2023 Jayco Eagle Fifth Wheels Turning on the touchscreen system 

The 2023 Jayco Eagle Fifth Wheels come with a state-of-the-art touchscreen interface that is the epitome of modern RV travel luxury and ease. This modern marvel has a large, easy-to-use touchscreen display. Turning it on is the first step to a better and easier RVing experience. This tablet is built right into the RV’s interior. It’s more than just a control center—it’s a digital command center for almost every part of your trip. This touchscreen display does everything, from entertainment and guidance to climate control and RV-specific features like slide-outs and leveling systems. Its easy-to-use design and the possibility of integrating with a smartphone make sure that you stay connected, informed, and in charge while you’re on the road. Whether you’ve been RVing for years or this is your first time, the touchscreen on the 2023 Jayco Eagle Fifth Wheels is your ticket to a modern, comfortable, and easy trip.

Turning on the touchscreen system

The touchscreen system automatically boots up when power is turned ON to the RV.

If the touchscreen system requires a reset, or if the touchscreen has been turned off:

• Pressing either of the arrow keys, or a numbered key will turn the system ON (EXT or RET keys will not turn on the system).
• Two splash screens with the BMPRO logo will appear first during boot-up.
• To go to the RV Master touchscreen, press the icon for the touchscreen (or let the bootup process finish).
• The RV Master touchscreen is now active and ready to use.

NOTE:
Pressing the RESET button on the touchscreen will also reboot the touchscreen.

Pairing a smart device to the RV Master app
Download and install the BMPRO RV Master app from the Google Play Store or the Apple App Store. When the app is started, press the Menu Display arrow keys until the small display shows PA. Then press the EXT button to put the system in pairing mode. Open the Bluetooth setting on your phone and select “RVGenius” in the list of devices available. Once connected this app will control the devices in the RV. Up to (3) personal Bluetooth devices can be connected to the RVMaster system. Only (1) one device at a time can be paired.

NOTE: The RVMaster Motors screen automatically locks on your smart device after connecting to the app to prevent inadvertent operation of the sys-tems in the RV. The lockout indicator on the screen must swipe to unlock the motor controls. When operating any motor control, the system locks out all other control devices (e.g. smartphone or command panel) until the motorized device in use has stopped.

Electrical System

• Kitchen and bath vents and vent covers
• Door locks
• TV, radio and DVD systems
• Automatic fireplace control
• Lowering/raising the automatic ramp door (toy hauler).

RVMaster Switches (remote controls)

The system will come with multiple individual smart remote controls (or RVMaster Switch-es). Depending on your floor plan or system, these can be programmed for individual room control. The remotes are installed on the wall in each room.

Pairing the remote controls

Remote controls come from the factory paired with your system. If remotes get “un-paired” from the RV Bluetooth system, press the arrow keys at the bottom of the touchscreen until PA appears in the Menu Display. Press the RET button and the display will blink on and off indicating the system is ready for pairing. Press and hold any two buttons on the remote control. The PA display will go out when the pairing is complete. The remote will now be able to operate the systems labeled on the individual buttons for that specific room and remote.

Remote Batteries

The RV Master Switch remote controls use a 3V Lithium CR2032 coin cell battery.

To access the battery on the back of the remote, remove the remote from the wall:

• Pull the bottom of the remote away from the wall. There will be an audible snap as it releases from the clip.
• Lift the remote upwards to unhook it at the top.
• The remote will separate from the wall mount.

To replace the remote on the wall:

• Hook the top of the remote on the top of the wall bracket.
• Push the bottom of the remote back in place. There will be an audible snap as as it attaches to the mount.

Touchscreen Control Panel

The row of buttons at the bottom of the touchscreen control certain pre-programmed features and allow control of the slideouts, awnings, lights and water pump. In the event the touchscreen is not working, this Control Panel will allow manual operation separate from the touchscreen.

• NOTE: Buttons #1 through #4 are pre-programmed from the factory and cannot be changed to perform other functions.
• Button #1 – Turns all interior lights ON or OFF. Press once for ON, and press again for OFF.
• Button #2 – Turns all outside lights ON or OFF, which include security lights, awning lights, and ramp door lights (toy hauler). It does not operate the front cap LED lights. Press once for ON, press again for OFF.
• Button #3 – Turns inside and outside lights ON or OFF. Press once for ON, press again for OFF.
• Button #4 – Turns water pump ON or OFF. Press once for ON, press again for OFF.
• Arrow Buttons – Used to select awnings or slide outs, pair your smart phone or tablet to the touchscreen system, pairing the dedicated remotes, or to turn the touchscreen display OFF.
• RESET Button – There is a small pinhole above the left arrow on the Menu Display that will reset the touchscreen.
• EXT Button – Used to extend either slide outs or awnings. Used in conjunction with the arrow buttons to select an awning or slide out (also used when pairing your smart phone or tablet to the system).
• RET Button – Used to Retract either slideouts or awnings. Used in conjunction with the arrow buttons to select an awning or slide out (also used when pairing wall-mounted remotes to the system).-

Menu Display (between arrow buttons) use the arrow keys to scroll through the selections.

• Menu Display shows A1 or A2 (awnings). Cycle between awnings with the arrows. Press and hold EXT or RET to extend or retract the selected awning.
• Menu Display shows b1 or b2 (bunk lifts).
• Cycle between bunk lifts with the arrows press EXT or RET to operate.
• Menu Display shows J1, J2, J3 or J4 (jacks).
• Cycle between jacks then press EXT or RET to operate.
• Menu Display shows S1, S2, S3 or S4 (slide outs).
• Cycle between slides using the arrow buttons. Press and hold EXT or RET to extend or retract the selected slide out.
• Menu Display shows OF (must then press the EXT button) to turn off all loads (lights and fans plus touchscreen). This does not shut down the generator. Press any of the numbered light buttons to turn the touchscreen back on.
• Menu Display shows PA (pair). Press EXT to pair your phone or tablet or press RET to pair one of the wall mounted remote controls. The PA on the small dis-play will flash on and off indicating the system is in pairing mode and can be connected to a Bluetooth smart device. When the device is paired, PA display will go out.

Turning on the touchscreen system

The touchscreen system automatically boots up when power is turned ON to the RV. If the touchscreen system requires a reset, or if the touchscreen has been turned off:

• Pressing either of the arrow keys, or a numbered key will turn the system ON (EXT or RET keys will not turn on the system).
• Two splash screens with the BMPRO logo will appear first during boot up.
• To go to the RVMaster touchscreen, press the icon for the touchscreen (or let the boot up process finish).
• The RVMaster touchscreen is now active and ready to use.

NOTE Pressing the RESET button on the touchscreen will also reboot the touchscreen.

Pairing a smart device to the RVMaster app

Download and install the BMPRO RVMaster app from the Google Play Store or the Apple App Store. When the app is started, press the Menu Display arrow keys until the small display shows PA. Then press the EXT button to put the system in pairing mode. Open the Bluetooth setting on your phone and select “RVGenius” in the list of devices available. Once connected this app will control the devices in the RV. Up to (3) personal Bluetooth devices can be connected to the RVMaster system. Only (1) device at a time can be paired.

NOTE: The RVMaster Motors screen automatically locks on your smart de-vice after connecting to the app to prevent inadvertent operation of the sys-tems in the RV. The lockout indicator on the screen must swiped to unlock the motor controls. When operating any motor control, the system locks out all other control devices (e.g. smartphone or command panel) until the motorized device in use has stopped.

Unpairing Bluetooth devices

Four Bluetooth devices can be paired to the system: the RV Master Controller (touchscreen) and (3) other smart devices. The RV Master Node will need to be cleared of ALL devices before re-pairing other devices. One device cannot be replaced with another device.

To clear the RV Master Node of all paired devices (which will also include the touchscreen):

• Go to the RV Master App in your general settings on the touchscreen.
• Select Bluetooth Connection.
• Press the UNPAIR RV bar at the bottom right corner of the screen.
• Go back to the Menu Display under the touchscreen and select the PA function.
•  Press and HOLD the EXT button for 10 seconds.
• The number 1 will scroll across the Menu Display.
• The RV Master Node is now clear of all connected devices.
• Pair the RV Master Controller (touchscreen) back with the RV Master Node.
•  Go back to the general settings on the touchscreen (top of the screen gear icon).
• Go to Bluetooth.
• The system should say connected.
• Three other devices can now be paired to the system using the pairing method previously described.

Tire Pressure Monitor System (TPMS)

Depending on your model, you may have a Tire Pressure Monitor System (TPMS). The TPMS system is monitored by and sensors paired to the system through the touchscreen. The TPMS System comes with sensors that screw on to the valve stem of each tire. There will be a maximum of (6) sensors (for triple axle) and (4) sensors (for the dual axle). The sensors are programmed according to their tire position on the trailer, and not to each individual tire.
Rotating the tires:

WARNING
FAILURE TO ACT IN ACCORDANCE WITH THE FOLLOWING WARNINGS MAY RESULT IN SERIOUS PERSONAL INJURY OR DEATH!

• The TPMS system is designed to monitor tire pressure and temperature. It is not designed to provide warning of sudden critical tire damage and blowout caused by external effects. The driver should react promptly to any warning and correct the problem.

Tires can fail for other reasons besides low pressure, high temperature or overloading. Always be on the alert for other tire problems as indicated by unusual noises, vibrations, uneven tread wear, or bulges on the tires. If any of these symptoms occur, have the tires inspected immediately by a tire professional.

CAUTION

• TPMS sensors – DO NOT MOVE WITH THE TIRES!
• The TPMS sensor on the front tire (on either side of the trailer) STAYS at the front tire position when rotating tires.
• The TPMS sensor on the middle tire (on either side of a 3 axle trailer) STAYS at the middle tire position when rotating tires.
• The TPMS sensor on the rear tire (on either side of the trailer) STAYS at the rear tire position when rotating tires (on both dual and triple axle trailers).
• This guarantees tire pressures displayed on the touchscreen are accurate-ly showing the correct tire locations on the trailer.

Heating Cooling operation

There are no thermostats located in the RV. Heating and cooling is controlled through the BMPRO RVMaster touchscreen Climate screen. One or more small sensors are located on the walls of the RV. These sensors work with the touchscreen to monitor the temperature in an area of the RV and adjust according to climate settings on the touchscreen.

Home Screen

Shows an overview of the key features of your RV: climate, lights, motors, tanks and energy.

Water Screen

Shows tank monitors (black, gray, fresh) water pump switches, water heater switches for gas and electric and possibly the tank heater switch.

Motors Screen

• Shows controls for the leveling system, awnings, slide outs, jacks and the ramp door (if applicable).
• The app on your smart device automatically locks out the Motors screen on your device. You must swipe to unlock the screen in order to operate motors.
• Only one motor may be operated at a time.
• When a motor is in operation, motor control is disabled on any other device running the RV Master app.

Climate Screen
Shows the thermostat to control heating and cooling in the RV, and fan speed.
Lights Screen
Turn lights on and off along with ability to dim certain lighting with sliders.
Energy Center Screen
Shows generator on and off, AGS (auto generator start), battery levels, and fuel levels.
Fans and Vents Screen
Shows kitchen and bath fans and automatic vents (if equipped). Turn fans on and off, and open and close automatic vents. General Settings Screen (gear icon at top right corner).

• Check the Bluetooth connection between RV Master Controller (touchscreen) and the RV Master Node.
• Set preferred temperature units (Fahrenheit/Celsius).
• Access the AGS Energy settings.
• Check the battery condition of any installed remote control (RV Master Switch).
• Access a digital version of the RV Master owner manual.

FAQ