Hyundai Kona-EV 2023 Safe Exit Warning (SEW)
The 2023 Hyundai Kona-N features a novel feature called Safe Exit Warning (SEW), which protects passengers from possible dangers when getting out of the car. SEW deploys modern sensors to vigilantly monitor the Kona-N’s surroundings, assessing the safety of passengers opening their doors to escape. The technology ensures that passengers are aware of any possible hazards outside the car by instantly issuing visual and auditory alerts when it detects impediments or oncoming traffic. A crucial addition to the 2023 Hyundai Kona-N’s array of safety features, SEW can be adjusted to suit different sensitivity preferences and is adaptable, providing protection in confined spaces, urban and highway environments, and both. Its use promotes the safety of both road users and passengers.
2023 Hyundai KONA Specs, Price, Features, Milage (Brochure)
Safe Exit Warning (SEW)
After the vehicle stops, when an approaching vehicle from the rear area is detected after a passenger opens the door, Safe Exit Warning will warn the driver with a warning message and an audible warning to help prevent a collision.
CAUTION
Warning timing may vary depending on the speed of the approaching vehicle.
Detecting sensor
CAUTION For more details on the precautions of the rear corner radars, refer to “Blind-Spot Collision Warning (BCA)” section in this chapter.
Safe Exit Warning Settings Setting features
Safe Exit Warning
With the vehicle on, select ‘Driver on Safe Exit Warning and deselect to turn off the function.
Warning
The driver should always be aware of the surroundings. If ‘Safe Exit Warning’ is deselected, Safe Exit Warning cannot assist you.
Information
If the vehicle is restarted, Safe Exit Warning will maintain the last setting.
Warning Timing
With the vehicle on, select ‘Driver Settings menu to change the initial warning activation time for Safe Exit Warning. When the vehicle is first delivered, change the Warning Timing, the warning time of other Driver Assistance systems may change.
Warning Volume
With the vehicle on, select ‘Driver Warning. If you change the Warning Volume, the warning volume of other Driver Assistance systems may change.
CAUTION
- The setting of the Warning Timing and Warning Volume applies to all functions of Safe Exit Warning.
- Even though ‘Normal’ is selected for Warning Timing, if a vehicle approaches at high speed from the rear, the warning may seem late.
- Select ‘Late’ for Warning Timing when traffic is light and when driving speed is slow
Collision warning when exiting the vehicle
- When an approaching vehicle from the rear is detected at a moment a warning message will appear on the cluster, and an audible warning will sound.
- Safe Exit Warning will warn the driver when your vehicle’s speed is below 2 mph (3 km/h), and the speed of the approaching vehicle from the rear is above 3 mph (6 km/h).
Warning
Take the following precautions when using Safe Exit Warning:
- For your safety, only change the Settings after parking the vehicle at a safe location.
- If any other system’s warning message is displayed or an audible warning is generated, a Safe Exit Warning warning message may not be displayed and an audible warning may not be generated.
- You may not hear the warning sound of Safe Exit Warning if the surrounding is noisy.
- Safe Exit Warning does not operate in all situations and cannot prevent all collisions.
- Safe Exit Warning may warn the driver late or may not warn the driver depending on the road and driving conditions. Always check vehicle surroundings.
- The driver and passengers are responsible for accidents that occur while exiting the vehicle. Always check the surroundings before you exit the vehicle.
- Never deliberately operate Safe Exit Warning. Doing so may lead to serious injury or death.
- Safe Exit Warning does not operate if there is a problem with Blind-Spot Collision-Avoidance Assist.
The warning message of Blind-Spot Collision-Avoidance Assist will appear when:- Blind-Spot Collision-Avoidance Assist sensor or the sensor surrounding is polluted or covered
- Blind-Spot Collision-Avoidance Assist fails to warn passengers or falsely warns passengers
Information
After the vehicle is turned off, Safe Exit Warning operates approximately for 3 minutes but turns off immediately if the doors are locked.
Safe Exit Warning malfunction
When the Safe Exit Warning is not working properly, the ‘Check Blind-Spot Safety cluster for several seconds, and the master ( ) warning light will illuminate on the cluster. If the master warning light illuminates, have the vehicle inspected by an authorized HYUNDAI dealer.
When the outside rearview mirror warning light is not working properly, the ‘Check side view mirror warns the cluster for several seconds, and the master ( ) warning light will illuminate on the cluster. If the master warning light illuminates, have the vehicle inspected by an authorized HYUNDAI dealer.
Safe Exit Warning disabled
When the rear bumper around the rear corner radar or sensor is covered with foreign material, such as snow or rain, or installing a trailer or carrier, it can reduce the detecting performance and temporarily limit or disable Safe Exit Warning. If this occurs, the ‘Blind-Spot Safety message will appear on the cluster. Safe Exit Warning will operate normally when such foreign material or trailer, etc., is removed, and then the vehicle is restarted. If the Safe Exit Warning does not operate normally after it is removed, have the vehicle inspected by an authorized HYUNDAI dealer.
Warning
- Even though the warning message does not appear on the cluster, Safe Exit Warning may not properly operate.
- Safe Exit Warning may not properly operate in an area (for example, open terrain) where any objects are not detected right after the vehicle is turned on, or when the detecting sensor is blocked with foreign material right after the vehicle is turned on.
CAUTION
Turn off the Safe Exit Warning to install a trailer, carrier, or another attachment. Turn on Safe Exit Warning when finished.
Limitations of Safe Exit Warning
Safe Exit Warning may not operate properly, or it may operate unexpectedly under the following circumstances:
- Getting out of the vehicle where trees or grass are overgrown
- Getting out of the vehicle where the road is wet
- The approaching vehicle is very fast or very slow
Information
For more details on the limitations of the rear corner radar, refer to the “Blind-Spot Collision-Avoidance Assist (BCA)” section in this chapter.
Warning
- Safe Exit Warning may not operate properly if interfered by strong electromagnetic waves.
- Safe Exit Warning may not operate started, or the rear corner radars are initialized.
Information
This device complies with Part 15 of the FCC rules.
Operation is subject to the following three conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
- Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the device.
FAQ
Safe Exit Warning (SEW) is a safety feature designed to alert passengers when it detects oncoming traffic or obstacles as they attempt to exit the vehicle.
SEW uses sensors, such as radar or cameras, to monitor the vehicle’s surroundings and assess whether it is safe for passengers to open their doors and exit.
SEW provides warnings to passengers but does not physically prevent them from opening the doors; it is primarily an alert system.
SEW typically provides visual and audible alerts to passengers when it detects potential dangers outside the vehicle.
Many Kona-N models allow users to adjust the sensitivity of SEW through the vehicle’s settings menu.
SEW is primarily designed to detect oncoming traffic or obstacles, regardless of whether they are approaching from the front or rear of the vehicle.
SEW is designed to work at various speeds and in various driving conditions, including urban and highway driving.
In most Kona-N models, SEW can be turned on or off by the driver or passengers through the vehicle’s settings.
SEW may be available as a standard feature or as part of an optional package, depending on the trim level and options chosen for the Kona-N.
Yes, like many sensor-based systems, SEW can be affected by factors like dirty sensors or obstructions in its field of view. Keeping sensors clean is advisable for optimal performance.
SEW primarily focuses on detecting obstacles and oncoming traffic, regardless of weather conditions or road surfaces.
When SEW alerts are activated, passengers should refrain from opening the doors until the system determines it is safe to do so, helping to prevent potential accidents.
Yes, SEW can typically be used alongside other safety features, enhancing overall safety and passenger protection.
SEW typically covers both the driver’s and passenger’s side doors, offering protection to all vehicle occupants.
The range of SEW’s detection capabilities may vary depending on the specific sensors and system design but is generally designed to provide ample warning.
Useful Link
View Full User Guide: Hyundai Kona-N 2023 User Guide
Download Manuals: https://owners.hyundaiusa.com/us/en/resources/manuals-warranties.html
2023 Hyundai KONA Specs, Price, Features, Milage (Brochure)