2024 Indian Motorcycle Scout Bobber Instrument Cluster Dashboard | How to use
The 2024 Indian Motorcycle Scout Bobber has an ultramodern Instrument Cluster Dashboard that combines usefulness with modern style in a way that looks great. The motorcycle’s nerve center is the dashboard, which shows riders important information at a look. The instrument cluster is meant to improve the general riding experience and has an easy-to-use interface. It shows important things like speed, fuel level, and gear position using both analog and digital screens, so riders can stay informed and keep their eyes on the road ahead. The easy-to-use controls make it simple to switch between the different features, letting riders connect with the motorcycle’s technology without any problems. The 2024 Indian Motorcycle Scout Bobber Instrument Cluster Dashboard is the epitome of style and usefulness, and it represents the spirit of innovation in the motorcycle world. You can easily learn how to use it, which lets users easily use technology while enjoying the thrill of the open road.
INSTRUMENT CLUSTER
The instrument cluster includes the speedometer, indicator lamps, and Multi-Function Display (MFD).
- Speedometer
- Indicator Lamps
- Multi-Function Display (MFD)
SPEEDOMETER
The speedometer displays forward vehicle speed in either miles per hour or kilometers per hour.
INDICATOR LAMPS
LAMP | INDICATES | CONDITION |
High Beam | The headlight switch is set to a high beam. This indicator will flash if there is a problem with the low or high-beam light. | |
Chassis Fault | The alert symbol illuminates if a chassis fault occurs. | |
|
Turn Signals | One arrow flashes when the corresponding turn signal is activated. Both arrows flash when the hazard signal is activated. If there is a problem in the signal system, the lamps will flash at twice the normal rate. |
|
ABS Not Activated | The indicator remains on until the anti-lock system activates, which occurs when vehicle speed exceeds 6 mph (10 km/h). When the lamp is illuminated, the anti-lock brakes will not |
activate, but the conventional brake system will continue to operate normally. | ||
Neutral | The transmission is in neutral and the power switch is ON. | |
Low Fuel | This lamp illuminates when about 0.5 gal (1.9 L) of fuel remains in the tank. | |
|
Check Engine | If this lamp illuminates while the engine is running, see your dealer promptly. The light will remain on if the tilt sensor shuts down the engine. If abnormal sensor or engine operation is detected the light will remain on as long as the fault condition exists.
Retrieve the error codes for diagnosis. See page 36. |
Engine Overheat | The engine overheat light will illuminate when the engine temperature exceeds the normal operating temperature. | |
|
Vehicle Speed | When the standard mode is selected, speed displays in miles per hour. |
When metric mode is selected, speed displays in kilometers per hour. |
MFD TELL-TALES
LAMP | INDICATES | CONDITION | |
|
Low Oil Pressure | The Low Oil Pressure lamp illuminates when oil pressure drops below a safe operating pressure while the engine is running. If this lamp illuminates while the engine is running above idle speed, turn the engine off as soon as safely possible and check the oil level. If the oil level is correct and the lamp remains on after the engine is restarted, turn the engine off immediately. See your dealer. | |
|
Battery Voltage | The Battery Voltage lamp illuminates if high or low battery voltage is detected, or if there is a charging system fault. Turn non-essential accessories off to conserve power. Make sure the charging system is operating properly. See page 121. | |
Vehicle Speed | When the standard mode is selected, speed displays in miles per hour. | ||
When metric mode is selected, speed displays in kilometers per hour. |
MULTI-FUNCTION DISPLAY MODES
With the ignition switch on, use the right-hand trigger switch to toggle through the modes of the multi-function display and to change settings in the display.
The following display modes are available:
- Odometer
- Trip Odometer
- Engine Speed
- Gear Indicator
- Battery Voltage
- Engine Error Codes
ODOMETER
The odometer displays the total distance traveled.
TRIP ODOMETER
The trip odometer displays the total distance traveled since being reset. To reset, toggle to the trip odometer, then press and hold the MODE button until the trip odometer resets to zero.
ENGINE SPEED
Engine speed displays in revolutions per minute (RPM).
GEAR INDICATOR
The vehicle’s current gear position is displayed on the MFD.
BATTERY VOLTAGE
Battery voltage displays real-time, regulated charge voltage supplied to the battery. The voltage level may fluctuate depending on the electrical load and engine RPM.
DISPLAY UNITS (STANDARD / METRIC)
The display can be changed to display either standard or metric units of measurement
STANDARD DISPLAY | METRIC DISPLAY | |
Distance | Miles | Kilometers |
Temperature | Fahrenheit | Celsius |
Time | 12-Hour Clock | 24-Hour Clock |
- Turn the ignition off.
- Wait 10 seconds.
- Press and hold the left-hand trigger switch while turning the key to the ON or PARK position.
- When the display flashes the distance setting, tap the left-hand trigger switch to advance to the desired setting.
- Press and hold the left-hand trigger switch to save the setting and advance to the next display option.
- Repeat the procedure to change the remaining display settings.
CLOCK
NOTICE
The clock must be reset any time the battery has been disconnected or discharged.
- Use the left-hand trigger switch to toggle to the odometer display.
- Press and hold the left-hand trigger switch until the hour segment flashes. Release the switch.
- With the segment flashing, tap the left-hand trigger switch to advance to the desired setting.
- Press and hold the left-hand trigger switch until the next segment flashes. Release the switch.
- Repeat steps 3 and 4 twice to set the 10-minute and 1-minute segments. After completing the 1-minute segment, step 4 will save the new settings and exit the clock mode.
ENGINE ERROR CODES
The error screen displays only when the CHECK ENGINE light is on or when it goes on and off during one ignition cycle. Error codes display only during the current ignition cycle. When the ignition switch is turned OFF, the code and message are lost but will reappear if the fault reoccurs after restarting the engine.
If the CHECK ENGINE indicator lamp illuminates, retrieve the error codes from the display.
- If the error codes are not displayed, use the left-hand trigger switch to toggle until “Ck ENG” displays on the main line of the display.
- Press and hold the left-hand trigger switch to enter the diagnostics code menu.
- Record the three numbers displayed in the gear position, clock, and odometer displays.
- See an authorized dealer for code details and diagnosis.
- Error Code Number (0–9)
- Suspect Parameter Number (SPN)
- Failure Mode Indicator (FMI)
DIAGNOSTIC FUNCTIONALITY
Certain conditions will cause the battery indicator to illuminate and an error message to display on the screen. If this occurs, please see your authorized dealer.
MESSAGE | LOCATION | INDICATES |
LO | DC Voltage Screen | Voltage remains below 11.0 volts for more than 10 seconds |
OV | DC Voltage Screen | Voltage remains above 15.0 volts for more than 10 seconds |
ERROR | All | Checksum error (gauge malfunction) |
OVER TEMPERATURE DISPLAY AND WARNING INDICATOR
If the engine coolant temperature approaches unsafe operating conditions while the engine is running, the engine overheat indicator will illuminate and the current engine coolant temperature will display on the MFD. Stop the engine as soon as safely possible. Check the coolant level. Check the radiator for debris. Check cooling fan operation. If the warning continues to display after restarting the engine, stop the engine immediately.
FAQs
The 2024 Indian Motorcycle Scout Bobber instrument cluster dashboard includes a speedometer, tachometer, fuel gauge, odometer, trip meter, and various indicator lights.
Typically, you can use a button on the handlebars to toggle between different information screens on the instrument cluster.
The tachometer on the instrument cluster displays the engine’s RPM (revolutions per minute), providing information about the engine’s performance.
Many modern motorcycles include a gear position indicator, but it’s essential to check the specific model’s features to confirm if the 2024 Indian Motorcycle Scout Bobber has this.
Typically, there’s a button on the instrument cluster that allows you to reset the trip meter.
The instrument cluster includes warning lights for various functions such as low fuel, high beam, turn signals, engine check, and more.
Some motorcycles allow limited customization of display settings.
Some motorcycles have maintenance reminder features to alert riders of scheduled service intervals.
Fuel gauges are generally accurate, but factors like riding conditions and bike position can affect readings. It’s advisable to rely on the gauge and monitor fuel levels regularly.
See the service manual for information on how to access and interpret diagnostic trouble codes on the Scout Bobber instrument cluster.
Some motorcycles offer adjustable brightness or a night mode for better visibility in different lighting conditions.
Warning lights and symbols on the instrument cluster typically illuminate to indicate low oil pressure or other critical issues. Familiarize yourself with the symbols in the manual.
Some modern motorcycles offer smartphone connectivity for features like navigation or music control.
In case of a malfunction, refer to the troubleshooting section in the owner’s manual. It may guide on common issues and solutions.
The instrument cluster may not provide specific guidance, but it’s essential to follow the manufacturer’s recommendations during the break-in period.
Useful Link:
View Full PDF: 2024 Indian Motorcycle Scout Bobber User Manual | Auto User Guide
2024 Indian Motorcycle Scout Bobber Fuses and Fuse Box | How to fix a Blown Fuse