Hyundai Kona 2023 Windshield Defrosting and Defogging
The Hyundai Kona Windshield Defrosting Guidelines for 2023 provide crucial information on how to operate the car’s defrosting system safely and effectively, ensuring maximum visibility and safety in ice and cold weather. In order to improve driver confidence and convenience throughout the winter, these instructions usually explain how to activate and use the defrosting functions and how to effectively remove frost and ice from the windshield. These guidelines, which emphasize user-friendly directions and maintenance suggestions, highlight Hyundai’s dedication to offering a dependable and efficient defrosting system that will make it easy for drivers to maneuver through inclement weather in the 2023 Kona.
2023 Hyundai KONA Specs, Price, Features, Milage (Brochure)
Windshield defrosting and defogging
WARNING
Windshield heating
Do not use the or position during cooling operation in extremely humid weather. The difference between the temperature of the outside air and that of the windshield could cause the outer surface of the windshield to fog up, causing loss of visibility. In this case, set the mode selection knob or button to the position and fan speed control knob or button to lower speed.
- For maximum defrost performance, set the temperature control knob to the highest temperature setting (rotated all the way to the right) and the fan speed control to the highest setting.
- If warm air to the floor is desired while defrosting or defogging, set the mode to the floor-defrost position.
- Before driving, clear all snow and ice from the windshield, rear window, side view mirrors, and all side windows.
- Clear all snow and ice from the hood and air inlet in the cowl grill to improve heater and defroster efficiency and to reduce the probability of fogging up inside of the windshield.
Automatic Climate Control System
To defog inside windshield
- Select desired fan speed.
- Select desired temperature.
- Press the defroster button ( ).
- The air-conditioning will turn on according to the detected ambient temperature, fresh mode and higher fan speed will be selected automatically.
If the air-conditioning, fresh mode and higher fan speed are not selected automatically, adjust the corresponding button or knob manually. If the position is selected, lower fan speed is controlled to higher fan speed.
To defrost outside windshield
- Set fan speed to the highest position.
- Set temperature to the extreme hot (HI) position.
- Press the defroster button ( ). The air-conditioning will turn on according to the detected ambient temperature and fresh mode will be selected automatically.
- If the position is selected, lower fan speed is controlled to higher fan speed.
Defogging Logic
To help reduce the probability of fogging up the inside of the windshield, the air intake or air conditioning are controlled automatically according to certain conditions such as or position. To cancel or return the defogging logic, do the following Manual climate control system
- Turn the ignition switch to the ON position.
- Select defroster mode ( ).
- The LED indicator on the air intake button will blink 3 times to indicate that the defogging logic has been disabled.
- Repeat the steps again to re-enable the defogging logic.
- If the battery has been discharged or disconnected, it resets to the defog logic status.
Automatic climate control system
Press the air intake control button at least 5 times within 3 seconds. The process should be completed within 10 seconds after the defroster mode
- Turn the ignition switch to the ON position.
- Press the defroster button ( ).
- While pressing the air conditioning button (A/C), press the air intake control button at least 5 times within 3 seconds.
The automatic climate control information screen will blink 3 times to indicate that the defogging logic has been disabled.
Repeat the steps again to re-enable the defogging logic. If the battery connector has been discharged or disconnected, it resets to the defog logic status.
Auto Defogging System
Auto defogging helps reduce the possibility of fogging up the inside of the windshield by automatically sensing the moisture on inside the windshield. The auto defogging system operates when the heater or air conditioning is on. When the Auto Defogging System operates, the indicator will illuminate. If a high amount of humidity is detected in the vehicle, the Auto Defogging System will be enabled.
The following steps will be performed automatically:
- Step 1) The A/C button will turn ON.
- Step 2) The air intake control will change to Fresh mode under low outside temperature.
- Step 3) The mode will be changed to defrost to direct airflow to the windshield.
- Step 4) The fan speed will be increased.
To cancel or reset the Auto Defogging System
Press the front windshield defroster button for 3 seconds when the ignition switch is in the ON position. When the Auto Defogging System is canceled, defrost button indicator will blink 3 times. When the Auto Defogging System is reset, defrost button indicator will blink 6 times without a signal.
Information
When the air conditioning is turned on by an auto-defogging system, if you try to turn off the air conditioning, the indicator will blink 3 times and the air conditioning will not be turned off. To maintain the effectiveness and efficiency of the Auto Defogging System, do not select Recirculation mode while the system is operating. When the Auto Defogging System is operating, the fan speed adjustment knob, the temperature adjustment knob, and the air intake control button are all disabled.
NOTICE
Do not remove the sensor cover located on the upper end of the driver side windshield glass. Damage to system parts could occur and may not be covered by your vehicle warranty.
Defroster
NOTICE
To prevent damage to the conductors bonded to the inside surface of the rear window, never use sharp instruments or window cleaners containing abrasives to clean the window.
Information
If you want to defrost and defog the front windshield, refer to “Windshield Defrosting and Defogging” in this chapter.
Rear window defroster
The defroster heats the window to remove frost, fog and thin ice from the interior and exterior of the rear window, while engine is running. To activate the rear window defroster, press the rear window defroster button located in the center facia switch panel. The indicator on the rear window defroster button illuminates when the defroster is ON. To turn off the defroster, press the rear window defroster button again.
Information
If there is heavy accumulation of snow on the rear window, brush it off before operating the rear defroster. The rear window defroster automatically turns off after approximately 20 minutes or when the ignition switch is in the LOCK/OFF position.
Outside mirror defroster (if equipped)
If your vehicle is equipped with the outside mirror defrosters, they will operate at the same time you turn on the rear window defroster.
FAQ
Typically, you can defrost the windshield by activating the defrost mode on the climate control system.
Most models come with a rear window defroster, and you can usually activate it through the climate control panel.
Defrosting is used to remove ice or frost from the windshield while defogging clears condensation or fogging on the interior of the windshield.
Some models may have settings or vents that help defog the side windows and mirrors. Check the user guide for details.
The time required for complete defrosting or defogging can vary depending on conditions, but the user guide may provide approximate times.
If you encounter issues, consult the user guide for troubleshooting tips, or contact a Hyundai dealership for assistance.
In many cases, you can manually adjust settings while the defrost or defog mode is active to fine-tune the process.
The air conditioning system can often help defrost or defog the windshield faster by removing moisture from the air.
Some vehicles have a setting that directs air to the windshield while driving to maintain visibility in adverse conditions.
Some models may offer remote start or smartphone apps that allow you to activate the defrosting or defogging remotely. Refer to the user guide for details.
The user guide may include safety recommendations, such as ensuring proper ventilation and not obstructing the windshield or vents.
The user guide may provide information on maintaining the systems, such as periodically cleaning the windshield to improve their effectiveness.
Some models may offer timer settings for the defrosting or defogging systems to start automatically at a specific time. Consult the user guide for details.
Windshield wipers often help remove moisture or frost from the windshield during the defrosting or defogging process.
The user guide may include information on testing the systems to ensure they are working as intended.
Useful Link
View Full User Guide: Hyundai Kona 2023 User Guide
Download Manuals: https://owners.hyundaiusa.com/us/en/resources/manuals-warranties.html
2023 Hyundai KONA Specs, Price, Features, Milage (Brochure)