
- Auto Transmission: 1, 2, 3, 4, 5, 6
- Dual Clutch Transmission: 1, 2, 3, 4, 5, 6, 7
Shift indicator pop-up
The pop-up indicates the current gear position displayed in the cluster for about 2 seconds when shifting into other positions (P/R/N/D).
FAQs
The instrument cluster displays crucial information such as speed, fuel levels, engine RPM, and other essential metrics.
The design is described as sleek and modern, contributing to the overall aesthetics of the vehicle’s interior.
The instrument cluster features a harmonious blend of digital and analog displays.
The instrument cluster may offer additional features such as navigation prompts and safety alerts to enhance the driving experience.
The layout of the instrument cluster is designed to be user-friendly, allowing drivers to navigate through information effortlessly.
The placement ensures that essential information is easily accessible without causing distraction.
Depending on the model and trim, there may be limited customization options for the displayed information.
The instrument cluster contributes to a heightened driving experience by providing essential information in a clear and efficient manner.
The modern and sleek design of the instrument cluster adds to the overall visual appeal of the vehicle’s interior.
Depending on the model, there might be different display modes or themes available for drivers to choose from.
Safety alerts displayed on the instrument cluster help drivers stay informed about potential hazards or issues.
Yes, the instrument cluster is typically backlit, ensuring clear visibility of information during nighttime driving.
Depending on the model, the instrument cluster may provide real-time information about fuel efficiency.
The inclusion of advanced features and a high-tech interface in the instrument cluster enhances the overall technological appeal of the vehicle.
The instrument cluster is designed for ease of maintenance and troubleshooting, ensuring quick access and efficient handling of any issues that may arise.
Useful Link
View Full PDF: 2019 Hyundai Kona | Auto User Guide