Instrument Cluster: 2019 Hyundai Tucson Dashboard Instructions Guide
Welcome to the 2019 Hyundai Tucson Instrument Cluster Display, the interface that makes driving a thrilling experience. This dashboard display, which was created with creativity and precision, acts as your digital cockpit by giving you quick access to vital information and guaranteeing a smooth, user-friendly interface. This instrument cluster becomes your reliable travel companion as you take off in the Hyundai Tucson, providing real-time performance insights, safety alerts, and navigation assistance. This display is your key to a connected and knowledgeable driving experience, whether you’re traveling through urban areas or heading out on an off-road adventure.
2023 Hyundai Tucson Specs, Price, Features, Milage (Brochure)
Instrument Cluster
- Tachometer
- Speedometer
- Engine coolant temperature gauge
- Fuel gauge
- Warning and indicator lights
- LCD display (including Trip computer)
The actual cluster in the vehicle may differ from the illustration.
Instrument Cluster Control
Adjusting instrument cluster illumination
When the vehicle’s parking lights or headlights are on, press the illumination control button to adjust the brightness of the instrument panel illumination. When pressing the illumination control button, the interior switch illumination intensity is also adjusted.
WARNING
Never adjust the instrument cluster while driving. Doing so could lead to driver distraction which may cause an accident and lead to vehicle damage, serious injury, or death.
- The brightness of the instrument panel illumination is displayed.
- If the brightness reaches the maximum or minimum level, a chime will sound.
Gauges and Meters
Speedometer
The speedometer indicates the speed of the vehicle and is calibrated in miles per hour (mph) and/or kilometers per hour (km/h).
Tachometer
The tachometer indicates the approximate number of engine revolutions per minute (rpm). Use the tachometer to select the correct shift points and to prevent lugging and/or over-revving the engine.
NOTICE
Do not operate the engine within the tachometer’s RED ZONE. This may cause severe engine damage.
Engine Coolant Temperature Gauge
This gauge indicates the temperature of the engine coolant when the ignition switch in the ON position.
NOTICE
If the gauge pointer moves beyond the normal range area toward the “H” position, it indicates overheating that may damage the engine.
Do not continue driving with an overheated engine. If your vehicle overheats, refer to “If the Engine Overheats” in Chapter 6.
WARNING
Never remove the radiator cap or engine coolant reservoir cap when the engine is hot. The engine coolant is under pressure and could severely burn. Wait until the engine is cool before adding coolant to the reservoir.
Fuel Gauge
This gauge indicates the approximate amount of fuel remaining in the fuel tank.
Information
- The fuel tank capacity is given in chapter 8.
- The fuel gauge is supplemented by a low fuel warning light, which will illuminate when the fuel tank is nearly empty.
- On inclines or curves, the fuel gauge pointer may fluctuate or the low fuel warning light may come on earlier than usual due to the movement of fuel in the tank.
WARNING
Running out of fuel can expose vehicle occupants to danger. You must stop and obtain additional fuel as soon as possible after the warning light comes on or when the gauge indicator comes close to the “E (Empty)” level.
NOTICE
Avoid driving with an extremely low fuel level. Running out of fuel could cause the engine to misfire, damaging the catalytic converter.
Odometer
The odometer indicates the total distance that the vehicle has been driven and should be used to determine when periodic maintenance should be performed.
Range
- The range is the estimated distance the vehicle can be driven with the remaining fuel.
- If the estimated distance is below 1 mi. (1 km), the trip computer will display “—” as a range.
Information
- If the vehicle is not on level ground or the battery power has been interrupted, the range function may not operate correctly.
- The range may differ from the actual driving distance as it is only an estimate of the available driving range for the vehicle and driving conditions.
- The trip computer may not register additional fuel if less than 1.6 gallons (6 liters) of fuel are added to the vehicle.
- The range may vary significantly based on driving conditions, driving habits, and the condition of the vehicle.
Outside temperature gauge
This gauge indicates the current outside air temperatures by 1°F (1°C).
- Temperature range : -40°F ~ 140°F (-40°C ~ 60°C)
The outside temperature on the display may not change immediately like a general thermometer to prevent the driver from being inattentive.
To change the temperature unit from °F to °C or °C to °F
- Go to User Settings Mode ➝ Other Features ➝ Temperature Unit.
- Press the AUTO button for 3 seconds while pressing the OFF button.(Automatic climate control system)
Both the temperature unit on the cluster LCD display and the climate control screen will change.
Icy Road Warning Light
This warning light is to warn the driver the road may be icy.
When the following conditions occur, the warning light (including Outside Temperature Gauge) blinks 10 times and then illuminates, and also warning chime sounds 3 times.
- The temperature on the Outside Temperature Gauge is below approximately 39°F (4°C).
Information
If the icy road warning light appears while driving, you should drive more attentively and safely refraining from over-speeding, rapid acceleration, sudden braking or sharp turning, etc.
Automatic transmission shift indicator 
This indicator displays which automatic transmission shift lever is selected.
- Park: P
- Reverse: R
- Neutral: N
- Drive: D
- Manual Shift Mode
- 1, 2, 3, 4, 5, 6
Shift indicator pop-up
The pop-up displays the current gear position selected for 2 seconds (P/R/N/D).
FAQs
The instrument cluster in the 2019 Hyundai Tucson serves as a centralized display for vital vehicle information, including speed, fuel level, engine temperature, and warning indicators.
The 2019 Hyundai Tucson may offer limited customization options for the information displayed on the instrument cluster. Check the vehicle’s settings menu for available customization features.
If you encounter issues such as inaccurate readings or failure to illuminate with the instrument cluster, it’s advisable to have your vehicle inspected by a certified Hyundai technician for diagnosis and repair.
Depending on the trim level, you can typically switch between display modes using buttons on the steering wheel or through the infotainment system interface in the 2019 Hyundai Tucson.
Regularly cleaning the instrument cluster and avoiding exposure to excessive moisture or direct sunlight can help maintain its longevity. Additionally, inspecting for signs of wear or damage is advisable.
Yes, the instrument cluster typically includes a fuel efficiency display that shows real-time and average fuel consumption, aiding in monitoring driving habits and maximizing efficiency.
While the instrument cluster itself may not have safety features, it provides essential information contributing to overall driving safety by keeping the driver informed about the vehicle’s status.
Yes, most Tucson models allow you to reset trip-related information like the trip odometer, average fuel consumption, and travel time directly from the instrument cluster menu.
The speedometer is designed to provide accurate readings under normal driving conditions in the 2019 Hyundai Tucson. However, slight variations may occur, so it’s advisable to compare with GPS speed if precise measurements are necessary.
The check engine light indicates a potential issue with the engine or emissions system. It’s crucial to have the vehicle inspected promptly to diagnose and address any underlying problems.
Yes, many modern vehicles, including the 2019 Hyundai Tucson, feature a nighttime mode that adjusts the brightness and contrast of the instrument cluster to improve visibility and reduce glare during nighttime driving.
Typically, you can navigate through the instrument cluster menus using buttons or controls on the steering wheel or by interacting with the touchscreen display, depending on Tucson’s configuration.
Yes, the instrument cluster may display various notifications and alerts such as low fuel, maintenance reminders, or safety warnings to keep you informed about the vehicle’s status.
Yes, many Tucson models are equipped with a tire pressure monitoring system (TPMS), which displays real-time tire pressure information directly on the instrument cluster.
Useful Links
View Full PDF: Hyundai Tucson 2019 User Manual| Auto User Guide
2023 Hyundai Tucson Specs, Price, Features, Milage (Brochure)