2020
Kia Niro Instrument Cluster | How To Use
The Kia Niro 2020 Instrument Cluster, which acts as the hub of your driving experience, skillfully combines innovation and functionality. This innovative display makes sure you stay connected and informed while driving by giving you quick access to vital vehicle information through its svelte design and user-friendly layout. The instrument cluster of the Kia Niro 2020 offers a sophisticated yet user-friendly interface that enhances convenience and safety throughout your journey, from real-time performance metrics to navigation assistance.
INSTRUMENT CLUSTER
Type A for Hybrid
Type B for Hybrid
The actual cluster and contents of the LCD display in the vehicle may differ from the illustration.
- Hybrid system gauge
- Fuel gauge
- Speedometer
- Warning and indicator lights
- LCD display
- Battery SOC (State of Charge) gauge
- Distance To Empty
For more details, refer to the “Gauges” in this chapter.
Instrument Cluster Control
Adjusting Instrument Cluster Illumination
The brightness of the instrument panel illumination is changed by pressing the illumination control but-ton (“+” or “-”) when the ignition switch or ENGINE START/STOP but-ton is ON, or the taillights are turned on.
If you hold the illumination control button (“+” or “-”), the brightness will be changed continuously.
If the brightness reaches to the maximum or minimum level, an alarm will sound.
Gauges
Speedometer
The speedometer indicates the speed of the vehicle and is calibrated in miles per hour (mph) and/or kilo-meters per hour (km/h).
Tachometer (if equipped)
The tachometer indicates the approximate number of engine revolutions per minute (rpm).
When moving the shift lever to the “S” (SPORT) mode, the engine tachometer is displayed while switching to SPORT mode.
Use the tachometer to select the correct shift points and to prevent lugging and/or over-revving the engine.
CAUTION
Do not operate the engine with-in the tachometer’s RED ZONE. This may cause severe engine damage.
Hybrid System Gauge
The hybrid system gauge indicates whether the current driving condition is fuel efficient or not.
- CHARGE : Shows that the energy made by the vehicle is being converted to electrical energy.(Regenerated energy)
- ECO : Shows that the vehicle is being driven in an Eco-friendly manner.
- POWER : Shows that the vehicle is exceeding the Eco-friendly range.
NOTICE
The “EV” indicator comes on or off based on the hybrid system gauge.
- “EV” indicator ON : Vehicle is using the electric motor or the gasoline engine is stopped.
- “EV” indicator OFF : Vehicle is using the gasoline engine.
Hybrid Battery SOC
(State of Charge) Gauge
This gauge indicates the remaining hybrid battery power. If the SOC is near the “L (Low)” level, the vehicle automatically operates the engine to charge the battery.
However, if the Service Indicator ( ) and Malfunction Indicator Lamp (MIL)( ) turn on when the SOC gauge is near the “L (Low)” level, have your vehicle inspected by an authorized Kia dealer.
NOTICE
Never try to start the vehicle if the fuel tank is empty. In this condition, the engine cannot charge the high voltage battery of the hybrid system. If you try to start the vehicle when the fuel is empty, the high voltage battery will become discharged and be damaged.
Plug-in hybrid mode indicator
- CD (Charge Depleting, Electric) mode
The high-voltage (hybrid) battery is used to drive the vehicle.
- AUTO mode
The AUTO mode will be automatically selected from either from Electric (CD) mode or Hybrid (CS) mode by the system according to the driving condition.
- CS (Charge Sustaining, Hybrid) mode
The high-voltage (hybrid) battery and gasoline engine is used to drive the vehicle.
A corresponding message is displayed to indicate the selected mode.
Fuel Gauge
This gauge indicates the approximate amount of fuel remaining in the fuel tank.
NOTICE
- The fuel tank capacity is given in chapter 8.
- The fuel gauge is supplemented by a low fuel warning light which will illuminate when the fuel tank is nearly empty.
- On inclines or curves, the fuel gauge pointer may fluctuate or the low fuel warning light may come on earlier than usual due to the movement of fuel in the tank.
NOTICE
Fuel gauge
Running out of fuel can expose vehicle occupants to danger. You must obtain additional fuel as soon as possible after the warning light comes on or when the gauge indicator comes close to the “E (Empty)” level.
CAUTION
Low fuel
Avoid driving with an extremely low fuel level. Running out of fuel could cause the engine to misfire, damaging the catalytic converter.
NOTICE
Fuel display may not be accurate if vehicle is being fueled while in an incline.
Distance to empty
- The distance to empty is the estimated distance the vehicle can be driven with the remaining fuel.
- Distance range : 1 ~ 9,999 mi. or 1 ~ 9,999 km
- If the estimated distance is below 1 mi.(1 km), the trip computer will display “—-” as distance to empty.
- If the level of the remaining fuel is more than three-quarters, more than 0.8 gallons (3 liters) of fuel must be refilled for the fuel gauge to change. In other cases, more than 1.6 gallons (6 liters) of fuel must be refilled for the vehicle to change the fuel gauge.
NOTICE
- If the vehicle is not on level ground or the battery power has been interrupted, the distance to empty function may not operate correctly.
- The distance to empty may differ from the actual driving distance as it is an estimate of the available driving distance.
- The fuel economy and distance to empty may vary significantly based on driving conditions, driv-ing habits, and condition of the vehicle.
Odometer
The odometer Indicates the total dis-tance that the vehicle has been driv-en and should be used to determine when periodic maintenance should be performed.
- Odometer range : 0 ~ 999,999 miles or 1,599,999 kilometers.
This gauge indicates the current out-side air temperatures by 1°F (1°C).
Temperature range : -40 ~ 140°F (-40
The temperature unit (from °C to °F or from °F to °C) can be changed by using the “User Settings” mode of the LCD display.
For more details, refer to “LCD dis-play” in this chapter.
Dual clutch transmission shift indicator
This indicator displays which shift lever is selected.
- Park 😛
- Reverse : R
- Neutral : N
- Drive 😀
- Sport mode : S
FAQs
Vital vehicle information, such as speed, fuel level, temperature, odometer readings, trip information, and warnings, are displayed on the instrument cluster.
Yes, there is usually some degree of customization available with the instrument cluster. These include changing the layout, the preferred information displayed, and occasionally even the color themes.
The Kia Niro 2020’s instrument clusters are typically operated by buttons or knobs on the dashboard or steering wheel rather than a touchscreen.
Yes, it typically has a real time fuel economy display that lets drivers check their MPG and other efficiency indicators.
Indeed, certain models incorporate navigation prompts into the instrument cluster to help with directions without requiring the driver to take their eyes off the road.
When maintenance is needed, the cluster usually alerts the driver by displaying warning lights or service indicators.
Indeed, most instrument clusters have a night mode or adjustable brightness for improved visibility when driving at night.
Certain models of instrument clusters may show notifications or information related to smartphones, even though the cluster itself does not pair with a smartphone directly.
It frequently displays alerts pertaining to safety, like tire pressure monitoring, seatbelt reminders, and warning lights for possible problems.
The instrument cluster typically provides very accurate readings by using sensors and vehicle data to provide exact information.
Yes, the instrument cluster frequently displays the battery charge level and current usage data in hybrid or electric vehicles.
Yes, you can usually reset fuel economy information, trip information, and other parameters by going into the cluster’s settings.
It is advised that you troubleshoot any issues you may encounter by referring to the vehicle manual or obtaining assistance from authorized service centers.
Many models accommodate a variety of user preferences by supporting multiple languages in the display settings.
Frequent updates or recalibration are usually not necessary, but authorized service centers may occasionally offer software updates for improved functionality or fixes.
Useful Links
View Full PDF: Kia Niro 2020 User Manual|Auto User Guide
Kia Niro 2020 Fuses and Fuse Box