2020 Jeep Cherokee Instrument Cluster Dashboard | How to use
Welcome to the 2020 Jeep Cherokee’s advanced and intuitive instrument cluster dashboard! This cutting-edge dashboard is designed to provide you with a seamless and engaging driving experience by combining modern technology and user-friendly features. In this guide, we’ll look at how the instrument cluster works and how to use its various components. Increase convenience with steering wheel-mounted controls, which allow you to interact with the instrument cluster without taking your hands off the wheel. Adjust settings, navigate menus, and switch between various information displays with ease.
The instrument cluster is seamlessly integrated with the vehicle’s navigation system, which provides turn-by-turn directions and real-time traffic updates. Stay on course with clear visual and audible cues, which improves your overall driving experience. As you embark on your journey with the 2020 Jeep Cherokee, allow the instrument cluster to be your trusted companion, providing a wealth of information and improving your driving experience every mile.
2023 JEEP CHEROKEE Specs, Price, Features, Mileage (Brochure)
Instrument Cluster
Instrument Cluster Descriptions
- Tachometer
Indicates the engine speed in revolutions per minute (RPM x 1000). - Instrument Cluster Display
The instrument cluster display features a driver-interactive display. Refer to “Instrument Cluster Dis-play” within this section for further information. - Speedometer
Indicates vehicle speed. - Fuel Gauge
The fuel gauge shows the level of fuel in the fuel tank when the ignition is in the ON/RUN mode.
The fuel pump symbol points to the side of the vehicle where the fuel door is located. - Temperature Gauge
The temperature gauge shows engine coolant temperature. Any reading within the normal range indicates that the engine cooling system is operating satisfactorily.
The gauge will likely indicate a higher temperature when driving in hot weather or up mountain grades. It should not be allowed to exceed the upper limits of the normal operating range.
WARNING!
A hot engine cooling system is dangerous. You or others could be badly burned by steam or boiling coolant. You may want to call an authorized dealer for service if your vehicle overheats.
CAUTION!
- Driving with a hot engine cooling system could dam-age your vehicle. If the temperature gauge reads “H” pull over and stop the vehicle. Idle the vehicle with the air conditioner turned off until the pointer drops back into the normal range. If the pointer remains on the “H”, turn the engine off immediately and call an authorized dealer for service.
Fuel Gauge
- The fuel gauge shows the level of fuel in the fuel
tank when the ignition is in the ON/RUN mode. 
The fuel pump symbol points to the side of the
vehicle where the fuel door is located.
NOTE: The hard telltales will illuminate for a bulb check when the ignition is first cycled.
INSTRUMENT CLUSTER DISPLAY
Your vehicle may be equipped with an instrument cluster display, which offers useful information to the driver. With the ignition in the STOP/OFF mode, opening/closing of a door will activate the display for viewing, and display the total miles, or kilometres, in the odometer. Your instrument cluster display is designed to display important information about your vehicle’s systems and features. Using a driver interactive display located on the instrument panel, your instrument cluster display can show you how systems are working and give you warnings when they aren’t.
The steering wheel-mounted controls allow you to scroll through and enter the main menus and submenus. You can access the specific information you want and make selections and adjustments.
Instrument Cluster Display Location And Controls
The instrument cluster display features a driver-interactive display that is located in the instrument cluster.
Base Instrument Cluster Display
The instrument cluster display menu items consist of the
following:
- Speedometer
- Vehicle Info
- Driver Assist
- Fuel Economy
- Trip Info
- Stop/Start
- Audio
- Messages
- Screen Setup
The system allows the driver to select information by pushing the following buttons mounted on the steering wheel:
Instrument Cluster Display Control Buttons
- Left Arrow Button
- Up Arrow Button
- Right Arrow Button
- Down Arrow Button
- OK Button
Up Arrow Button
Push and release the up arrow button to scroll upward through the main menu and submenus.
Down Arrow Button
Push and release the down arrow button to scroll down-ward through the main menu and submenus.
Right Arrow Button
Push and release the right arrow button to access the information screens or submenu screens of a main menu item.
Left Arrow Button
Push and release the left arrow button to access the information screens or submenu screens of a main menu item.- OK Button
Push the OK button to access/select the information screens or submenu screens of a main menu item. Push and hold the OK button to reset displayed/selected features that can be reset.
Oil Change Reset
Your vehicle may be equipped with an engine oil change indicator system. The “Oil Change Required” message will display in the instrument cluster display for five seconds after a single chime has sounded to indicate the next scheduled oil change interval. The engine oil change indicator system is duty cycle based, which means the engine oil change interval may fluctuate, dependent upon your personal driving style.
Unless reset, this message will continue to display each time you place the ignition in the ON/RUN position. To turn off the message temporarily, push and release the OK button. To reset the oil change indicator system (after performing the scheduled maintenance), refer to the following procedure.
Oil Life Reset
- Without pushing the brake pedal, place the ignition in the ON/RUN mode (do not start the engine).
- Navigate to Oil Life submenu in Vehicle Info in the instrument cluster display.
- Push and hold the OK button until the gauge resets to 100%.
Secondary Method For Oil Change Reset Procedure
- Without pushing the brake pedal, place the ignition in the ON/RUN position (do not start the engine).
- Fully press the accelerator pedal, slowly, three times within ten seconds.
- Without pushing the brake pedal, place the ignition in the OFF/LOCK position.
NOTE: If the indicator message illuminates when you start the vehicle, the oil change indicator system did not reset. If necessary, repeat this procedure.
Instrument Cluster Display Menu Items
NOTE: The instrument cluster displays menu items display in the center of the instrument cluster. Menu items may vary depending on your vehicle’s features.
Speedometer
Push and release the up or down arrow button until the speedometer menu icon is displayed in the instrument cluster display. Push and release the OK button to toggle units (mph or km/h) of the speedometer.
Vehicle Info
Push and release the up or down arrow button until the Vehicle Info menu icon is displayed in the instrument cluster display. Push and release the left or right arrow button to scroll through the information submenus and push and release the OK button to select or reset the resettable submenus.
- Tire Pressure: This menu option will display the current tire pressure. A low tire will be highlighted in red.
- Coolant Temperature: This menu option will display the current coolant temperature of the vehicle.
- Transmission Temperature: This menu will display the current transmission temperature of the vehicle.
- Oil Life: This menu option will display the current oil life of the vehicle.
- Oil Temperature: This menu option will display the current oil temperature level of the vehicle.
- Battery Voltage: This menu option will display the current voltage level of the battery.
Driver Assist
Push and release the up or down arrow button until the Driver Assist menu title is highlighted in the instrument cluster display.
Adaptive Cruise Control (ACC) Menu
The instrument cluster display displays the current ACC and LaneSense system settings. The information displayed depends on the status of ACC and LaneSense.
Push the Adaptive Cruise Control (ACC) on/off button (located on the steering wheel) until one of the following displays in the instrument cluster display:
Adaptive Cruise Control Off
When ACC is deactivated, the display will read “Adaptive Cruise Control Off.”
Adaptive Cruise Control Ready
When ACC is activated but the vehicle speed setting has not been selected, the display will read “Adaptive Cruise Control Ready.”
Push and release the SET + or the SET- button (located on the steering wheel) and the following will display in the instrument cluster display:
ACC SET
When ACC is set, the set speed will display in the instrument cluster.
The ACC screen may display once again if any ACC activity occurs, which may include any of the following:
- Distance Setting Change
- System Cancel
- Driver Override
- System Off
- ACC Proximity Warning
- ACC Unavailable Warning
NOTE: The instrument cluster display will return to the last display selected after five seconds of no ACC display activity.
Refer to “Adaptive Cruise Control (ACC) — If Equipped” in “Starting And Operating” for further information.
LaneSense
The instrument cluster display displays the current Lane-Sense system settings. The information displayed depends on the LaneSense system status and the conditions that need to be met. Refer to “LaneSense — If Equipped” in “Starting And Operating” for further information.
Fuel Economy
Push and release the up or down arrow button until the Fuel Economy menu title is displayed in the instrument cluster display. Toggle the left or right arrow button to select the screen with or without the current fuel economy display. Push and hold the OK button to reset the average fuel economy feature.
Range – The display shows the estimated distance (mi or km) that can be travelled with the fuel remaining in the tank. When the Range value is less than 10 miles (16 km) estimated driving distance, the Range display will change to a “LOW FUEL” message. Adding a significant amount of fuel to the vehicle will turn off the “LOW FUEL” message and a new Range value will display. Range cannot be reset through the OK button.
NOTE: Significant changes in driving style or vehicle loading will greatly affect the actual drivable distance of the vehicle, regardless of the Range displayed value.
- Average – The display shows the average fuel economy (MPG, L/100 km, or km/L) since the last reset.
- Current – This display shows the current fuel economy (MPG, L/100 km, or km/L) form while driving.
Trip Info
Push and release the up or down arrow button until the Trip menu title is displayed in the instrument cluster display. Toggle the left or right arrow button to select Trip A or Trip B. The Trip information will display the following:
- Distance – Shows the total distance (mi or km) traveled for Trip A or Trip B since the last reset.
- Average Fuel Economy – Shows the average fuel economy (MPG or L/100 km or km/L) of Trip A or Trip B since the last reset.
- Elapsed Time – Shows the total elapsed time of travel since Trip A or Trip B has been reset.
Hold the OK button to reset feature information.
Stop/Start
Push and release the up or down arrow button until the Stop/Start menu title is displayed in the instrument cluster display.
Audio
Push and release the up or down arrow button until the Audio menu title is displayed in the instrument cluster display.
Stored Messages
Push and release the up or down arrow button until the Messages Menu Icon is highlighted in the instrument cluster display. This feature shows the number of stored warning messages. Pushing the left or right arrow button will allow you to scroll through the stored messages.
Screen Setup
Push and release the up or down arrow button until the Screen Setup Menu Icon/Title is highlighted in the instrument cluster display. Push and release the OK button to enter the submenus and follow the prompts on the screen as needed. The Screen Setup feature allows you to change what information is displayed in the instrument cluster as well as the location where that information is displayed.
Screen Setup Driver Selectable Items
Upper Left
|
Upper Right
|
Center
|
Favorite Menus
|
Odometer
|
Gear Display — If Equipped With A Premium Cluster
|
Defaults (defaults: Outside Temp UL, Compass UR, Center Menu Title)
|
FAQ’s
When the check engine light illuminates, it may indicate an issue with the engine or emissions system. It is best to have your vehicle inspected by a qualified mechanic to identify and resolve the issue.
The temperature gauge indicates the engine’s operating temperature. If it approaches the upper limit, it indicates a possible overheating. Pull over safely, turn off the engine, and let it cool before calling for help.
Oil pressure warning light indicates low oil pressure. Stop the vehicle, turn off the engine, and check the oil level. If it’s low, add more oil. If the light persists, contact a mechanic.
Monitor tire pressure through dashboard and manually check at least once a month. Adjust the pressure as needed to ensure the best tire performance.
The fuel gauge displays general information, but a low fuel warning light alerts you when the fuel level is critically low. Refuel quickly to avoid running out of gas.
The ABS warning light indicates a problem with the anti-lock braking system. Seek professional help to diagnose and repair the ABS system to ensure optimal braking performance.
Use the tachometer to accurately gauge engine RPM and shift gears efficiently. Maintain a constant speed and avoid unnecessary idling to increase overall fuel efficiency.
The battery warning light indicates a charging system issue. Turn off all non-essential electrical components and drive to a service center for inspection.
While the vehicle can be driven, the airbag issue must be addressed as soon as possible. An illuminated airbag warning light indicates a possible malfunction, and airbags may not deploy in the event of an accident.
To reset the trip odometer on the Cherokee Instrument Cluster Dashboard, follow the instructions in the vehicle manual. Typically, this entails pressing a button on the dashboard.
Mild temperature fluctuations are normal. However, if the gauge consistently exhibits extreme fluctuations, it may indicate a cooling system issue that requires attention.
ill the windshield washer fluid reservoir promptly. Ignoring this warning may result in reduced visibility during adverse weather conditions.
The brake warning light indicates issues with the hydraulic brake system, while the ABS warning light indicates problems with the anti-lock braking system.
No, the check oil light indicates a low oil level or pressure. Continuing to drive in this condition may cause severe engine damage. Stop the vehicle and address the oil leak immediately.
If the transmission temperature warning light illuminates, pull over safely and let it cool. Check the transmission fluid levels, and if the problem persists, contact a professional for inspection and repair.
Useful Links
View Full PDF: 2020 Jeep Cherokee Owner’s Manual| Auto User Guide
2023 JEEP CHEROKEE Specs, Price, Features, Mileage (Brochure)
2020 Jeep Cherokee Fuses and Fuse Box | How to fix a blown fuse