Auto User Guide

Infiniti QX80 2019 User Manual

Infiniti-logo

Infiniti QX80 2019 User Manual

The 2020 Infiniti QX80 is a luxurious and commanding full-size SUV that combines style, speed, and high-tech features in a way that no other vehicle can. The QX80’s bold and unique appearance makes it stand out on the road and gives it a sense of power and sophistication. Inside the luxurious cabin, you’ll find a world of refined luxury and ease, with high-quality materials, fine craftsmanship, and enough room for up to eight people to sit. The QX80 has a strong V8 engine that puts out a lot of power, making it a thrilling and powerful car to drive. With its easy-to-use infotainment system and set of driver-assist technologies, the QX80 keeps you connected and safe while you’re on the road. The QX80 has a smooth ride, a lot of room for cargo, and the option of four-wheel drive, so it can be used for both driving in the city and going off-road. The 2020 Infiniti QX80 is the perfect combination of luxury and performance in a full-size SUV. Its bold style, cutting-edge technology, and unbeatable comfort will take your driving experience to a whole new level.

SEAT BELT WARNING LIGHT

Both the driver’s and passenger’s front seats are equipped with a seat belt warning light. The warning light, located on the instrument panel, will show the status of the driver and passenger seat belt.

NOTE:
The front passenger seat belt warning light will not light up if the seat is not occupied.
For additional information, refer to “Warning lights, indicator lights, and audible reminders” in the “Instruments and controls” section of this manual.

PREGNANT WOMEN
INFINITI recommends that pregnant women use seat belts. The seat belt should be worn snugly and always position the lap belt as low as possible around the hips, not the waist. Place the shoulder belt over your shoulder and across your chest. Never run the lap/shoulder belt over your abdominal area. Contact your doctor for specific recommendations.

INJURED PERSONS
INFINITI recommends that injured persons use seat belts. Check with your doctor for specific recommendations.

PRE-CRASH SEAT BELTS WITH COMFORT FUNCTION (front seats) (if so equipped)
The pre-crash seat belt tightens the seat belt with a motor to help restrain front-seat occupants. This helps reduce the risk of injury in a collision.

The motor retracts the seat belt under the following emergency conditions:

  1. During emergency braking.
  2. During sudden steering maneuvers.
  3. Activation of the Forward Emergency Braking (FEB) with Pedestrian Detection system (if so equipped). For additional information, refer to “Forward Emergency Braking (FEB) with Pedestrian Detection system” in the “Starting and Driving” section of this manual.
  4. In the event of certain types of rollover collisions.

The pre-crash seat belt will not be active when:

  1. The seat belt is not fastened.
  2. The vehicle speed is under 10 mph (15 km/h) during emergency braking.
  3. The vehicle speed is under 19 mph (30 km/h) during sudden steering maneuvers.

The pre-crash seat belt will not be active when the brake pedal is not depressed except when sudden steering maneuvers occur and the Forward Emergency Braking (FEB) with Pedestrian Detection system (if so equipped) activates. The motor also retracts the seat belt when the seat belt is fastened or unfastened. When the seat belt is fastened, the motor tightens the seat belt for a snug fit. When the seat belt is unfastened, the motor retracts the seat belt. If the seat belt is not fully retracted, the motor retracts the seat belt when the door is opened. Always wear your seat belt correctly and sit upright and well back.
If the motor cannot retract the seat belt when the seat belt is fastened or unfastened, it may indicate the pre-crash seat belt system has a malfunctioned. It is recommended that you visit an INFINITI retailer to check and repair the system. When the seat belt is retracted repeatedly in a short period of time, the motor may not be able to retract the seat belt. After 8 minutes, the motor reactivates and retracts the seat belt. If the seat belt still cannot be retracted by the motor, the pre-crash seat belt system has a malfunction. It is recommended that you visit an INFINITI retailer to check and repair the system.

THREE-POINT TYPE SEAT BELT WITH RETRACTOR

WARNING:

  1. Every person who drives or rides in this vehicle should use a seat belt at all times. Children should be in the rear seats and in an appropriate restraint.
  2. Do not ride in a moving vehicle when the seatback is reclined. This can be dangerous. The shoulder belt will not be against your body. In an accident, you could be thrown into it and receive neck or other serious injuries. You could also slide under the lap belt and receive serious internal injuries.
  3. For the most effective protection when the vehicle is in motion, the seat should be upright. Always sit well back and upright in the seat with both feet on the floor and adjust the seat belt properly.
  4. Do not allow children to play with seat belts. Most seating positions are equipped with Automatic Locking Re-tractor (ALR) mode seat belts. If the seat belt becomes wrapped around a child’s neck with the ALR mode activated, the child can be seriously injured or killed if the seat belt retracts and becomes tight. This can occur even if the vehicle is parked. Unbuckle the seat belt to release the child. If the seat belt cannot be un-buckled or is already unbuckled, release the child by cutting the seat belt with a suitable tool (such as a knife or scissors) to release the seat belt.

The ELR locks the seat belt when the vehicle slows down rapidly or during certain impacts.
The ALR mode (child restraint mode) locks the seat belt for child restraint installation.
When the ALR mode is activated, the seat belt cannot be extended again until the seat belt tongue is detached from the buckle and fully retracted. The seat belt returns to the ELR mode after the seat belt fully retracts. For additional information, refer to “Child restraints” in this section.
The ALR mode should be used only for child restraint installation. During normal seat belt use by an occupant, the ALR mode should not be activated. If it is activated, it may cause uncomfortable seat belt tension. It can also change the operation of the front passenger airbag. For additional information, refer to “Front passenger air bag and status light” in this section.

WARNING:
When fastening the seat belts, be certain that the seatbacks are completely secured in the latched position. If they are not completely secured, passengers may be injured in an accident or sudden stop.

Seat belt hook
When the seat belt is not in use and when folding down the rear seats, hook the rear seat belts on the seat belt hooks.

SEAT BELT EXTENDERS
If, because of body size or driving position, it is not possible to properly fit the lap/shoulder belt and fasten it, an extender that is compatible with the installed seat belts is available for purchase. The extender adds approximately 8 in (200 mm) of length and may be used for all seating positions.

WARNING:

  1. Only INFINITI seat belt extenders, made by the same company which made the original equipment seat belts, should be used with INFINITI seat belts.
  2. Adults and children who can use the standard seat belt should not use an extender. Such unnecessary use could result in serious personal injury in the event of an accident.
  3. Never use seat belt extenders to install child restraints. If the child restraint is not secured properly, the child could be seriously injured or killed in a collision or a sudden stop.

SEAT BELT MAINTENANCE

  1. To clean the seat belt webbing, apply a mild soap solution or any solution recommended for cleaning upholstery or carpet. Then wipe with a cloth and allow the seat belts to dry in the shade. Do not allow the seat belts to retract until they are completely dry.
  2. If dirt builds up in the shoulder belt guide of the seat belt anchors, the seat belts may retract slowly. Wipe the shoulder belt guide with a clean, dry cloth.
  3. Periodically check to see that the seat belt and the metal components, such as buckles, tongues, retractors, flexible wires, and anchors, work properly. If loose parts, deterioration, cuts or other damage on the webbing is found, the entire seat belt assembly should be replaced.

Useful Link

Download link:https://www.infinitiusa.com/owners/vehicle-resources/manuals-guides.html

Leave a Reply

Your email address will not be published. Required fields are marked *