2024 Indian Motorcycle Roadmaster Instrument Cluster System | How to use Display

2024 Indian Motorcycle Roadmaster Instrument Cluster System | How to use Display

Indian Motorcycle is happy to release the Roadmaster in 2024. It has a cutting-edge Instrument Cluster System that changes the way you ride. The instrument panel is the motorcycle’s nerve center. It combines cutting-edge technology with classic design in a way that looks great. With the system’s bright and easy-to-use screen, riders can quickly and easily access a wide range of information.
The Roadmaster’s Instrument Cluster System is made to make navigation easy, so users can quickly get to and understand information while they’re driving. Important numbers like speed, RPM, fuel level, and engine temperature are shown on the screen in a way that is clear and easy to read. Advanced features like navigation help, Bluetooth connection, and multimedia controls are also built right into the system, making it safer and more convenient.
Riders can use the easy-to-use controls on the handlebars to effectively explore the display. The touchscreen display makes it easy to make changes and quickly get to different features. The Roadmaster’s Instrument Cluster System makes it easy to change settings, get turn-by-turn directions, and control multimedia playing without sacrificing sophistication.
To sum up, the 2024 Indian Motorcycle Roadmaster Instrument Cluster System is a perfect mix of old-fashioned workmanship and modern technology. Its advanced features and easy-to-use interface are meant to give riders a smooth and enjoyable ride, turning every trip into an exciting and linked adventure.

INSTRUMENT CLUSTER (CRUISER MODELS)

The instrument cluster includes the speedometer, indicator lamps, and Multi-Function Display (MFD).

1. Speedometer
2. Indicator Lamps
3. Multi-Function Display

INSTRUMENT CLUSTER (BAGGERS AND TOURING MODELS)

1. Speedometer
2. Indicator Lamps
3. Multi-function Display r Tachometer

INDICATOR LAMPS

LAMP	INDICATES	CONDITION
	Cruise Control Status	Amber Lamp: Cruise control is enabled, but not set. When flashing, a cruise control-related fault exists. Green Lamp: Cruise control is set to the desired speed. Read the safety and operation procedures before using cruise control. See page 90.
	Turn Signals	One arrow flashes when the corresponding turn signal is activated. Both arrows flash when the hazard signal is activated. If there is a problem in the signal system, the lamps will flash at twice the normal rate.
	Vehicle Speed	When the standard mode is selected, speed displays in miles per hour.
		When metric mode is selected, speed displays in kilometers per hour.
	High Beam	The headlight switch is set to a high beam. This indicator will flash if there is a problem with the low or high-beam light.
	Neutral	The transmission is in neutral and the power switch is ON.
	Low Fuel	This lamp illuminates when approximately one gallon (3.8 liters) of fuel remains in the fuel tank. The LCD Display will switch into a Low Fuel Mileage Counter Mode to provide the rider with mileage tracking from the time the indicator was activated.
	Sidestand Light	The side stand light will turn on anytime the side stand is down.
	Chassis Fault	The alert symbol illuminates if a chassis fault occurs.
	Tire Pressure Monitoring System (TPMS)	The TPMS indicator illuminates if low tire pressure is detected. It will also illuminate along with the Low Battery Voltage indicator when TPMS battery power is low, requiring service.
	Low Oil Pressure	This lamp illuminates when oil pressure drops below a safe operating pressure while the engine is running. If this lamp illuminates while the engine is running above idle speed, turn the engine off as soon as safely possible and check the oil level. If the oil level is correct and the lamp remains on after the engine is restarted, turn the engine off immediately. See your dealer.
	Low Battery Voltage	This lamp illuminates when the battery voltage is low. Turn non-essential accessories off to conserve power. Make sure the charging system is operating properly. See page 157. This lamp also illuminates with the security light and/or power switch when the key fob battery is low, and with the TPMS lamp when the TPMS sensor battery is low.
	ABS Not Activated	The indicator remains on until the anti-lock system activates, which occurs when the vehicle speed exceeds 6 MPH (10 km/h). When the lamp is illuminated, the anti-lock brakes will not activate, but the conventional brake system will continue to operate normally.
	Check Engine	This lamp illuminates briefly when the power switch is turned ON. This indicates proper function. If this lamp illuminates while the engine is running, see an authorized dealer promptly. The light will remain on if the tilt sensor shuts down the engine. If abnormal sensor or engine operation is detected the light will remain on as long as the fault condition exists. Retrieve the error codes for diagnosis.
	Security	The security indicator illuminates when the security system is activated.

SPEEDOMETER
The speedometer displays forward vehicle speed in either miles per hour or kilometers per hour.

TACHOMETER
The tachometer displays engine speed in revolutions per minute (RPM). A red line on the face of the gauge indicates the maximum safe engine speed.
Excessive engine speed can cause engine damage or failure, which could result in serious injury or death. Do not allow engine speed to exceed the red line.

FUEL GAUGE DISPLAY
The fuel gauge displays the fuel level. For the most accurate reading, sit on the motorcycle and bring it to the upright position.
The segments of the fuel gauge q show the level of fuel in the fuel tank. When the last segment clears, a low fuel warning is activated. All segments including the fuel icon will flash. Refuel promptly.

MULTI-FUNCTION DISPLAY (MFD) MODES (IF EQUIPPED)
The power switch must be ON to access the MFD. Use the mode switches q to toggle through the modes of the multi-function display and to change settings in the display.

Available Modes:

• Odometer
• Trip Odometer 1
• Trip Odometer 2
• Clock
• Gear Position
• Engine Speed
• Average Fuel Economy
• DC Voltage
• Ambient Air Temperature
• Fuel Range
• Tire Pressure Monitoring System (TPMS)

ODOMETER
The odometer displays the total distance traveled.

TRIP ODOMETERS
The trip odometers (Trip 1 and Trip 2) display the total distance traveled since being reset. To reset a trip odometer, toggle to the trip odometer, then press and hold the LEFT-TOGGLE switch until the trip odometer resets to zero.

CLOCK

TIP
The clock must be reset any time the battery has been disconnected or discharged.

1. Use the LEFT-TOGGLE switch to toggle to the odometer display.
2. Press and hold the LEFT-TOGGLE switch until the hour segment flashes. Release the switch.
3. With the segment flashing, tap the LEFT-TOGGLE switch to advance to the desired setting.
4. Press and hold the LEFT-TOGGLE switch until the next segment flashes. Release the switch.
5. Repeat steps 3–4 twice to set the 10-minute and 1-minute segments. After completing the 1-minute segment, step 4 will save the new settings and exit the clock mode.

GEAR POSITION
Gear position displays at all times while the engine is running unless a fault occurs with the gear position sensor.

ENGINE SPEED
Engine speed displays in revolutions per minute (RPM).

AVERAGE FUEL ECONOMY
Average Fuel Economy displays the vehicle’s average fuel economy as of the last time the mode was reset. To reset, press and hold the left-hand trigger while viewing the fuel economy display.

DC VOLTAGE
The volt meter displays the battery voltage. If the engine is not running, approximate battery voltage displays. If the engine is running, approximate charging voltage displays.

TEMPERATURE
The temperature area displays ambient air temperature.

FUEL RANGE
The fuel range displays the distance the motorcycle can travel on the remaining fuel in the fuel tank.

NOTICE
For models equipped with Ride Command, ride modes can be selected on the display. The following procedure is for models not equipped with Ride Command.

To select a ride mode, do the following:

1. Press the right-hand trigger until Ride Md displays.
2. Hold down on the right-hand trigger. STND, SPORT, or TOUR will be displayed.
3. Using the right-hand trigger, toggle to change ride mode.
4. Press and hold the right-hand trigger to save the settings

NOTICE
Flashing ride mode means ride mode has been requested, but parameters to change the ride mode have not been met (throttle not in range, etc.)

DISPLAY UNITS (STANDARD/METRIC)
The display can be changed to display either standard or metric units of measurement.

	STANDARD DISPLAY	METRIC DISPLAY
Distance	Miles	Kilometers
Fuel	U.S. Gallons	I = Imperial Gallons	Liter = Liters
Temperature	Fahrenheit	Celsius
Time	12-Hour Clock	24-Hour Clock

1. Stop the engine.
2. Wait 10 seconds.
3. Press and hold the LEFT-TOGGLE switch while pressing the power switch.
4. When the display flashes the distance setting, tap the
   LEFT-TOGGLE switch to advance to the desired setting.
5. Press and hold the LEFT-TOGGLE switch to save the setting and advance to the next display option.
6. Repeat the procedure to change the remaining display settings.

DIAGNOSTIC FUNCTIONALITY
Certain conditions will cause an error message to display on the screen. If this occurs, please see your authorized dealer.

MESSAGE	LOCATION	INDICATES
ERROR	All	Checksum error (gauge malfunction)
LO (SPRINGFIELD)	DC Voltage Screen	Voltage remains below 11.0 volts for more than 10 seconds
OV (SPRINGFIELD)	DC Voltage Screen	Voltage remains above 15.0 volts for more than 10 seconds

ENGINE ERROR CODES
The error screen displays only when the CHECK ENGINE light is on or when it goes on and off during one ignition cycle. Error codes display only during the current ignition cycle. When the power switch is turned OFF, the code and message are lost but will reappear if the fault reoccurs after restarting the engine.

1. Error Code Number (0–9)
2. Suspect Parameter Number (SPN)
3. Failure Mode Indicator (FMI)

If the CHECK ENGINE indicator lamp illuminates, retrieve the error codes from the display. Error codes can also be viewed on the Ride Command display (if equipped). Codes will include a short description of the error and recommend action.

1. If the error codes are not displayed, use the LEFT-TOGGLE switch to toggle until “Ck ENG” displays on the main line of the display.
2. Press and hold the LEFT-TOGGLE switch to enter the diagnostics code menu.
3. Record the three numbers displayed in the gear position, clock, and odometer displays.
4. See an authorized dealer for code details and diagnosis.

LOW OIL PRESSURE DISPLAY
“LO OIL” displays under the following conditions.

CONDITION	INDICATES	ACTION REQUIRED
Engine oil pressure has dropped while the engine is running.	Oil pressure is below a safe operating pressure.	Stop the engine as soon as safely possible and check the oil level. If the oil level is sufficient, but “LO OIL” continues to display after restarting the engine, stop the engine immediately.

 

FAQs

Useful Link:

View Full PDF: 2024 Indian Motorcycle Roadmaster User Manual | Auto User Guide

2024 Indian Motorcycle Roadmaster Fuses and Fuse Box | Replacing a Blown Fuse