2024 Indian Motorcycle Scout Display Instrument Cluster | How to use

2024 Indian Motorcycle Scout Display Instrument Cluster | How to use

The 2024 Indian Motorcycle Scout has a state-of-the-art Display Instrument Cluster, which is a big step forward in technology that focuses on the user. This innovative group of instruments is the brains of the motorbike. It gives riders instant access to a lot of useful data. The high-resolution screen has a clear and easy-to-use interface that makes it easy for users to get to important information. The instrument panel shows a lot of information that makes riding better, from speed and fuel levels to navigation directions and engine diagnostics. Easy-to-use settings make it easy to switch between the different features, so riders can keep their eyes on the road and stay informed. The 2024 Indian Motorcycle Scout Display Instrument Cluster comes with cutting-edge technology and is designed with the user in mind. It raises the bar for ease of use and communication in motorcycles.

INSTRUMENT CLUSTER

The instrument cluster includes the speedometer, indicator lamps, and Multi-Function Display (MFD).

1. Speedometer
2. Indicator Lamps
3. Multi-Function Display (MFD)

SPEEDOMETER
The speedometer displays forward vehicle speed in either miles per hour or kilometers per hour.
INDICATOR LAMPS

LAMP	INDICATES	CONDITION
	High Beam	The headlight switch is set to a high beam. This indicator will flash if there is a problem with the low or high-beam light.
	Chassis Fault	The alert symbol illuminates if a chassis fault occurs.
	Turn Signals	One arrow flashes when the corresponding turn signal is activated. Both arrows flash when the hazard signal is activated. If there is a problem in the signal system, the lamps will flash at twice the normal rate.
	ABS Not Activated	The indicator remains on until the anti-lock system activates, which occurs when vehicle speed exceeds 6 mph (10 km/h). When the lamp is illuminated, the anti-lock brakes will not
		activate, but the conventional brake system will continue to operate normally.
	Neutral	The transmission is in neutral and the power switch is ON.
	Low Fuel	This lamp illuminates when about 0.5 gal (1.9 L) of fuel remains in the tank.
	Check Engine	If this lamp illuminates while the engine is running, see your dealer promptly. The light will remain on if the tilt sensor shuts down the engine. If abnormal sensor or engine operation is detected the light will remain on as long as the fault condition exists.  Retrieve the error codes for diagnosis.
	Engine Overheat	The engine overheat light will illuminate when the engine temperature exceeds the normal operating temperature.
	Vehicle Speed	When the standard mode is selected, speed displays in miles per hour.
		When metric mode is selected, speed displays in kilometers per hour.

MFD TELL-TALES

LAMP	INDICATES	CONDITION
	Low Oil Pressure	The Low Oil Pressure lamp illuminates when oil pressure drops below a safe operating pressure while the engine is running. If this lamp illuminates while the engine is running above idle speed, turn the engine off as soon as safely possible and check the oil level. If the oil level is correct and the lamp remains on after the engine is restarted, turn the engine off immediately. See your dealer.
	Battery Voltage	The Battery Voltage lamp illuminates if high or low battery voltage is detected, or if there is a charging system fault. Turn non-essential accessories off to conserve power. Make sure the charging system is operating properly. See page 121.
	Vehicle Speed	When the standard mode is selected, speed displays in miles per hour.
		When metric mode is selected, speed displays in kilometers per hour.

MULTI-FUNCTION DISPLAY MODES
With the ignition switch on, use the right-hand trigger switch to toggle through the modes of the multi-function display and to change settings in the display.
The following display modes are available:

• Odometer
• Trip Odometer
• Engine Speed
• Gear Indicator
• Battery Voltage
• Engine Error Codes

ODOMETER
The odometer displays the total distance traveled.

TRIP ODOMETER
The trip odometer displays the total distance traveled since being reset. To reset, toggle to the trip odometer, then press and hold the MODE button until the trip odometer resets to zero.

ENGINE SPEED
Engine speed displays in revolutions per minute (RPM).

GEAR INDICATOR
The vehicle’s current gear position is displayed on the MFD.

BATTERY VOLTAGE
Battery voltage displays real-time, regulated charge voltage supplied to the battery. The voltage level may fluctuate depending on the electrical load and engine RPM.

DISPLAY UNITS (STANDARD / METRIC)
The display can be changed to display either standard or metric units of measurement

	STANDARD DISPLAY	METRIC DISPLAY
Distance	Miles	Kilometres
Temperature	Fahrenheit	Celsius
Time	12-Hour Clock	24-Hour Clock

1. Turn the ignition off.
2. Wait 10 seconds.
3. Press and hold the left-hand trigger switch while turning the key to the ON or PARK position.
4. When the display flashes the distance setting, tap the left-hand trigger switch to advance to the desired setting.
5. Press and hold the left-hand trigger switch to save the setting and advance to the next display option.
6. Repeat the procedure to change the remaining display settings.

CLOCK

1. Use the left-hand trigger switch to toggle to the odometer display.
2. Press and hold the left-hand trigger switch until the hour segment flashes. Release the switch.
3. With the segment flashing, tap the left-hand trigger switch to advance to the desired setting.
4. Press and hold the left-hand trigger switch until the next segment flashes. Release the switch.
5. Repeat steps 3 and 4 twice to set the 10-minute and 1-minute segments. After completing the 1-minute segment, step 4 will save the new settings and exit the clock mode.

ENGINE ERROR CODES
The error screen displays only when the CHECK ENGINE light is on or when it goes on and off during one ignition cycle. Error codes display only during the current ignition cycle. When the ignition switch is turned OFF, the code and message are lost but will reappear if the fault reoccurs after restarting the engine.
If the CHECK ENGINE indicator lamp illuminates, retrieve the error codes from the display.

1. If the error codes are not displayed, use the left-hand trigger switch to toggle until “Ck ENG” displays on the main line of the display.
2. Press and hold the left-hand trigger switch to enter the diagnostics code menu.
3. Record the three numbers displayed in the gear position, clock, and odometer displays.
4. See an authorized dealer for code details and diagnosis.

1. Error Code Number (0–9)
2. Suspect Parameter Number (SPN)
3. Failure Mode Indicator (FMI)

DIAGNOSTIC FUNCTIONALITY
Certain conditions will cause the battery indicator to illuminate and an error message to display on the screen. If this occurs, please see your authorized dealer.

MESSAGE	LOCATION	INDICATES
LO	DC Voltage Screen	Voltage remains below 11.0 volts for more than 10 seconds
OV	DC Voltage Screen	Voltage remains above 15.0 volts for more than 10 seconds
ERROR	All	Checksum error (gauge malfunction)

OVER TEMPERATURE DISPLAY AND WARNING INDICATOR
If the engine coolant temperature approaches unsafe operating conditions while the engine is running, the engine overheat indicator will illuminate and the current engine coolant temperature will display on the MFD. Stop the engine as soon as safely possible. Check the coolant level. Check the radiator for debris. Check cooling fan operation. If the warning continues to display after restarting the engine, stop the engine immediately.

 

FAQs

Useful Link:

View Full PDF: 2024 Indian Motorcycle Scout Owner’s Manual | Auto User Guide

2024 Indian Motorcycle Scout Fuses and Fuse Box | Replacing a blown fuse