2022 Infiniti Q50 Lights Installation Guide
A luxurious vehicle with cutting-edge technologies, including its lighting system, is the 2022 Infiniti Q50. It’s crucial to install lighting on your Q50 properly for safety, practicality, and aesthetic reasons. This installation guide is your go-to resource whether you want to improve visibility with updated headlights, personalize the inside with ambient lighting, or add chic external lighting elements. The installation process for various lighting components is covered step-by-step in the 2022 Infiniti Q50 Lights Installation Guide. Each section of the manual offers thorough instructions, advice, and safety measures to guarantee a successful installation, from headlights and taillights to LED strips and interior lighting. This tutorial gives you the knowledge and confidence to illuminate your Q50 in elegance and safety, regardless of whether you’re an experienced DIY enthusiast or a novice at automotive modification.
INTERIOR LIGHTS
MAP LIGHTS
Push the button as illustrated to turn the light on or off.
CONSOLE LIGHT (if so equipped)
The console light will turn on whenever the front parking lights or headlights are illuminated.
PERSONAL LIGHTS
Push the button as illustrated to turn the light on or off.
INTERIOR LIGHT CONTROL SWITCH
- ON switch
When the ON switch is pushed in, the map lights and rear personal lights will illuminate. When the switch is pushed off, the lights will not illuminate, regardless of the condition. - DOOR OFF switch
When the DOOR OFF switch is not pushed in, the map lights and rear personal lights will illuminate under the following conditions:
- ignition switch is switched to the OFF position
- remain on for about 15 seconds.
- doors are unlocked by pushing the UNLOCK button on the Intelligent Key or one touch unlock sensor with the ignition switch in the LOCK position
- remain on for about 15 seconds.
- any door is opened and then closed with the ignition switch in the LOCK position
- remain on for about 15 seconds.
- any door is opened
- remain on while the door is opened.
When the door is closed, the lights go off.
- remain on while the door is opened.
- When the DOOR OFF switch is pushed in, the map and rear personal lights will not illuminate under the above condition. The map and rear personal lights can be turned on only with the ON switch .
The lights will also turn off after a period of time when the lights remain illuminated after the ignition switch has been pushed to the OFF or LOCK position to prevent the battery from becoming discharged. - When [Lamp ON when Door Unlocks] is set to OFF on the lower display (see the INFINITI InTouchTM Owner’s Manual), the lights will illuminate under the following condition:
- any door is opened with the ignition switch in any position
- remain on while the door is opened.
When the door is closed, the lights go off.
- remain on while the door is opened.
CAUTION
Do not use for extended periods of time with the engine stopped. This could result in a discharged battery.
VANITY MIRROR LIGHTS
- The light on the vanity mirror will turn on when the cover on the vanity mirror is opened.
- When the cover is closed, the light will turn off.
- The lights will also turn off after a period of time when the lights remain illuminated to prevent the battery from becoming dis-charged.
TRUNK LIGHT
- The light illuminates when the trunk lid is opened. When the trunk lid is closed, the light will turn off.
- The light will also turn off after a period of time when the light remains illuminated after the ignition switch has been pushed to the OFF or LOCK position to prevent the battery from becoming discharged.
COURTESY LIGHT
- When the doors are unlocked by pushing the UNLOCK button on the Intelligent Key or touching the one touch unlock sensor with the ignition switch in the LOCK position, the courtesy light will illuminate.
- To activate or deactivate the courtesy light, set [Lamp ON when Door Unlocks] on the lower display. See the INFINITI InTouchTM Owner’s Manual.
FAQs
Yes, you can add aftermarket headlights as long as they abide by all applicable safety and legal regulations.
For detailed instructions on changing headlight bulbs, refer to your owner’s manual; in most cases, this entails entering the engine compartment.
Yes, LED conversion kits for more brightness and efficiency are available, but be sure they work with your car.
It is possible to install aftermarket fog lights, but you could need more wiring and a different switch.
A manual adjustment screw that is situated close to the headlights can be used to change the height of the headlight beam.
Yes, ambient lighting can be added to improve the interior mood. Some kits are made to be simple to install.
LED strip mounting, measurement, and wiring are all part of the procedure. Carefully adhere to the manufacturer’s directions.
Check your local laws first, as some places have limits on the type and location of outdoor lighting.
Following the owner’s manual’s instructions, you can access the taillight assembly from inside the trunk and change the bulbs as necessary.
Yes, you can add LED accent lighting as long as it doesn’t obstruct your car’s lighting system and complies with local regulations.
Commonly sufficient hand tools include screwdrivers, pliers, and wire strippers. Advanced installations can need particular tools.
Yes, you can add DRLs. However, make sure they are correctly wired and adhere to local laws.
Access the license plate lights from the back of the car and change the bulbs as necessary by following the instructions in the owner’s manual.
Adaptive lighting characteristics are available in certain aftermarket headlights, but compatibility and appropriate installation are essential.
Professional installation is advised for complex installations, especially those involving electrical wiring, to ensure operation and safety.
Useful Link
View Full PDF : 2022 Infiniti Q50 User Manual | Auto User Guide
Warning and Indicator Lights: 2022 Infiniti Q50 Warning and Indicator Lights