Fuse and fuses box: 2017 Kia Soul EV | Fuse diagram Guide
It is essential to comprehend the fuse system and fuse box diagram in order to keep the 2017 Kia Soul EV electrically working. One essential part of the car is the fuse box, which contains a variety of fuses meant to safeguard different electrical circuits. These fuses protect vital parts from potential harm caused by electrical malfunctions, such as lights, power windows, and audio systems. The fuse diagram provides a thorough overview, outlining the function and amperage ratings of each fuse. It is frequently located in the owner’s manual or on the fuse box cover. With this information, owners are better equipped to recognize blown fuses and replace them, guaranteeing the smooth operation of the Kia Soul EV’s electrical systems and encouraging a dependable and safe driving experience.
2023 Kia Soul Specs, Price, Features, Mileage (Brochure)
FUSES
A vehicle’s electrical system is protected from electrical overload damage by fuses. This vehicle has 3 (or 4) fuse panels, one located in the driver’s side panel bolster, the other in the motor compartment near the battery. If any of your vehicle’s lights, accessories, or controls do not work, check the appropriate circuit fuse. If a fuse has blown, the element inside the fuse will melt. If the electrical system does not work, first check the driver’s side fuse panel. Always replace a blown fuse with one of the same rating. If the replacement fuse blows, this indicates an electrical problem. Avoid using the system involved and immediately consult an authorized Kia dealer.
Three kinds of fuses are used: micro mini type for lower amperage ratings, cartridge type, and multi fuse for higher amperage ratings.
WARNING – Fuse replacement
- Never replace a fuse with anything but another fuse of the same rating.
- A higher capacity fuse could cause damage and possibly a fire.
- Never install a wire or aluminum foil instead of the proper fuse – even as a temporary repair. It may cause extensive wiring damage and a possible fire.
- Replace the fuse with the ignition “OFF”, switch off of all electrical devices, and then separate the (-) terminal from the battery in a safe place.
- Do not arbitrarily modify or add electric wiring of the vehicle.
CAUTION – Fuse Replacement
Do not use a screwdriver or any other metal object to remove fuses because it may cause a short circuit and damage the system. Do not input any other objects except fuses or relays into fuse/relay terminals such as a driver or wiring. It may cause contact failure and system malfunction.
NOTICE
The actual fuse/relay panel label may differ depending on equipment/ options.
WARNING – Fuse fire
Do not remove fuses, relays, and terminals fastened with bolts or nuts. The fuses, relays, and terminals may be fastened incompletely, and it may cause a possible fire. If fuses, relays, and terminals fastened with bolts or nuts are blown, we recommend that you consult with an authorized Kia dealer.
WARNING – Electrical Fire
- Always ensure replacements fuses and relays are securely fastened when installed. Failure to do so can result in a vehicle fire.
- We recommend that you do not remove fuses, relays and terminals that are fastened with bolts or nuts. If they are not completely re-installed, such looseness may cause electrical arcing and a possible fire. If fuses, relays and terminals fastened with bolts or nuts need replacement, consult with an authorized Kia dealer.
Inner panel fuse replacement
- Turn the ignition switch and all other switches off.
- Open the fuse panel cover.
- Pull the suspected fuse straight out. Use the fuse puller provided on the motor compartment fuse panel cover.
- Check the removed fuse; replace it if it is blown. Spare fuses are provided in the motor compartment fuse panel.
- Push in a new fuse of the same rating, and make sure it fits tightly in the clips.
If it fits loosely, consult an authorized Kia dealer. If you do not have a spare, use a fuse of the same rating from a circuit you may not need for operating the vehicle, such as the power outlet fuse. If the headlights or other electrical components do not work and the fuses are OK, check the fuse panel in the motor compartment. If a fuse is blown, it must be replaced.
Fuse switch
Always, put the fuse switch at the ON position. If you move the switch to the OFF position, some items such as the audio and digital clock must be reset and the transmitter (or smart key) may not work properly.
NOTICE
If you need to park your vehicle for prolonged periods more than 1 month, move the transportation fuse switch to the OFF position to prevent the battery being discharged.
Motor compartment fuse replacement
- Turn the ignition switch and all other switches off.
- Remove the fuse panel cover by pressing the tab and pulling the cover up.
- Check the removed fuse; replace it if it is blown. To remove or insert the fuse, use the fuse puller in the motor compartment fuse panel.
- Push in a new fuse of the same rating, and make sure it fits tightly in the clips. If it fits loosely, consult an authorized Kia dealer.
CAUTION – Fuse panel covers
After checking the fuse panel in the motor compartment, securely install the fuse panel cover with using cover locking sound. If not, electrical failures may occur from water contact.
Multi fuse
If the multi fuse is blown, it must be removed as follows:
- Turn off the vehicle.
- Disconnect the negative battery cable.
- Remove the nuts shown in the picture above.
- Replace the fuse with a new one of the same rating.
- Reinstall in the reverse order of removal.
NOTICE
If the multi fuse is blown, consult an authorized Kia dealer.
Fuse/relay panel description
Inside the fuse/relay panel covers, you can find the fuse/relay label describing fuse/relay name and capacity.
✽ NOTICE
Not all fuse panel descriptions in this manual may be applicable to your vehicle. It is accurate at the time of printing. When you inspect the fuse panel in your vehicle, refer to the fuse panel label.
Instrument panel (Driver’s side fuse panel)
| Fuse Name | Fuse rating | Circuit Protected |
| POWER OUTLET 2 | 20A | Front Power Outlet |
| ACC | 10A | BCM, Mood Lamp Module, A/V & Navigation Head Unit, Smart Key Control Module, Power Outside Mirror Switch, E/R Junction Block (Power Outlet Relay) |
| POWER OUTLET 1 | 20A | Rear Power Outlet |
| DRL | 10A | BCM |
| MODULE 6 | 7.5A | Front Seat Warmer Module, Driver Air Ventilation Seat Control Module |
| WIPER FRT 1 | 25A | E/R Junction Block (Front Wiper Low Relay) |
| WIPER RR | 15A | Rear Wiper Motor, Multifunction Switch |
| MODULE 5 | 7.5A | BCM, Smart Key Control Module |
| WIPER FRT 2 | 10A | BCM, Multifunction Switch, PCB Block (Front Wiper High Relay) |
| HEATED STEERING | 15A | Clock Spring (Steering Wheel Heated) |
| A/CON | 7.5A | A/C Control Module, Heater Assembly (Cluster Ionizer) |
| HEATED MIRROR | 10A | A/C Control Module, Driver/Passenger Power Outside Mirror, Rear Defogger |
| TAIL GATE OPEN | 15A | Tail Gate Open Relay |
| S/HEATER FRT | 20A | Front Seat Warmer Module, Driver Air Ventilation Seat Control Module |
| DR LOCK | 20A | Door Lock Relay, Door Unlock Relay, Two Turn Unlock Relay |
| A/BAG IND | 7.5A | Instrument Cluster |
| AIR BAG | 15A | SRS Control Module |
| MODULE 4 | 10A | Electro Chromic Mirror, Front Seat Warmer Module, Driver Air Ventilation Seat Control Module |
| STOP LAMP | 15A | Stop Signal Electronic Module |
| MODULE 7 | 10A | Sport Mode Switch, ICM Relay Box |
| S/HEATER RR | 20A | Rear Seat Warmer Module |
| P/WINDOW RH | 25A | Power Window RH Relay |
| P/WINDOW LH | 25A | Power Window LH Relay, Driver Safety Power Window Module |
| Fuse Name | Fuse rating | Circuit Protected |
| MODULE 1 | 10A | BCM |
| IBAU | 10A | Integrated Brake Actuation Unit |
|
MODULE 2 |
10A |
Tire Pressure Monitoring Module, Crash Pad Switch, Center Fascia Switch, Electronic Parking Brake Module, Stop Lamp Switch, Rear Parking Assist Sensor RH/LH (IN/OUT), Front Parking Assit Sensor LH/RH (OUT/IN) |
| MODULE 3 | 10A | ATM Lever Indicator, Multipurpose Check Connector, PCB Block (IG3 #4 Relay) |
| PDM 3 | 7.5A | Smart Key Control Module |
| IOD 2 | 15A | A/V & Navigation Head Unit |
| IOD 3 | 7.5A | ICM Relay Box (Outside Mirror Folding Relay, Outside Mirror Unfolding Relay) |
| CLUSTER | 10A | Instrument Cluster |
| IG1 | 15A | EPCU |
| IOD 4 | 7.5A | Instrument Cluster, Tire Pressure Monitoring Module, Data Link Connector, Multipurpose Check Connector, A/C Control Module, BCM |
| FOG LAMP REAR | 10A | Rear Fog Lamp Control Block |
| SUNROOF 2 | 20A | SUNROOF_MOTOR (POWER) |
| SUNROOF 1 | 20A | SUNROOF_MOTOR (POWER) |
| MDPS | 7.5A | MDPS Unit |
| START | 7.5A | Transaxle Range Switch |
| IOD 1 | 7.5A | Overhead Console Lamp, Vanity Lamp LH/RH, Room Lamp, Glove Box Lamp, Luggage Lamp |
| PDM 2 | 7.5A | Smart Key Control Module |
| PDM 1 | 20A | Smart Key Control Module |
| BRAKE SWITCH | 10A | Smart Key Control Module, Stop Lamp Switch |
Motor compartment fuse panel
| Fuse Name | Fuse rating | Circuit Protected |
| MDPS | 80A | MDPS Unit |
| ALT | 150A | Alternator |
| B+1 | 50A | Smart Junction Block (Fuse – (S/HEATER FRT, TAIL GATE OPEN, DR LOCK, P/WINDOW LH, P/WINDOW RH, MODULE 7)) |
| B+2 | 50A | Smart Junction Block (Fuse – (STOP LAMP) Arisu-LT2) |
| B+3 | 50A | Smart Junction Block (Fuse – (PDM 1, PDM 2, BRAKE SWITCH, Leak Current Autocut Device) IPS1, Arisu-LT1) |
| IG2 | 40A | PCB Block (Button Start (IG2) Relay) |
| POWER OUTLET | 20A | Power Outlet Relay |
| OBC | 10A | OBC Unit, Rear Heated Relay |
| BMS | 10A | BMS Control Module |
| EPCU | 20A | EPCU |
| CHARGER 2 | 10A | Normal Charge Port Lmap |
| C/FAN | 40A | COOLING FAN 1 Relay, COOLING FAN 2 Relay |
| RR HTD | 40A | Rear Heated Relay |
| IBAU 2 | 30A | Integrated Brake Actuation Unit |
| IBAU 1 | 40A | Integrated Brake Actuation Unit |
| Fuse Name | Fuse rating | Circuit Protected |
| IG1 | 40A | Button Start (ACC) Relay, Button Start (IG1) Relay |
| BLOWER | 40A | Blower Relay |
| IG3 1 | 30A | IG3 #1/#2/#3/#4/#5 Relay |
| EPB 1 | 30A | Electronic Parking Brake Module |
| EPB 2 | 30A | Electronic Parking Brake Module |
| IG3 2 | 10A | Blower Relay, A/C Control Module, A/C Compressor, E/R Junction Block (Cooling Fan 1/2 Relay), Heater Assembly (PTC Heater) |
| CHARGER 1 | 10A | OBC Unit, BMS Control Module |
| EWP | 10A | Electronic Water Pump |
| IG3 3 | 15A | EPCU, Transaxle Range Switch, A/V & Navigation Head Unit, Instrument Cluster |
| HORN | 15A | Horn Relay |
| B/UP LAMP | 10A | Transaxle Range Switch, EPCU |
| BATTERY C/FAN | 25A | Battery C/FAN Relay |
| No. | Relay Name | Type |
| E41 | Power Outlet Relay | PLUG MICRO |
| E42 | C/FAN 1 Relay | PLUG MICRO |
| E43 | RR HTD Relay | PLUG MICRO |
| E44 | C/FAN 2 Relay | PLUG MINI |
Motor compartment fuse panel (Battery terminal cover)
NOTICE
The actual fuse/relay panel label may differ depending on equipment/ options.
FAQs
The fuse box in the 2017 Kia Soul EV is typically located in accessible areas such as the driver’s side dashboard or the engine compartment.
Inspect the fuses visually or use a multimeter to check for continuity. A blown fuse will have a broken or melted metal strip.
Basic tools like a fuse puller or needle-nose pliers and replacement fuses with the correct amperage.
No, it’s crucial to replace a blown fuse with one of the same amperage rating to prevent damage to the electrical system.
Fuses protect various electrical components, including lights, power windows, audio system, and other accessories.
The fuse box diagram provides a map of each fuse, indicating its purpose and amperage rating, aiding in the identification of specific fuses.
Some vehicles may include spare fuses in the fuse box.
Regularly inspect your fuses if you notice electrical issues. Additionally, it’s a good practice during routine maintenance checks.
It depends on the affected component. While some may be non-essential, others, like headlights, may compromise safety. It’s advisable to replace blown fuses promptly.
It illustrates the location and purpose of each fuse, aiding in identification.
If the problem persists, there may be an underlying electrical issue, and it’s recommended to seek professional assistance.
While some issues are unavoidable, practicing proper electrical maintenance and addressing problems promptly can help prevent blown fuses.
While some issues can be resolved by replacing fuses, resetting the fuse box might not be necessary.