Jayco Eagle FW 2019 User Manual

The Jayco Eagle FW 2019 is a high-end fifth-wheel RV that is well-made and comfortable. It has a great mix of style, sturdiness, and comfort. This RV was made with careful attention to every detail, making it a great place to live for people who want a high-end travel trailer. The Eagle FW’s interior is large and elegantly built, with high-end furniture, modern finishes, and layouts that put comfort and convenience first. The living room is a comfortable place to relax and have fun, and the kitchen has everything you need to make gourmet meals. The master bedroom is a peaceful place to relax. It has a comfortable bed and a lot of closet space. The bathroom has modern equipment and looks and feels like a spa. The Jayco Eagle FW 2019 sets a new standard for luxury fifth-wheel RVs with its strong build, high-tech features, and high-end amenities. It is the best choice for RV travelers who want both comfort and style on their trips.

Torque Wrench Usage

1. Tools should be maintained, in good condition, and stored appropriately.
   1. Avoid dropping or sliding a torque wrench. Dropping it can cause the instrument to lose reliable calibration.
   2. Damaged tools must not be used and must be removed from service for evaluation and either reported and re-calibrated or replaced.
2. Do not use accessories or handle extensions unless specifically allowed by the torque wrench manufacturer.
3. Do not use the torque wrench as the primary means of tightening or loosening fasteners.
4. Torque wrenches are length specific.
   1. Grasp the torque wrench in the center of the handle when applying torque pressure.
   2. Place one hand on top of the other when using two hands.
5. Apply torque in a slow, steady manner in a downward direction and avoid sudden “jerking” movements.
6. When the wrench signals (by clicking, beeping or lights) that a specific torque has been reached, stop immediately.

Tires

Read and understand the following before taking your first trip in your RV. Routine maintenance on your RV is important. To insure your tires are operating safely, regular inspection of the tires and checking tire pressures is absolutely mandatory. Alignment, balance and bearing wear will affect tire wear. Make sure to look for cracking, bulging, uneven tread wear, etc.

CAUTION:
Tire wear should be checked frequently. Once a wear pattern becomes firmly established in a tire it is difficult to stop, even if the underlying cause is correct.

DANGER:
Failure to follow proper inflation guidelines may result in tire failure, which, under certain circumstances can cause loss of vehicle control or accidents that may result in property damage, bodily injury and/or death.

Tire Pressure

You must follow the manufacturer’s inflation guidelines for maximum load capacity; under-inflation is just as dangerous as over-inflation.
Proper inflation should be monitored closely. Failure to do so could result in the overheating of a tire causing a blowout. Inflation pressure should be as recommended by the tire manufacturer or as the federal label for the recreation vehicle indicates. When you are using your Recreational Vehicle, check inflation pressure weekly. Pressure should be checked when the tires are cold. During travel, tires heat up and pressure increas-es. Do not bleed air from hot tires or your tires may then be under-inflated.

NOTE: Cold tire inflation pressure is defined as a tire that has not been used for three or more hours, or has been driven less than one mile. Tire inflation pressure of a hot tire may show an increase of as much as 6 psi over a cold tire.

WARNING:

1. It is recommended that the tire pressure be checked at the beginning of each trip to obtain the maximum life of the tire. Follow the instructions listed on the Federal Certification label, to determine the correct tire pres-sure. Under-inflation may cause tire failures and swaying resulting in loss of control, injury, death or property damage.
2. Towable recreation vehicles are equipped with special trailer (ST) tires that have a maximum speed rating of 65 MPH (104 km/h). You should not exceed this speed rating. Exceeding the tire speed rating may result in tire failure, which could lead to an accident causing serious injury or death.

Changing A Tire
If you experience a flat tire on your recreational vehicle while driving, gradually decrease your speed and move the recreational vehicle to a safe place on the side of the road.

1. Keep the recreational vehicle attached to the tow vehicle. Block the tire on the opposite side of the recreational vehicle from the tire you are changing.
2. Loosen the wheel lug on the tire you are changing before jacking up the vehicle. DO NOT remove the lug nuts; only loosen them for ease of removal when the tire is off the ground.
3. Locate the mainframe rail of the trailer (it spans from front to back just inside the tires).
4. To raise the recreational vehicle, place the jack (hydraulic or screw) under the main frame rail. It must be just ahead of the front tire or just behind the rear tire.

Tire Replacement
Any service or warranty coverage on tires is to be handled by the tire manufacturer or the store representing the brand installed on your recreation vehicle. They are not to be returned to your dealer or recreation vehicle manufacturer. If you have questions regarding your tires, contact the tire manufacturer.

WARNING:

1. Do not use the stabilizer jacks to support the recreational vehicle while under the vehicle or changing tires. The stabilizer jacks are designed as a stabilizing system only. Do not use the stabilizer jacks as a jack or in conjunction with a jack.
2. Never raise the recreational vehicle by placing the jack under the axle, springs or any attachment parts.

Failure to comply with these guidelines could result in damage to the ve-hicle and risk causing serious injury or death.

When replacing tires:

1. Be sure to use only tires that are rated for recreation vehicle use. The use of passenger tires should be avoided. The load rating/range embossed on the sidewall of passenger tires must be de-rated accordingly; they do not have the same load capability as tires that are specifically identified for recreational vehicle use. Failure to use tires that are properly matched to your recreational vehicle could lead to premature tire wear or less-than-optimum trailer handling.
2. Be sure to replace it with a tire of the same size and specifications (refer to the Federal Certification label.)

WARNING:
DO NOT exceed the maximum load capacity of 100 lbs. for the hoist. DO NOT use air driven guns or impact wrenches to lift the spare tire to the travel position.

Depending on your model, the spare tire may have (side or bottom) brackets or it will be mounted against the underside of the recreation vehicle (flush mount) to give it stability in travel.

Raising and lowering the hoist
The crank handle to raise and lower the tire will be located (fastened to the sidewall) in a basement compartment of the recreational vehicle. Insert the crank handle into the crank access port located either in the center of the rear bumper or on the sidewall of the RV. Turn the crank handle to raise/lower the tire. Two “crisp breaks” must be heard and felt to insure the proper seating of the tire for travel.

NOTE: If the manual crank access port is located in a slideout, the slideout room must be in the travel position to allow the crank to reach the mechanism used to raise or lower the tire.

Useful Link

Download Manuals: https://www.jayco.com/manuals/