2024 Indian Motorcycle Springfield Owner’s Manual
In a contemporary design, the 2024 Indian Motorcycle Springfield captures the essence of vintage American touring. This legendary touring motorbike expertly combines horsepower and modern technology with classic styling. Long-distance drivers will find the Springfield’s powerful V-twin engine to be both comfortable and powerful. For riders looking for adventure on the open road, it’s the perfect option thanks to its roomy and comfortable riding position. The 2024 Indian Motorcycle Springfield delivers a premium touring experience that honours its illustrious past while embracing the most recent advancements in motorcycling, making it ideal for both experienced touring enthusiasts and riders searching for a versatile and dependable companion.
RIDE COMMAND BUTTONS
RIDER SCREENS
The Rider Screens are customizable and provide unique access to ride data, vehicle status, and vehicle information. The Rider Screens also provide easy access to other often-used features, such as Audio controls, Bluetooth® features, and Maps.
NAVIGATION
Press the Navigation button to access Ride Command navigation features (if equipped), find directions, and look up addresses, gas stations, and other points of interest.
RIDE COMMAND HAND CONTROLS
MEDIA SWITCH
Use the 5–way media switch q to do the following:
- Press the centre to mute
- Press up/down to increase/decrease volume.
- Press left/right to move to the previous/next track.
- Long press to activate Push to Talk.
SELECT SWITCH
Use the 3–way select switch w to do the following:
- Press up and down to navigate the display screen.
- Press centre to select.
- Long press to drop down settings panel.
TRIGGER SWITCHES
There are trigger switches located on the reverse side of both the right and left e switch cubes.
Use the trigger switches to do the following:
- Press the right trigger switch to confirm selection.
- Press the left trigger switch to back out of menu screens.
RIDE COMMAND RIDE MODES
You can choose between three ride modes, Tour, Standard, or Sport for an experience customized to your riding style. The throttle map for each ride mode was designed with a specific application in mind, resulting in one motorcycle with three distinct personalities.
NOTICE
For the ride mode to change the throttle must be fully disengaged. If you change the ride mode while the throttle is engaged, a spinning icon will appear indicating that the ride mode has not yet changed. Once the throttle is disengaged the icon will disappear and the ride mode will change.
TOUR
Tour mode provides a smoother throttle response ideal for riding with a passenger or for long touring rides.
STANDARD
Standard mode features a crisp throttle response and well-balanced power delivery for responsive passing power and predictable, slow-speed handling.
SPORT
Sport mode is designed for situations when instant response is needed. Sport mode quickens the throttle response and has a more aggressive power delivery for increased acceleration.
RIDE COMMAND SETTINGS
From the Settings Menu you can view important details about your vehicle and personalize your touchscreen display. The settings menu is comprised of four categories: Information, General, Time, and Vehicle.
GENERAL INFORMATION
From the Information settings menu you can view the following:
- Vehicle Identification Number (VIN)
- Mileage
- Installed Software Version
- Oil Change Interval
GENERAL SETTINGS
From the General settings menu you can do the following:
- Themes (Day/Night/Auto)
- Manage Bluetooth® Devices
- Change the Language
- Set the Speed Units of Measure (MPH or KPH)
- Set the Temperature Units (F or C)
- Update Software
- Update Maps
CLOCK
From the Time Settings you can do the following:
- Set the Time Format (12 hour or 24 hour)
- Enable GPS Time (automatically sets the time to the time zone you are currently in)
- Set Time (if GPS Time is not enabled)
NOTICE
The clock is sourced from the GPS chip and periodically requires GPS lock to function correctly.
VEHICLE INFORMATION
From the Vehicle Settings you can do the following:
- Oil Life/ Service Reset
- Access Vehicle Diagnostics
BLUETOOTH® PAIRING
The INDIAN MOTORCYCLE Ride Command touchscreen display
can be connected to a smart-phone and a headset simultaneously.
To pair a device, do the following:
- From the Bluetooth® Devices settings screen, the Phone screen, or the Music screen, tap on the Add Device button to bring up the pairing prompt.
- Put your Bluetooth® device into pairing mode.
- Select the name of the device you want to pair from the touchscreen display to finish the pairing process.
- Confirm pairing (if applicable). Depending on the device you are pairing to the display you may be prompted to confirm pairing.
CONNECTED SERVICES
Certain INDIAN MOTORCYCLE Ride Command equipped models include connected services, provided for a limited time starting on the date of purchase. The features include real time traffic, weather, and enhanced destination search capabilities. To check your connected service status and to renew, go to: http://ridecommand.indianmotorcycle.com.
UPDATE SOFTWARE
For the latest software for INDIAN MOTORCYCLE Ride Command,
go to: https://ridecommand.indianmotorcycle.com.
The display software can be updated by connecting a USB stick containing the latest software version to the USB port located inside the visor cargo compartment. The Update Software menu in Settings will list any available updates on the USB stick. Choose the correct version and wait for the update to complete before removing the USB stick. The touchscreen display will automatically restart when software is updated.
OVER THE AIR UPDATES NOTICE
Over the air updates are only available on models equipped with
a cell modem. If your model is equipped with a cell modem, the motorcycle will automatically download software updates from the cloud when the motorcycle is powered on and a cell modem connection is available. All downloads occur in the background and can be resumed if the connection is interrupted or if the motorcycle is turned off.
HOW TO INSTALL SOFTWARE
Once new software has been downloaded to your display, you will
be prompted with a notification.
To install new software, do the following:
- Navigate to the General Settings tab in the Settings menu.
- Press the “Install” button.
NOTICE
The following conditions must be met for the installation to initiate: the battery voltage must be greater than 12.5 V, the wheel speed must be at 0 mph, and the RPMs must equal 0. The display will restart after the installation has successfully completed. Critical updates will be installed automatically. A notification will display once the update is compete. - After the update had been completed, release notes will be provided on the software update screen.
UPDATE MAPS
For the latest maps for Ride Command, go to https://ridecommand.indianmotorcycle.com.
NOTICE
The display will automatically restart after a software and map
update. For map updates, a 32GB or greater USB drive formatted to exFAT® is required.
USB PORT
The USB Port q makes it easy to power devices, such as phones,
audio sources, or GPS units, in addition to allowing you to stream
music through the LCD display to your Bluetooth® headset. On
models equipped with a INDIAN MOTORCYCLE Ride Command display, the USB port is also used to update the display software.
For the latest software, go to https://ridecommand.indianmotorcycle.com
IMPORTANT
Due to harsh riding environments, INDIAN MOTORCYCLE recommends using a USB device with retention features.
REAR CYLINDER DEACTIVATION
Designed as an aid to reduce engine and exhaust heat to the rider, Rear Cylinder Deactivation turns off the rear cylinder when the engine gets hot. The following condition must be met for Rear Cylinder Deactivation to be enabled.
- Engine must be up to operating temperature
- Ambient Temperature must exceed 15 C
- Engine speed must remain below 1000 rpm
- Gear position must be 1, 2, or N
- Throttle must be in the closed position (0% throttle)
For models equipped with Ride Command, Rear Cylinder Deactivation can be turned off by accessing the settings menu in the drop-down from the top of the screen. Cylinder Deactivation controls are in the Vehicle Settings menu. When Rear Cylinder Deactivation is functioning, an icon will illuminate at the top of the Ride Command display screen.
For models not equipped with Ride Command, do the following to disable Rear Cylinder Deactivation:
- Press the right-hand trigger until “CYLdeAC” displays.
- Hold down the right-hand trigger. “CD ON” or “CD OFF” will display.
- Toggle to turn cylinder deactivation on or off. Press and hold hand right-hand trigger to save settings.
- CYLdeAC ON: rear cylinder can deactivate
- CYLdeAC OFF: rear cylinder cannot deactivate
HEATED GRIPS HEAT LEVEL SETTING (IF EQUIPPED)
The heated grips heat level displays momentarily after changing the heat level. For models equipped with Ride Command, a brief pop-up will appear on the touchscreen display when heat level is changed. To change the heated grips level on the Ride Command display, open the Control Panel and tap to adjust the temperature either up, down, or off. The heated grips will need to be adjusted with the physical button the first time after a Ride Command software update for the display to recognize the heated grips.
MISFIRE DETECTION
If a misfire is detected, the check engine indicator lamp will begin to flash and fuel will be cut to the affected cylinder(s). The check engine indicator lamp will continue to flash until the ignition switch has been moved to the off position. Restarting the engine will clear the flashing indicator and restore fuel to both cylinders. If another misfire occurs, the check engine indicator lamp will resume flashing and fuel will once again be cut to the affected cylinder(s). After the 3rd misfire, P0314 misfire fault is determined & set, the check engine light will remain on and fuel will be cut to the affected cylinder(s). If this occurs, your INDIAN MOTORCYCLE dealer can assist.
FAQs
The 2024 Indian Motorcycle Springfield is a touring motorcycle that combines classic design with modern performance.
The 2024 Springfield maintains the classic Springfield styling while incorporating modern technology and refinements.
It features a potent V-twin engine known for its power delivery and distinctive exhaust note.
Exact figures may vary by model, but it typically produces around 100-110 horsepower and ample torque for touring.
Yes, it’s specifically designed for comfortable and extended rides, making it an ideal choice for touring enthusiasts.
The Springfield appeals to riders who value touring comfort, classic aesthetics, and powerful performance.
Yes, Indian Motorcycle offers a range of touring accessories, and there’s a growing aftermarket community for customization.
Indian Motorcycle typically offers various classic and contemporary colours, though availability may vary by region.
It usually features a spacious and comfortable two-up seat with ample passenger accommodations.
Yes, it often includes modern features such as advanced infotainment systems, rider-assist features, and connectivity options.
Despite its size, the Springfield is designed for excellent stability and control, even during long rides.
Specific mileage may vary, but Springfield typically offers reasonable fuel efficiency for a touring motorcycle.
Yes, Indian Motorcycle typically provides warranty coverage for their motorcycles, but details may differ by region.
While it’s suitable for riders of all experience levels, it’s often favoured by riders with touring experience.
The 2024 Indian Motorcycle Springfield has a starting price of $22,999.
Useful Link
Download Manuals: https://www.indianmotorcycle.com/en-us/owners-manuals/