Jayco Eagle Fifth Wheels 2023 Roller Shades User Manual
Roller Shades
Clean by using soapy water or a mild cleaning solution on spots. Try a small area first because harsh household cleaners or detergents may cause damage to fabric or loss of color. It is recommended to dust the rails and fabrics of the shades on a regular basis. Shades should be kept in the closed or up position when not in use to maintain pleat retention and minimize dirt and soil build-up.
NOTE:
If your recreation vehicle must be stored for an extended period of time, store shades in the up position and cover your windows with additional protection (I.E. Cut out cardboard).
Cabinetry and Tables
To keep hardwood doors, cabinet fronts, and hardwood tables looking like new regular dust with a soft cloth dampened with a cleaning polish or mild detergent solution. Avoid using ammonia-based products or silicone oils as they may cause damage if used over a long period of time. The finish is durable and resistant to most household spills. However, spills should be wiped up promptly to avoid potential problems. Excessive prolonged exposure to direct sunlight, high temperatures, and high humidity can cause damage to both the finish and the wood itself.
Interior Wall Panel
To clean, use a mild solution of soap and lukewarm water with a soft sponge or cloth. Wipe dry with a soft, clean cloth. Putty sticks can be used to cover scratches on the wood surface wall panels. These can be obtained from local hardwood stores and lumberyards. Contact your dealership service department for assistance in repairing décor paneling.
Caution
Do not use abrasive cleaners as they may cause the vinyl to scratch and become dull. Do not use cleaners that contain bleach.
ABS Plastics
Dust and wipe clean with a soft, damp cloth or chamois, wiping gently. Do not use gritty or abrasive particle soaps or scouring compounds to clean ABS plastic. Avoid using “citrus” or biodegradable cleaners that contain “D-Limonene” as they may damage plastic materials.
Sofa and Dinette
Your recreation vehicle may be equipped with one of the following sofa styles.
Hide-A-Bed Sofa or Sofa Sleeper
To make the hide-a-bed sofa into a bed, remove the seat cushions and pull the sofa back towards you firmly and gently. Activate (or deflate) the air mattress (if so equipped) using the supplied furniture manufacturer’s instructions. To convert the hide-a-bed back into the upright sofa position, reverse the process.
Jack Knife Sofa
The jack knife sofa functions much the same as a residential futon. To make the sofa into a bed, lift up the bottom seat cushion and pull it towards you. The sofa’s back will drop. down to provide a sleeping surface. For additional comfort and to reduce fabric damage, you may want to place a cover or air mattress (customer supplied) over the sofa when it is in the sleeping position.
Trifold Sofa
The tri-fold sofa offers very similar features to a traditional hide-a-bed. To convert the sofa into a bed.
- Remove the tri-fold sofa pillows and set them aside.
- Using the strap handle, pull the sleeping surface up, then out.
- While the sleeping surface is up, fold-out legs. Extend the sleeping surface until grounded.
- Once the sleeping surface is grounded, fold the headboard down flat.
Cube Sofa
The Cube Sofa functions similarly to a residential futon. The slanted back pillows offer numerous options as a sofa, along with the ability to extend the cushions for additional sleeping space.
Booth Dinette (if so equipped)
The dinette is designed to seat up to four adults. Depending on your model, there may be a storage area in the dinette bench. To access this storage, remove all the cushions and lift up on the bottom seat support. If the bottom seat support is secured closed with screws, do not remove the seat support or use this area for storage. The dinette seats that are secured with screws contain factory-installed equipment and should only be accessed by a qualified service technician.
Converting the dinette to the bed position
Remove all the cushions from the booth dinette. Lift up the tabletop and remove the detachable table legs. Place the tabletop on the ledges provided between the booth dinette benches. Lay the seat back cushions against the back of the dinette bench. Lay the dinette seat bottom cushions in between the seat back cushions. The area where the cushions meet should be slightly raised. Push the raised cushion ends down gently as the cushions are designed to fit snugly. Reverse this process when converting back to the booth dinette.
Free-Standing Table and Chairs (if so equipped)
The free-standing dinette table can be positioned to seat up to four people. To prevent damage, the free-standing dinette chairs should be fastened securely at the dinette table when traveling.
[amalinkspro_table id=”32452″ new-window=”on” nofollow=”on” addtocart=”off” /]
Reference Links
View Full User Guide: Jayco Eagle Fifth Wheels 2023 User Manual
Download Manuals: https://www.jayco.com/manuals