Fuses and fuse box Diagram: 2017 Kia Sedona User Manual
Maintaining and troubleshooting the 2017 Kia Sedona’s electrical systems requires an understanding of the fuses and fuse box diagram. The fuse box serves as a control center for the car, holding multiple fuses that safeguard various circuits. These fuses are essential for protecting electrical malfunctions from damaging devices like lights, power windows, and music systems. The fuse box diagram offers a detailed overview of each fuse’s function and amperage rating. It is usually located in the owner’s manual or on the fuse box cover. With this knowledge, owners can ensure that the electrical systems in their Kia Sedona operate as best they can by correctly identifying and replacing blown fuses. A thorough understanding of the fuses and their schematic is essential, whether fixing a malfunction or performing routine maintenance. to preserve the vehicle’s electrical integrity.
2023 kia Sorento Hybrid Specs, Price, Features, Mileage and Review
FUSES
A vehicle’s electrical system is protected from electrical overload damage by fuses. This vehicle has 2 (or 3) fuse panels, one located in the driver’s side panel bolster, the other in the engine compartment near the battery. If any of your vehicle’s lights, accessories, or controls do not work, check the appropriate circuit fuse. If a fuse has blown, the element inside the fuse will melt. If the electrical system does not work, first check the driver’s side fuse panel. Always replace a blown fuse with one of the same rating. If the replacement fuse blows, this indicates an electrical problem. Avoid using the system involved and immediately consult an authorized Kia dealer. Three kinds of fuses are used: blade type for lower amperage rating, cartridge type, and multi fuse for higher amperage ratings.
WARNING – Fuse replacement
- Never replace a fuse with anything but another fuse of the same rating.
- A higher capacity fuse could cause damage and possibly a fire.
- Never install a wire or aluminum foil instead of the proper fuse – even as a temporary repair. It may cause extensive wiring damage and a possible fire.
- Do not arbitrarily modify or add on electric wiring of the vehicle.
CAUTION
Do not use a screwdriver or any other metal object to remove fuses because it may cause a short circuit and damage the system.
NOTICE
- The actual fuse/relay panel label may differ depending on equipment/ options.
- When replacing a fuse, turn the ignition “OFF” and turn off the switches of all electrical devices then remove the battery (-) terminal.
- The actual fuse/relay panel label may differ from the equipped items.
Inner panel fuse replacement
- Turn the ignition switch and all other switches off.
- Open the fuse panel cover.
- Pull the suspected fuse straight out. Use the removal tool provided on the engine compartment fuse panel cover.
- Check the removed fuse; replace it if it is blown. Spare fuses are provided in the engine compartment fuse panel.
- Push in a new fuse of the same rating, and make sure it fits tightly in the clips.
If it fits loosely, consult an authorized Kia dealer. If you do not have a spare, use a fuse of the same rating from a circuit you may not need for operating the vehicle, such as the power outlet fuse. If the headlights or other electrical components do not work and the fuses are OK, check the fuse panel in the engine compartment. If a fuse is blown, it must be replaced.
Fuse switch
Always, put the fuse switch at the ON position. If you move the switch to the OFF position, some items such as the audio and digital clock must be reset and the transmitter (or smart key) may not work properly. When the switch is Off, the caution will be displayed on the instrument cluster. Always place the fuse switch in the ON position while driving the vehicle.
Engine compartment fuse replacement
- Turn the ignition switch and all other switches off.
- Remove the fuse panel cover by pressing the tab and pulling the cover up. When the blade-type fuse is disconnected, remove it by using the clip designed for changing fuses located in the engine room fuse box. Upon removal, securely insert reserve fuse of equal quantity.
- Check the removed fuse; replace it if it is blown. To remove or insert the fuse, use the fuse puller in the engine compartment fuse panel.
- Push in a new fuse of the same rating, and make sure it fits tightly in the clips. If it fits loosely, consult an authorized Kia dealer.
CAUTION – Fuse panel covers
After checking the fuse panel in the engine compartment, securely install the fuse panel cover. If not, electrical failures may occur from water contact.
Main fuse
If the main fuse is blown, it must be removed as follows:
- Turn off the engine.
- Disconnect the negative battery cable.
- Remove the nuts shown in the picture above.
- Replace the fuse with a new one of the same rating.
- Reinstall in the reverse order of removal.
Fuse/relay panel description
Inside the fuse/relay panel covers, you can find the fuse/relay label describing fuse/relay name and capacity.
✽ NOTICE
Not all fuse panel descriptions in this manual may be applicable to your vehicle. It is accurate at the time of printing. When you inspect the fuse panel in your vehicle, refer to the fuse panel label.
Inner fuse panel
|
Fuse Name |
Fuse rating |
Circuit Protected |
|
ECU |
10A |
PCM, Injector Drive Box, Smart Key Control Module/Immobilizer Module |
|
MODULE4 |
7.5A |
Head Lamp Leveling Device Actuator LH/RH, Multipurpose Check Connector, Bezel Switch, MTS Module, Electro Chromic, A/V & Navigation Head Unit, A/C Control Module, Heater Control Module, Passenger Ventilation Seat Control Module, Driver IMS Control Module, Rear Seat Heater Control Module, Auto Head Leveling Device Module, ATM Shift Lever ILL. |
|
MODULE3 |
10A |
LDWS Module, Stop Lamp, Front Parking Assist Sensor LH/RH, Front Parking Assist Sensor LH/RH (CENTER), Rear Parking Assist Buzzer, Rear Parking Assist Sensor LH/RH, Rear Parking Assist Sensor LH/RH (CENTER), Blind Spot Detection Radar LH/RH |
|
MODULE5 |
7.5A |
Rear Seat Heater Control Module, AC Inverter Unit, Heater Control Module, Passenger Ventilation Seat Control Module, Portable Lamp, Around View Unit |
|
MODULE6 |
7.5A |
BCM, Smart Key Control Module |
|
WIPER RR |
15A |
Rear Wiper Motor, Wiper RR Relay |
|
CLUSTER |
7.5A |
Instrument Cluster |
|
A/CON1 |
7.5A |
A/C Control Module, Ionizer, Rear A/C Control Switch, PCB Block (Blower Relay, Blower RR Relay) |
|
MEMORY2 |
10A |
Data Link Connector, Instrument Cluster, Digital Clock, A/C Control Module, BCM, Power Sliding Door Module, Driver Door Module, Passenger Safety Power Window Switch, Driver IMS Control Module |
|
SMART KEY3 |
10A |
Start/Stop Button Switch, Immobilizer Module |
|
POWER OUTLET2 |
20A |
Console Power Outlet |
|
A/BAG IND |
7.5A |
Instrument Cluster, Digital Clock, A/C Control Module(Auto) |
|
WASHER |
15A |
Multifunction Switch, BCM |
|
HEATED STEERING |
15A |
Clock Spring (Steering Wheel Switch) |
|
MEMORY1 |
10A |
Clock Spring (Steering Wheel Switch) |
|
SMART KEY1 |
25A |
Smart Key Control Module |
|
POWER OUTLET3 |
20A |
Rear Power Outlet |
|
MODULE2 |
7.5A |
BCM, Driver Door Module, Passenger Door Module |
|
Fuse Name |
Fuse rating |
Circuit Protected |
|
MULTIMEDIA |
15A |
USB Charger #1/#2, MTS Module, Audio, A/V & Navigation Head Unit |
|
S/ROOF FRT |
20A |
Front Sunroof Motor |
|
AMP |
25A |
AMP |
|
IG1 |
20A |
PCB BLOCK (Fuse – ABS3, TCU, MDPS, CRUISE) |
|
SMART KEY2 |
7.5A |
Smart Key Control Module |
|
INTERIOR LAMP |
10A |
Portable Lamp, Overhead Console Lamp, Cargo Lamp, Front Vinity Lamp Switch LH/RH, Glove Box Lamp, Key Warning Switch |
|
START |
7.5A |
With IMMO./Smart Key : Transmission Range Switch, W/O IMMO. : PCB Block (B/Alarm Relay) |
|
S/ROOF RR |
25A |
Rear Sunroof Motor |
|
DOOR LOCK |
20A |
Tail Gate Relay, Door Lock/Unlock Relay, Sliding Door Lock/Unlock Relay |
|
FOG LAMP REAR |
10A |
– |
|
MODULE1 |
10A |
Audio, A/V & Navigation Head Unit, Around View Unit, BCM, Overhead Console Lamp, MTS Module, Digital Clock, USB Charger #1/#2 |
|
AIR BAG |
15A |
SRS Control Module, Passenger Occupant Detection Sensor |
|
A/CON2 |
7.5A |
A/C Control Module, Blower Resistor (Manual) |
|
HEATED MIRROR |
10A |
Passenger Power Outside Mirror, A/C Control Module |
|
BRAKE SWITCH |
7.5A |
Smart Key Control Module, Stop Lamp Switch |
|
P/WINDOW LH |
25A |
Driver Safety Window Module, Driver Door Module, Rear Power Window Switch LH, Rear Safety Power Window Switch LH, Rear Safety Power Window Module LH |
|
MODULE7 |
7.5A |
Key Inter Lock Solenoid, Fuel Lid Switch, ATM Lever Switch, Rear A/C Control Switch, Electro Chromic Mirror |
|
POWER OUTLET1 |
20A |
Front Power Outlet |
|
P/SEAT (DRV) |
30A |
Driver Manual Switch, Driver Lumbar Support Switch, Driver IMS Control Module |
|
P/WINDOW RH |
25A |
Passenger Safety Window Module, Passenger Power Window Motor, Passenger Door Module, Rear Power Window Switch RH, Rear Safety Power Window Switch RH, Rear Safety Power Window Module RH |
|
S/HEATER FRT |
20A |
Heater Control Module, Passenger Ventilation Seat Control Module |
|
72 |
||
Engine compartment fuse panel
Engine compartment fuse panel
|
Fuse Name |
Fuse rating |
Circuit Protected ] |
|
ABS1 |
40A |
ESC Module, Multipurpose Check Connector |
|
ABS2 |
40A |
ESC Module |
|
INVERTER |
30A |
AC Inverter Unit |
|
IDB |
15A |
Injector Drive Box |
|
S/HEATER RR |
25A |
Rear Seat Heater Control Module |
|
FOG LAMP FRONT |
15A |
Fog Lamp Front Relay |
|
P/SEAT (PASS) |
30A |
Passenger Manual Switch |
|
COOLING FAN1 |
60A |
Cooling Fna1 Relay |
|
COOLING FAN2 |
50A |
Cooling Fna2 Relay |
|
B+4 |
50A |
Smart Junction Block (IPS Control Module, IPS3, IPS4, IPS5, IPS6, Fuse – MODULE7) |
|
POWER TAIL GATE |
40A |
Power Tail Gate Module |
|
B+2 |
50A |
Smart Junction Block (Leak Current Autocut Device, Fuse – P/SEAT DRV, P/WDW RH) |
|
IG1 |
40A |
With Smart Key : PDM1/2 Relay, W/O Smart Key : Ignition Switch |
|
IG2 |
40A |
Start Relay, With Smart Key : PDM3 Relay, W/O Smart Key : Ignition Switch, |
|
B+1 |
50A |
Smart Junction Block (IPS Control Module, Fuse – P/WDW LH, S/HEATER FRT, DR LOCK) |
|
TRAILER |
30A |
Trailer Power Outlet |
|
B+5 |
50A |
Smart Junction Block (Motor Driver, Power Outlet Relay, Fuse – S/ROOF FRT, S/ROOF RR, BRAKE SWITCH, SMART KEY1, SMART KEY3, AMP) |
|
PSD1 |
40A |
Power Sliding Door Module |
|
PSD2 |
40A |
Power Sliding Door Module |
|
B+3 |
50A |
Smart Junction Block (IPS Control Module, IPS1, IPS2) |
|
MDPS |
125A |
MDPS Unit (Rack) |
|
Fuse Name |
Fuse rating |
Circuit Protected |
|
BLOWER RR |
40A |
Blower RR Relay |
|
BLOWER |
40A |
Blower Relay |
|
SENSOR (B+) |
10A |
Battery Sensor |
|
B/ALARM HORN |
10A |
B/Alarm Horn Relay |
|
FUEL LID |
10A |
Fuel Lid Relay |
|
DEICER |
15A |
Deicer Relay |
|
FUEL PUMP |
15A |
Fuel Pump Relay |
|
HORN |
15A |
Horn Relay |
|
WIPER |
25A |
Front Wiper (Low) Relay |
|
ECU3 |
30A |
Engine Control Relay, Fuse – ECU1 |
|
REAR HEATED |
40A |
Rear Heated Relay |
|
TCU |
15A |
Transmission Range Switch |
|
MDPS |
10A |
MDPS Unit (Rack) |
|
CRUISE |
10A |
Smart Cruise Control Radar |
|
B/UP LAMP |
10A |
Audio, A/V & Navigation Head Unit, Rear Combination Lamp (IN) LH/RH, Electro Chromic Mirror |
|
A/CON |
7.5A |
Rear A/C Control Switch, A/C Control Module |
|
ECU1 |
15A |
PCM |
|
ABS3 |
7.5A |
ESC Module, Steering Angle Sensor |
|
ECU2 |
10A |
Injector Drive Box |
|
SENSOR1 |
15A |
Oxygen Sensor #1/#2/#3/#4, PCM, E/R Junction Box (Cooling Fan1 Relay) |
|
SENSOR2 |
10A |
PCM, Canister Close Valve, Variable Intake Solenoid Valve #1/#2, Purge Control Solenoid Valve, Oil Control Valve #1/#2 (Intake), Oil Control Valve #1/#2 (Exhaust) |
|
SENSOR3 |
10A |
PCM, Fuel Pump Relay |
|
IGN COIL |
20A |
Ignition Coil #1~#6, Condensor #1/#2 |
FAQs
The check engine light signals a potential issue with the vehicle’s engine or emissions system. It’s recommended to have the vehicle inspected by a professional.
The tire pressure warning light indicates low tire pressure. Check and adjust the tire pressure to the recommended levels.
The battery light suggests an issue with the charging system. Consult a mechanic to assess the battery and alternator.
The ABS warning light indicates a potential issue with the anti-lock braking system. A professional inspection is advised.
The oil pressure warning light signals low oil pressure. Check the oil level and seek professional assistance if needed.
The airbag light indicates a problem with the airbag system. Immediate attention from a qualified technician is necessary.
The temperature warning light signals an overheating engine. Safely pull over, turn off the engine, and seek assistance.
The ESC light indicates the activation of the Electronic Stability Control system, helping maintain stability during challenging driving conditions.
The fuel level warning light indicates a low fuel level. Refuel as soon as possible to avoid running out of gas.
The windshield washer fluid light signals low washer fluid. Refill the reservoir to ensure clear visibility.
The cruise control light indicates that the cruise control system is active. It will turn off when the system is not in use.
The key warning light may indicate an issue with the vehicle’s key recognition system. Check the key battery and consult the owner’s manual for troubleshooting.
The parking brake light may indicate the parking brake is engaged or there’s a malfunction. Ensure the parking brake is fully released; if the light persists, seek professional assistance.
Regularly glance at the dashboard indicators, especially during the vehicle’s startup, and address any illuminated warning lights promptly.
Some lights may be reset by following procedures outlined in the owner’s manual, but it’s advisable to consult a professional for accurate diagnosis and resolution.
Regularly check fluid levels, adhere to scheduled maintenance, and address any unusual sounds or behaviors promptly to prevent potential issues that trigger warning lights.
Useful Links
2023 kia Sorento Hybrid Specs, Price, Features, Mileage and Review