Instrument Cluster: Hyundai Sonata 2018 Dashboard Guide
The instrument cluster of the 2018 Hyundai Sonata has a sophisticated and easy-to-use dashboard that blends modern style with high-tech features. With a sleek and comfortable design, the center gives the driver a lot of important information in an easy-to-reach way. The clear, bright screen shows a lot of information, like speed, fuel level, engine temperature, and other important car data. The placement of controls and buttons that make sense improves the driving experience and makes it easier for the driver to use the car’s features while keeping their attention on the road. The 2018 Hyundai Sonata’s instrument cluster shows how much attention to both style and functionality is paid in the car industry. It combines cutting-edge technology with careful design.
2023 Hyundai Sonata Specs, Price, Features, Milage (Brochure)
Instrument Cluster
- Tachometer
- Speedometer
- Engine coolant temperature gauge
- Fuel gauge
- Warning and indicator lights
- LCD display (including Trip computer)
The actual cluster in the vehicle may differ from the illustration.
- Tachometer
- Speedometer
- Engine coolant temperature gauge
- Fuel gauge
- Warning and indicator lights
- LCD display (including Trip computer)
The actual cluster in the vehicle may differ from the illustration.
Instrument Cluster Control
Adjusting instrument cluster illumination
When the vehicle’s parking lights or headlights are on, press the illumination control button to adjust the brightness of the instrument panel illumination.
When pressing the illumination control button, the interior switch illumination intensity is also adjusted. The selected brightness of illumination can be saved in the Driver Position Memory System (if equipped).
For more information, refer to “Driver position Memory System” in this chapter.
- The brightness of the instrument panel illumination is displayed.
- If the brightness reaches the maximum or minimum level, an alarm will sound.
LCD Display Control
The LCD display modes can be changed by using the control buttons on the steering wheel.
MODE button for changing modes
- ▲, ▼ MOVE switch for changing items
- OK: SELECT/RESET button for setting or resetting the selected item
For more information on LCD Modes, refer to “LCD Display” in the next pages of this chapter.
Gauges
Speedometer
The speedometer indicates the speed of the vehicle and is calibrated in miles per hour (mph) and/or kilometres per hour (km/h).
Tachometer
The tachometer indicates the approximate number of engine revolutions per minute (rpm).
Use the tachometer to select the correct shift points and to prevent lugging and/or over-revving the engine.
NOTICE
Do not operate the engine within the tachometer’s RED ZONE. This may cause severe engine damage.
Engine Coolant Temperature Gauge
This gauge indicates the temperature of the engine coolant when the ignition switch or Engine Start/Stop button is ON.
NOTICE
If the gauge pointer moves beyond the normal range area toward the “H” position, it indicates overheating that may damage the engine.
Do not continue driving with an overheated engine. If your vehicle overheats, refer to “If the Engine Overheats” in Chapter 6.
WARNING
Never remove the radiator cap when the engine is hot. The engine coolant is under pressure and could severely burn. Wait until the engine is cool before adding coolant to the reservoir.
Fuel Gauge
This gauge indicates the approximate amount of fuel remaining in the fuel tank.
Information
- The fuel tank capacity is given in chapter 8.
- The fuel gauge is supplemented by a low fuel warning light, which will illuminate when the fuel tank is nearly empty.
- On inclines or curves, the fuel gauge pointer may fluctuate or the low fuel warning light may come on earlier than usual due to the movement of fuel in the tank.
WARNING
Running out of fuel can expose vehicle occupants to danger. You must stop and obtain additional fuel as soon as possible after the warning light comes on or when the gauge indicator comes close to the “E (Empty)” level.
NOTICE
Avoid driving with an extremely low fuel level. Running out of fuel could cause the engine to misfire, damaging the catalytic converter.
Odometer
The odometer indicates the total distance that the vehicle has been driven and should be used to determine when periodic maintenance should be performed.
- Odometer range : 0 ~ 999999 miles or kilometers.
Outside temperature gauge
This gauge indicates the current outside air temperatures by 1°F (1°C).
- Temperature range : -40°F ~ 140°F (-40°C ~ 60°C)
The outside temperature on the display may not change immediately like a general thermometer to prevent the driver from being inattentive.
To change the temperature unit from °F to °C or °C to °F, it can be selected by one of the following methods :
- Go to User Settings Mode ➝ Other Features ➝ Temperature Unit.
- Press the AUTO button for 3 seconds while pressing the OFF button.(Automatic climate control system)
Both the temperature unit on the cluster LCD display and climate control screen will change.
Icy Road Warning Light
This warning light is to warn the driver the road may be icy.
When the following conditions occur, the warning light (including Outside Temperature Gauge) blinks 5 times and then illuminates, and also warning chime sounds 1 times.
- The temperature on the Outside Temperature Gauge is below approximately 40°F (4°C).
Information
If the icy road warning light appears while driving, you should drive more attentively and safely refraining from over-speeding, rapid acceleration, sudden braking or sharp turning, etc.
Automatic transmission shift indicator / Eco shift dual-clutch transmission shift indicator
This indicator displays which automatic transmission shift lever is selected.
- Park: P
- Reverse: R
- Neutral: N
- Drive: D
- Manual shift Mode
- Auto Transmission
1~6 (6-speed automatic transmission)
1~8 (8-speed automatic transmission) - Eco shift Dual Clutch Transmission: 1, 2, 3, 4, 5, 6, 7
- Auto Transmission
Shift indicator pop-up
The pop-up displays the current gear position selected for 2 seconds (P/R/N/D).
FAQs
Press the Settings button on the control panel and choose Display Settings to change the display’s brightness. You can then change the brightness to suit your tastes.
Indeed, you are able to alter the display’s layout. On the control panel, press the Settings button and choose Display Settings. You can then select from a variety of layout alternatives.
Make sure that both your phone and the car have Bluetooth enabled before you connect it for hands-free calling. After that, use the display to navigate to the Bluetooth settings and pair your phone by following the instructions.
You can access a number of features, including phone calls, audio controls, navigation, and vehicle settings, through the display.
To change the audio source, simply hit the Media button located on the control panel. From there, you have a variety of options to choose from, including Bluetooth audio, AM and FM radio, and more.
Yes, by hitting the Sound button on the control panel, you can change the equalizer settings. You can then adjust the sound profile to your preferred level.
By going to the car Info area in the display settings, you can see real-time vehicle information including tire pressure, fuel economy, and more.
Press the Nav button on the control panel to set a destination in the navigation system. Next, use the on screen keyboard to input the address or look for sites of interest.
Yes, by clicking the Climate button on the control panel, you can change the temperature and climate control settings. The fan speed, temperature, and airflow direction can all be changed from there.
Go to the Bluetooth settings on the screen and choose the add a new device option in order to pair a new device with Bluetooth. To finish pairing, adhere to the instructions.
Certainly, the rearview camera feed will instantly show up on the display to help with parking and reversing when you change into reverse.
It is possible to reset the display by holding down the power button for a few seconds until the screen becomes blank. After that, let go of the button and watch for the screen to restart.
You can view and even hear incoming text messages read aloud if your phone is linked via Bluetooth and supports text message integration.
Connect the car to a WiFi network and go to the Settings menu’s Software Update section to update the software on the display. To download and install any updates that are available, follow the instructions.
Try turning the car off and back on again to restart the system if an error message appears on the display.
Useful Links
View Full PDF: 2018 Hyundai Sonata Owner’s Manual| Auto User Guide
2023 Hyundai Sonata Specs, Price, Features, Milage (Brochure)