2024 Jeep Compass Specifications Owner’s Manual
The 2024 Jeep Compass has a sleek, aerodynamic design and a streamlined appearance with improved LED illumination. Modern interior technology includes an expanded touchscreen interface and sophisticated driver-assistance capabilities.
2024 JEEP Wrangler Review, Price, Features And Mileage (Brochure)
Jeep VEHICLE IDENTIFICATION NUMBER (VIN) Guide
The VIN is found on the left front corner of the windshield and is visible from the outside of the vehicle.
Vehicle Identification Number
NOTE:
It is illegal to remove or alter the VIN.
BRAKE SYSTEM
Your vehicle is equipped with power-assisted brakes as standard equipment. In the event power assist is lost for any reason (for example, repeated brake applications with the engine off), the brakes will still function. However, the effort required to brake the vehicle will be much greater than that required with the power system operating.
If either of the two hydraulic systems loses normal capability, the remaining system will still function with some loss of overall braking effectiveness. This will be evident by increased pedal travel during application and greater pedal force required to slow or stop. In addition, if the malfunction is caused by an internal leak, as the brake fluid in the master cylinder drops, the Brake Warning Light will turn on.
WARNING!
Driving a vehicle with the Brake Warning Light on is dangerous. A significant decrease in braking performance or vehicle stability during braking may occur. It will take you longer to stop the vehicle or will make your vehicle harder to control. You could have a collision. Have the vehicle checked immediately.
WHEEL AND TYRE TORQUE SPECIFICATIONS
Proper lug nut/bolt torque is very important to ensure that the wheel is properly mounted to the vehicle. Any time a wheel has been removed and reinstalled on the vehicle, the lug nuts/bolts should be torqued using a properly calibrated torque wrench using a six-sided
(hex) deep wall socket.
TORQUE SPECIFICATIONS
| Lug Nut/Bolt Torque | **Lug Nut/Bolt Size | Lug Nut/Bolt Socket Size |
| 100 ft-lb (135 N·m) |
M12 x 1.25 | 19 mm |
Use only authorized dealer-recommended lug nuts/bolts and clean or remove any dirt or oil before tightening.
Inspect the wheel mounting surface before mounting the tyre and remove any corrosion or loose particles.
Wheel Mounting Surface
Tighten the lug nuts/bolts in a star pattern until each nut/bolt has been tightened twice. Ensure that the socket is fully engaged on the lug nut/bolt (do not insert it halfway).
Torque Pattern
After 25 miles (40 km), check the lug nut/bolt torque to be sure that all the lug nuts/bolts are properly tightened.
WARNING!
To avoid the risk of forcing the vehicle off the jack, do not tighten the lug nuts/bolts fully until the vehicle has been lowered. Failure to follow this warning may result in personal injury.
FUEL REQUIREMENTS
While operating on gasoline with the required octane number, hearing a light knocking sound from the engine is not a cause for concern. However, if the engine is heard making a heavy knocking sound, see a dealer immediately. Use of gasoline with a lower than recommended octane number can cause engine failure and may void or not be covered by the New Vehicle Lim-ited Warranty.
2.0L ENGINE
This engine is designed to meet all emission requirements and provide satisfactory fuel economy and performance when using unleaded regular gasoline having an octane rating of 87, as specified by the (R+M)/2 method. The use of 91 or higher octane premium gasoline will allow these engines to operate to optimal performance. This increase in performance is most noticeable in hot weather or other heavier load conditions, such as while towing.
REFORMULATED GASOLINE
Many areas of the country require the use of cleaner-burning gasoline referred to as “reformulated gasoline”. Reformulated gasoline contains oxygenates and is specifically blended to reduce vehicle emissions and improve air quality.
The use of reformulated gasoline is recommended. Properly blended reformulated gasoline will provide improved performance and durability of engine and fuel system components.
GASOLINE/OXYGENATE BLENDS
Some fuel suppliers blend unleaded gasoline with oxygenates such as ethanol.
CAUTION!
DO NOT use E-85, gasoline containing methanol, or gasoline containing more than 15% ethanol (E-15). Use of these blends may result in starting and drivability problems, damage critical fuel system components, cause emissions to exceed the applicable standard, and/or cause the Malfunction Indicator Light to illuminate. Please observe pump labels as they should communicate if a fuel contains greater than 15% ethanol (E-15).
Problems that result from using gasoline containing more than 15% ethanol (E-15) or gasoline containing methanol are not the responsibility of the manufacturer and may void the New Vehicle Limited Warranty.
E-85 USAGE IN NON-FLEX FUEL VEHICLES
Non-Flex Fuel Vehicles (FFV) are compatible with gasoline containing up to 15% ethanol (E-15). Gasoline with higher ethanol content may void the New Vehicle Lim-ited Warranty.
If a Non-FFV vehicle is inadvertently fueled with
E-85 fuel, the engine will have some or all of these symptoms:
- Operate in a lean mode.
- OBD II Malfunction Indicator Light on.
- Poor engine performance.
- Poor cold start and cold drivability.
- Increased risk for fuel system component corrosion.
CNG AND LP FUEL SYSTEM MODIFICATIONS
Modifications that allow the engine to run on Compressed Natural Gas (CNG) or Liquid Propane (LP) may result in damage to the engine, emissions, and fuel system components. Problems that result from running CNG or LP are not the responsibility of the manufacturer and may void the New Vehicle Limited Warranty.
METHYLCYCLOPENTADIENYL MANGANESE TRICARBONYL (MMT) IN GASOLINE
MMT is a manganese-containing metallic additive that is blended into some gasoline to increase octane. Gasoline blended with MMT provides no performance advantage beyond gasoline of the same octane number without MMT. Gasoline blended with MMT reduces spark plug life and reduces emissions system performance in some vehicles. The manufacturer recom-mends that gasoline without MMT be used in your vehicle. The MMT content of gasoline may not be indicated on the gasoline pump, therefore, you should ask the gasoline retailer whether or not his/her gasoline contains MMT. MMT is prohibited in Federal and California reformulated gasoline.
MATERIALS ADDED TO FUEL
Besides using unleaded gasoline with the proper octane rating, gasoline that contains detergents, corrosion and stability additives is recommended. Using gasoline that has these additives will help improve fuel economy, reduce emissions, and maintain vehicle performance.
Designated TOP TIER Detergent Gasoline contains a higher level of detergents to further aid in minimizing engine and fuel sys-tem deposits. When available, the usage of TOP TIER Detergent gasoline is recommended. Visit www.toptiergas.com for a list of TOP TIER Detergent Gasoline retailers.
Indiscriminate use of fuel system cleaning agents should be avoided. Many of these materials intended for gum and varnish removal may contain active solvents or similar ingredients. These can harm fuel sys-tem gasket and diaphragm materials.
FUEL SYSTEM CAUTIONS
CAUTION!
Follow these guidelines to maintain your vehicle’s performance:
- The use of leaded gasoline is prohibited by Federal law. Using leaded gasoline can impair engine performance and damage the emissions control system.
- An out-of-tune engine or certain fuel or ignition malfunctions can cause the catalytic converter to overheat. If you notice a pungent burning odour or some light smoke, your engine may be out of tune or malfunctioning and may require immediate service. Contact an authorized dealer for service assistance.
- The use of fuel additives, which are now being sold as octane enhancers, is not recommended. Most of these products contain high concentrations of methanol. Fuel system damage or vehicle performance problems resulting from the use of such fuels or additives are not the responsibility of the manufacturer and may void or not be covered under the New Vehicle Limited Warranty.
NOTE:
Intentional tampering with the emissions control system can result in civil penalties being assessed against you.
2024 JEEP Wrangler Review, Price, Features And Mileage (Brochure)
FLUID CAPACITIES
| – | US | Metric |
| Fuel (Approximate) | ||
| All Engines | 13.5 gal | 51 L |
| Engine Oil With Filter | ||
| 2.0L Engine | 5 qt | 4.7 L |
| Cooling System | ||
| 2.0L Engine | 9 qt | 8.6 L |
| Includes heater and coolant recovery bottle filled to MAX level. | ||
ENGINE FLUIDS AND LUBRICANTS
| Component | Fluid, Lubricant, or Genuine Part |
|
Engine Coolant |
We recommend using Mopar® Antifreeze/Coolant 10 Year/150,000 Mile (240,000 km) Formula OAT (Organic Additive Technology) or equivalent meeting the requirements of the manufacturer Standard MS.90032. |
| Engine Oil | We recommend using Mopar® API SP/GF-6A Certified SAE 5W-30 Full Synthetic Engine Oil which meets the requirements of the manufacturer Material Standard MS-13340. Equivalent full synthetic 5W-30 API SP engine oil can be used but must have the API Donut trademark page 214. |
| CAUTION! | |
| Failure to use the recommended API SP/GF-6A or equivalent oil can cause engine damage not covered by the vehicle warranty. | |
| Fuel Selection | 87 Octane (R+M)/2 Method, 0-15% Ethanol. |
CHASSIS FLUIDS AND LUBRICANTS
| Component | Fluid, Lubricant, or Genuine Part |
| Automatic Transmission | Use only Mopar® ZF8&9 Speed ATF Automatic Transmission Fluid or equivalent. Failure to use the correct fluid may affect the function or performance of your transmission. |
| Power Transfer Unit (PTU) – If Equipped | We recommend using Mopar® Front Axle/PTU Synthetic Axle Lubricant SAE 75W-90 (API GL-5). |
| Rear Differential (RDM) – If Equipped | We recommend using Mopar® Rear Axle/RDM Synthetic Axle Lubricant SAE 75W-90 (API GL-5). |
| Brake Master Cylinder | We recommend using Mopar® DOT 3. |
FAQs
The 2024 Jeep Compass offers a standard 2.4-liter inline-4 engine.
The 2024 Jeep Compass delivers around 180 horsepower.
Torque output typically stands at approximately 175 lb-ft.
As of 2024, there may be optional engine configurations available, such as a turbocharged variant, which could offer higher horsepower and torque figures.
The 2024 Jeep Compass may come with a standard 6-speed manual transmission or an optional automatic transmission.
The automatic transmission likely features 9 or 10 gears for improved efficiency and performance.
It typically offers either front-wheel drive (FWD) or all-wheel drive (AWD) configurations.
The fuel economy may vary depending on the engine, transmission, and drivetrain configuration, but it generally achieves competitive fuel efficiency in its class.
The length, width, and height of the 2024 Jeep Compass may vary slightly, but it falls within the compact SUV segment, providing ample space for passengers and cargo.
It typically accommodates five passengers comfortably.
Interior features may include a touchscreen infotainment system, smartphone integration, premium audio options, and advanced safety features like lane departure warning and adaptive cruise control.
Trim levels may vary, but typical options include Sport, Latitude, Limited, and Trailhawk.
Standard safety features may include multiple airbags, traction control, stability control, and a suite of driver-assistance technologies like automatic emergency braking and blind-spot monitoring.
Towing capacity varies depending on the engine and drivetrain configuration but typically ranges from 1,000 to 2,000 pounds.
Yes, it may include features such as a panoramic sunroof, keyless entry and ignition, and a customizable digital instrument cluster.
It may come equipped with an independent suspension system for a smooth ride both on and off the road.
Useful Links
View full PDF: 2024 JEEP Wrangler Review, Price, Features And Mileage (Brochure)