Kia Sedona 2020 Windows User Manual

Introduction

The windows of the Kia Sedona 2020 are designed with convenience, comfort, and safety in mind. With power-operated windows, intuitive controls, and a range of features, the Kia Sedona 2020 aims to enhance the overall driving experience for both the driver and passengers. Whether you’re looking to let in fresh air, enjoy the view, or ensure privacy, the windows of the Kia Sedona 2020 provide flexibility and functionality. From power controls to advanced safety features, let’s explore the impressive window system of the Kia Sedona 2020.

POWER SLIDING DOOR AND POWER LIFTGATE (IF EQUIPPED)

1. Left power sliding door control button
2. Right power sliding door control button
3. Power liftgate control button*
4. Power door ON/OFF button
5. Power sliding door control button on the outside handle

*: if equipped

The power sliding doors and power liftgate can be opened and closed automatically with the folding key or smart key, the main control buttons on the overhead console or the sub control buttons on the center pillar trim and the liftgate.
When the power door ON/OFF but-ton is OFF (depressed), the power sliding door and power liftgate can be opened and closed manually by pulling the door handles from inside or outside vehicle.

WARNING
Unattended children/pets
Never leave children or animals unattended in your vehicle. Children or animals might operate the power sliding door or power liftgate that could result in injury to themselves or others or damage to the vehicle.

NOTICE
If the power sliding door is open approximately 6 hours, the ECU will enter Sleep mode to conserve battery power and the door might not close automatically. Close the door or lift-gate manually and then operate the door with the power operating system.

NOTICE
In cold and wet climates, power sliding doors and liftgate may not work properly due to freezing conditions.

NOTICE
When the sliding doors are opened manually (power OFF), more effort will be required to open and close than on non-power sliding doors.

NOTICE

• The power sliding door and power liftgate can be operated when the engine is not running. However the power operation consumes large amounts of vehicle electric power. To prevent the battery from being discharged, do not operate them excessively.
  To prevent the battery from being discharged, do not leave the power sliding door and power liftgate at open position for a long lime.
  When jacking up the vehicle to change a tire or repair the vehicle, do not operate the power sliding door or power liftgate. This could cause the power sliding door or power liftgate to operate improperly.

CAUTION
Operating sliding door/liftgate
Do not apply excessive force while operating the power sliding door or power liftgate. This could cause damage to the power sliding door or power lift-gate.

Automatic stop and reversal
If the power opening or closing is blocked by an object or part of the body, the power sliding door and power liftgate will detect the resistance, chime 3 times, and then either stop or move to the full open position.
However, if the resistance is weak such as an object that is thin or soft, or the door is near latched position, the automatic stop and reversal may not detect the resistance and closing operation will continue. Also, if the power sliding door or power liftgate is forced by strong impact, the automatic stop and reversal may operate.
If the automatic stop and reversal feature operates continuously more than twice during one opening or closing operation, the power sliding door or power liftgate may stop at that position. At this time, close the doors manually and operate the door automatically again.

WARNING
The automatic stop and reversal feature is a supplemental feature. Do not solely rely on this function when closing the sliding door. Make sure that no objects or body parts are in the way of the sliding door before closing it.

How to reset the power sliding door and power liftgate

If the battery has been discharged or disconnected, the related fuse has been replaced or disconnected, and the power sliding door or power lift-gate doesn’t work properly, the power sliding door and power liftgate must be reset as follows:

For power sliding door

1. Put the shift lever in the P (Park).
2. Change the position of fuse switch to OFF on the driver’s side fuse panel and change the position of fuse switch to ON after 1 minute.
3. Close the sliding door manually.
4. Open the sliding door completely using the transmitter or main control button on the overhead console.
5. Close the sliding door completely using the transmitter or main control button on the overhead console.

If the power sliding door or power lift-gate doesn’t work properly after above procedure, have the system checked by an authorized Kia dealer.

For power liftgate

1. Put the shift lever in P (Park).
2. Press the liftgate handle switch and liftgate close button at the same time for more than 3 seconds. (the chime will sound).
3. Close the liftgate manually.
4. Open the liftgate using the liftgate handle switch and allow it to fully open.
5. After fully opening, the liftgate will complete initialization and lights will flash twice indicating reset complete.

If the power liftgate does not work properly after the above procedure, have the system checked by an authorized Kia dealer.

Power door ON/OFF button

When the power door ON/OFF but-ton is ON (not depressed), the power sliding door and power liftgate can be controlled with the sub control buttons on the center pillar trim or lift-gate. Also, the doors can be opened and closed automatically by pulling the inside or outside door handles.

NOTICE
Do not allow children to play with the power sliding door or power lift-gate. Keep the power door ON/OFF button in the OFF (depressed) position when not in use.

NOTICE
Close the sliding door and liftgate, and keep the power door ON/OFF button in the OFF (depressed) position before washing the vehicle in an automatic car wash.

NOTICE
When the sliding doors and power liftgate are opened manually (power OFF), more effort will be required to open and close than on non-power sliding doors and non-power liftgate.

Power sliding Door operation

• Push the corresponding main control button on the overhead con-sole to open or close the power sliding door.
  However, the power sliding door will not open with the main control button when all power sliding doors and power taligate are locked and closed.
  
• When the power door ON/OFF button is ON (not depressed), do as follows to open or close the power sliding doors:
  • Push the corresponding sub control button on the center pillar trim.
  • Push the corresponding sub control button on the out side handle.
  • Pull the door handle from inside or outside vehicle.
  • If the sub control button is pushed while the door is locked or child safety lock is engaged, the chime sounds once, and the power sliding door will not open.
  • If the door handle is pulled from inside or outside while the door is locked or child safety lock is engaged, the power sliding door will not open. However, the power sliding door can be opened by pushing the corresponding sub control button on the out side handle while the door is unlocked and child safety lock is engaged.
• When the power door ON/OFF button is OFF (depressed), the power sliding door cannot be controlled with the sub control buttons or door handles, and if the sub control but-ton is pushed, chime sounds once. However, the doors can be opened and closed manually by pulling the door handles from inside or out-side vehicle.
• On a steep grade, the power sliding door will slide faster when closing. And the drive unit motor may operate additionally for a moment after the door is closed. This is a normal operation to ensure door closing, not a malfunction.

WARNING
Rear door locks
Use the rear door safety locks whenever children are in the vehicle. If a child accidently opens the rear doors while the vehicle is moving, they may fall out.

When the rear passenger operates the power sliding door, make sure there are no people or objects around the door, and have all occupants get in or out of the vehicle after the door is open fully and stopped. Let the rear passengers get in or out of the vehicle after the door is open fully. Sudden closing could cause a serious injury. Close the door by pulling the door handle after the door is open fully. Do not pull the door handle while rear passengers are getting in or out. The door could suddenly close by itself and cause a serious injury. It takes about 5 seconds for the power sliding door to close and latch completely.

WARNING
Power sliding door

Do not begin to accelerate before the door closes and latches completely. If the door is not completely closed while the vehicle is moving, the door can open and passengers can fall out of the vehicle.

• The left power sliding door cannot be opened while the fuel filler lid is open fully. If the main or sub control button is pushed, the chime sounds once. Also, if the fuel filler lid open button is pushed while the left power sliding door is opening, the chime sounds 3 times.

NOTICE
If the fuel filler lid is opened when the left sliding door is not closed completely, the door may be opened. Close the left sliding door before refueling to prevent possible dam-age to the door or the fuel filler lid.

• If the power sliding door is not closed and latched completely after power closing operation, the chime sounds 3 times. Open and close the door again.
  If the power sliding door is operated while the door is in partially opened position (less than 12 in./300 mm), the door is automatically opened fully.
  If the power sliding door is operated while the door is in half-opened position (more than 12 in./300 mm), the door is automatically closed completely.
  If the power sliding door is operated again while the door is closing, the door is automatically opened fully.
  If the power sliding door is operated again while the door is opening, the door is automatically closed completely. However, If the power sliding door is operated again when the door is in partially opened position (less than 12 in./300 mm), the door is opened continuously.
• The half-opened power sliding door is automatically opened or closed fully by pushing the door forward or backward without pulling the door handle while the power door ON/OFF button is in ON (not depressed). However, when the door is in partially opened position (less than 12 in./300 mm), the door is not closed automatically.

Power sliding door non-opening conditions
The power sliding door is not automatically opened, but closed under the following conditions. If the main or sub control button is pushed for power opening operation, the chime sounds once.
When the ignition switch is in the ON position,

1. Vehicle is moving above 3 mph (5 km/h).
2. The gearshift lever is not in P (Park) for automatic transmission.

Power liftgate operation (if equipped)

• Push the power liftgate main control button for approximately 1 second on the overhead console to open or close the power liftgate. However, the power liftgate will not open with the main control button when all power sliding doors and power liftgate are locked and closed. But the power liftgate will be opened with the folding key (or smart key).
• When the power liftgate is operated with the main or sub control but-ton or transmitter, the chime sounds and hazard warning lights flash 2 times.
• When the power door ON/OFF but-ton is ON (not depressed), do as follows to open or close the power liftgate:
  • Pushing the sub control button on the bottom of the liftgate will close the power liftgate automatically.
  • Pressing and pulling up the lift-gate handle slightly will open the power liftgate automatically when the liftgate is unlocked.
• When the power door ON/OFF but-ton is OFF (depressed), the power liftgate cannot be controlled with the sub control buttons or liftgate handle.
  However, the liftgate may be opened manually by pulling the exterior handle and lifting the lift-gate upward. The liftgate may be manually closed by pushing the lift-gate downward.
  Do not drive the vehicle until the power liftgate completely closed. The power liftgate may not close completely if the vehicle is started during automatic closing.

NOTICE
The button on the liftgate will not illuminated and operated when the power door ON/OFF button is OFF (depressed).

NOTICE
If the power liftgate does not operate normally, first check the following condition before using the power liftgate.

• Make sure the shift lever is in P (Park).
  Make sure the Power Liftgate Off switch is not pressed.

If any of the power liftgate buttons are pressed while the power liftgate is in operation, the power liftgate will stop. If any button is pressed again the power liftgate will reverse direction.

• Even though the Power door ON/OFF button is in the OFF (depressed) position, if the liftgate is manually closed to the secondary latch position, the liftgate will be electrically moved to the fully latched position. Make sure that face, arms, hands, and other obstructions are safely out of the way before operating the liftgate.
  The chime will sound and the hazard warning flasher will blink 10 times if you drive with the liftgate closed but not fully secured. Stop your vehicle immediately at a safe place to check if your liftgate is securely locked.
  If the power liftgate is not closed and latched completely after power closing operation, the chime will sound and hazard warning lights will blink 10 times. Stop the driving immediately and close the liftgate securely at the safe place.
• If the power liftgate is operated while the liftgate is in the partially opened position (more than 9degrees), the liftgate will stop the operation. If you operate the power liftgate again, the power liftgate will be operate in the opposite direction.
  If the power liftgate is operated while the liftgate is in the partially closed position (less than degrees), the liftgate will open fully.
  If the power liftgate is operated while the liftgate is in the partially opened position (less than 9degrees), the liftgate will stop at approximately 9degree open position.

WARNING

• Make sure there are no people or objects around the liftgate before operating the power liftgate. Wait until the liftgate is open fully and stopped before loading or unloading cargo or passengers from the vehicle.
  Make sure the liftgate is closed firmly before driving. If the liftgate is open, you will draw dangerous exhaust fumes into your vehicle which can cause serious injury or death to vehicle occupants.

Power liftgate non-opening conditions
The power liftgate will not open automatically, but will close under the following conditions.
When the ignition switch is in the ON position,

1. Vehicle is moving above 2 mph (3 km/h).
2. The gearshift lever is not in P (Park) for automatic transmission.

The chime will sound continuously if you drive over 2mph (3km/h) with the liftgate opened. Stop your vehicle at a safe place as soon as possible to check if your liftgate is opened.

Power liftgate opening height user setting

The driver may set the height of a fully opened liftgate by following the below instruction.

1. Confirm the position of the power door ON/OFF button is ON (not depressed).
2. Position the liftgate manually or via automatic operation to the height you prefer.
   WARNING
   Make sure that there are no people or objects in the path of the power liftgate (or smart liftgate) prior to use. Serious injury, damage to the vehicle or dam-age to surrounding objects may result if contact with the power liftgate (or smart liftgate) occurs.
3. Press the liftgate close button for more than 3 seconds.
4. You will hear the system beep twice indicating height has been set up.

The liftgate will open to the height the driver has set up.

Emergency liftgate safety release

Your vehicle is equipped with an emergency liftgate safety release lever located on the bottom of the lift-gate. When someone is inadvertently locked in the cargo area, the lift-gate can be opened by pushing the release lever and pushing open the liftgate.

Smart Liftgate (if equipped)

On a vehicle equipped with a smart key, the liftgate can be opened using the Smart liftgate system.
If the power door ON/OFF button is in the OFF (depressed) position, the smart liftgate will not operate.

How to use the Smart Liftgate
The liftgate can be opened with no touch activation if the conditions below are satisfied:

• The Smart Liftgate does not operate when:
  • The smart key is detected within 15 seconds after the doors are closed and locked, and is continuously detected.
  • The smart key is detected within 15 seconds after the doors are closed and locked, and within 60 inches (1.5 m) from the front door handles. (for vehicles equipped with Welcome Light)
  • A door is not locked or closed.
  • The smart key is in the vehicle.

1. Setting
   To activate the Smart Liftgate, go to User Settings Mode and select Smart Liftgate on the LCD display.
   For more information, refer to the “LCD Display” section in this chapter.
2. Detect and Alert
   If you are positioned in the detecting area (20 ~ 40 inches (50 ~ 100 cm) behind the vehicle) carrying a smart key, the hazard warning lights will blink and chime will sound for about 3 seconds to alert you the smart key has been detected and the liftgate will open.
   NOTICE
   Do not approach the detecting area if you do not want the liftgate to open. If you have unintentionally entered the detecting area and the hazard warning lights and chime starts to operate, leave the detecting area with the smart key. The liftgate will stay closed.
3.  Automatic opening
   The hazard warning lights will blink and chime will sound 2 times and then the liftgate will open.

Make sure you close the liftgate before driving your vehicle.
Make sure there are no people or objects around the liftgate before opening or closing the liftgate. Make sure objects in the liftgate do not come out when opening the liftgate on a slope. It may cause serious injury. Make sure to deactivate the Smart Liftgate when washing your vehicle. Otherwise, the liftgate may open inadvertently.

WARNING
The key should be kept out of reach of children. Children may inadvertently open the Smart Liftgate while playing around the rear area of the vehicle.

CAUTION
Liftgate lift
Make certain that you close the liftgate before driving your vehicle. Possible damage may occur to the liftgate lift cylinders and attached hardware if the liftgate is not closed prior to driving.

How to deactivate the Smart
Liftgate function using the smart key

1. Door lock
2. Door unlock
3. Liftgate open/close
4. Panic
5. Right side power sliding door open/close
6. Left side power sliding door open/close

If you press any button of the smart key during the Detect and Alert stage, the Smart Liftgate function will be deactivated.
Make sure to be aware of how to deactivate the Smart Liftgate function for emergency situations.

NOTICE

• If you press the door unlock but-ton (2), the Smart Liftgate function will be deactivated temporarily. But, if you do not open any door for 30 seconds, the smart lift-gate function will be activated again.
  If you press the liftgate open but-ton (3) for more than 1 second, the liftgate opens.
  If you press the door lock button
  (1) or liftgate open button (3) when the Smart Liftgate function is not in the Detect and Alert stage, the smart liftgate function will not be deactivated.
  In case you have deactivated the Smart Liftgate function by pressing the smart key button and opened a door, the smart liftgate function can be activated again by closing and locking all doors.

Detecting area

• The Smart Liftgate operates with a welcome alert if the smart key is detected within 20 ~ 40 inches (50 ~ 100 cm) from the liftgate.
  The alert stops at once if the smart key is positioned outside the detecting area during the Detect and Alert stage.

NOTICE

• The Smart Liftgate function will not work if any of the following occurs:
  • The smart key is close to a radio transmitter such as a radio station or an airport which can interfere with normal operation of the transmitter.
  • The smart key is near a mobile two way radio system or a cellular phone.
  • Another vehicle’s smart key is being operated close to your vehicle.
• The detecting range may decrease or increase when :
  • One side of the tire is raised to replace a tire or to inspect the vehicle.
  • The vehicle is parked on a slope or unpaved road, etc.

WINDOWS

1. Driver’s door power window switch
2. Front passenger’s door power window switch
3. Rear door (left) power window switch
4. Rear door (right) power window switch
5. Window opening and closing
6. Automatic power window
   up/down* (Driver’s and Passenger’s window)
7. Power window and rear sunroof* lock switch

* if equipped

NOTICE
In cold and wet climates, power windows may not work properly due to freezing conditions.

Power windows
The ignition switch must be in the ON position for power windows to operate.
Each door has a power window switch that controls the door’s window. The driver has a power window lock button which can block the operation of rear passenger windows. The power windows can be operated for approximately 30 seconds after the ignition key is removed or turned to the ACC or LOCK (or OFF) position. However, if the front doors are opened, the power windows cannot be operated even within the 30 second period.
If the window cannot be close because it is blocked by objects, remove the objects and close the window.

NOTICE
While driving with the rear windows down or with the sunroof (if equipped) in an open (or partially open) position, your vehicle may demonstrate a wind buffeting or pulsation noise. This noise is a nor-mal occurrence and can be reduced or eliminated by taking the following actions. If the noise occurs with one or both of the rear windows down, partially lower both front windows approximately one inch. If you experience the noise with the sunroof open, slightly reduce the size of the sunroof opening.

CAUTION
Do not install any accessories in the area of windows. It may impact jam protection.

Window opening and closing

The driver’s door has a master power window switch that controls all the windows in the vehicle.
To open or close a window, press down or pull up the front portion of the corresponding switch to the first detent position (5).

Auto up/down window (if equipped)

Pressing or pulling up the power window switch momentarily to the second detent position (6) completely lowers or raises the window even when the switch is released. To stop the window at the desired position while the window is in operation, pull up or press down and release the switch.
If the power window does not operate normally, the automatic power window system must be reset as follows:

1. Turn the ignition switch to the ON position.
2. Close the driver’s and passenger’s window and continue pulling up the driver’s power window switch for at least 1 second after the window is completely closed.

Automatic reversal
(for Auto up/down window)
If the upward movement of the window is blocked by an object or part of the body, the window will detect the resistance and will stop upward movement. The window will then lower approximately 11.8 in. (30 cm) to allow the object to be cleared.
The distance may vary based on the size or position of the window. If the window detects the resistance while the power window switch is pulled up continuously, the window will stop upward movement then lower approximately 1 in. (2.5 cm).

And if the power window switch is pulled up continuously again within 5 seconds after the window is lowered by the automatic window reversal feature, the automatic window reversal will not operate.
The automatic reverse feature for the driver’s window is only active when the “auto up” feature is used by fully pulling up the switch. The automatic reverse feature will not operate if the window is raised using the halfway position on the power window switch.

WARNING
Do not install any accessories in the vehicle that extend into the open window area. Such objects could prevent the automatic reverse feature from functioning.

WARNING
Always check for obstructions before raising any window to avoid injuries or vehicle dam-age. If an object less than 0.16 in.(4 mm) in diameter is caught between the window glass and the upper window channel, the automatic reverse window may not detect the resistance and will not stop and reverse direction.

WARNING
The automatic reverse feature doesn’t activate while resetting power window system. Make sure body parts or other objects are safely out of the way before closing the windows to avoid injuries or vehicle damage.

Power window and rear sunroof* lock button

• The driver can disable the power window switches on a rear passenger door and the rear sunroof switch on a rear passenger room lamp by depressing the power window and rear sunroof lock switch on the driver’s door to LOCK (pressed).

* : if equipped

• When the power window and rear sunroof lock switch is pressed:
  • The driver’s master control can operate all the power windows.
  • The front passenger’s control can operate the front passenger’s power window.
• The rear passenger’s control can-not operate the rear passenger’s power window.
  The rear sunroof control cannot operate the rear sunroof. But the front master sunroof control can operate both front and rear sun-roofs (if equipped).

CAUTION
Opening/closing Window
To prevent possible damage to the power window system, do not open or close two windows or more at the same time. This will also ensure the longevity of the fuse.

Always double check to make sure all arms, hands, head and other obstructions are safely out of the way before closing a window.

WARNING
Power window

• Do not allow children to play with the power windows. Keep the power window lock button (on the driver’s door) in the LOCK (pressed) position.
  Do not extend any face or arms outside through the window opening while driving.

HOOD

Opening the hood

1. Pull the release lever to unlatch the hood. The hood should pop open slightly.
   Open the hood after turning off the engine on a flat surface, shifting the shift lever to the P (Park) position and setting the parking brake.
   
2. Go to the front of the vehicle, raise the hood slightly, pull up the secondary latch (1) inside of the hood center and lift the hood (2).
   
3. Pull out the support rod.
4. Hold the hood opened with the support rod.

WARNING
Stay Rod

• To prevent from being burned by hot metal, grab the stay rod in the area wrapped in rubber.
  Ensure the stay rod is completely inserted into the hole provided whenever you inspect the engine compartment. This will prevent the hood from falling and possibly injuring you.

Hood open warning

The warning message will appear on the LCD display when hood is open.
The warning chime will operate when the vehicle is being driven at or above 2 mph (3 km/h) with the hood open.

Closing the hood

1. Before closing the hood, check the following:
   • All filler caps in the engine compartment must be correctly installed.
   • Gloves, rags or any other combustible material must be removed from the engine compartment.
2. Return the support rod to its clip to prevent it from rattling.
   Lower the hood until it is about 1 ft.(30 cm) above the closed position and let it drop. Make sure that it locks into place.
3. Check that the hood has engaged properly. If the hood can be raised slightly, it is not properly engaged Open it again and close it with a little more force.

CAUTION
Hood obstruction
Before closing the hood, ensure that all obstructions are
removed from the hood opening. Closing the hood with an obstruction present in the hood opening may result in property damage.

WARNING
Fire risk
Do not leave gloves, rags or any other combustible material in the engine compartment. Doing so may cause a heat-induced fire.

WARNING
Unsecured engine hood
Always double check to be sure that the hood is firmly latched before driving away. If it is not latched, the hood could fly open while the vehicle is being driven, causing a total loss of visibility, which might result in an accident.

FUEL FILLER LID

Opening the fuel filler lid

The fuel filler lid must be opened from inside the vehicle by pulling up the fuel filler lid opener.
If the fuel filler lid does not open because ice has formed around it, tap lightly or push on the lid to break the ice and release the lid. Do not pry on the lid. If necessary, spray around the lid with an approved deicer fluid (do not use radiator anti-freeze) or move the vehicle to a warm place and allow the ice to melt.

1. Stop the engine.
2. To open the fuel filler lid, push the fuel filler lid opener button.
3. Pull open the fuel filler lid (1).
4. To remove the cap, turn the fuel filler cap (2) counterclockwise.
5. Refuel as needed.

Closing the fuel filler lid

1. To install the cap, turn it clockwise until it “clicks” once. This indicates that the cap is securely tightened.
2. Close the fuel filler lid and push it in lightly making sure that it is securely closed.

NOTICE
There may be an intermittent noise near the refueling hole while the engine is idling if the fuel cap is not closed securely. This occurs normally with the OBD (On-Board Diagnostics) system.

NOTICE
When refueling on unlevel ground, the fuel gauge may not point to the F position.
If you move your vehicle to a level ground, the fuel gauge will move to the full position.

WARNING
Refueling
Always remove the fuel cap carefully and slowly. If the cap is venting fuel or if you hear a hissing sound, wait until the condition stops before completely removing the cap. If pressurized fuel sprays out, it can cover your clothes or skin and subject you to the risk of fire and burns.

Always check that the fuel cap is installed securely to prevent fuel spillage in the event of an accident.

NOTICE
Tighten the cap until it clicks once, otherwise the fuel cap open warning indicator light will illuminate

WARNING
Fire/explosion risk
Read and follow all warnings posted at the gas station facility. Failure to follow all warnings will result in severe personal injury, severe burns or death due to fire or explosion.

WARNING
Static electricity

• Before touching the fuel nozzle, you should eliminate potentially dangerous static electricity discharge by touching another metal part of the vehicle, a safe distance away from the fuel filler neck, nozzle, or other gas source.
  Do not get back into a vehicle once you have begun refueling since you can generate static electricity by touching, rubbing or sliding against any item or fabric (polyester, satin, nylon, etc.) capable of producing static electricity. Static electricity discharge can ignite fuel vapors resulting in rapid burning. If you must reenter the vehicle, you should once again eliminate potentially dangerous static electricity discharge by touching a metal part of the vehicle, away from the fuel filler neck, nozzle or other gasoline source.

WARNING
Portable fuel container
When using an approved portable fuel container, be sure to place the container on the ground prior to refueling. Static electricity discharge from the container can ignite fuel vapors causing a fire. Once refueling has begun, contact with the vehicle should be maintained until the filling is complete. Use only approved portable plastic fuel containers designed to carry and store gasoline.

WARNING
Cell phone fires
Do not use cellular phones while refueling. Electric current and/or electronic interference from cellular phones can poten-tially ignite fuel vapors causing a fire.

WARNING
Smoking
DO NOT use matches or a lighter and DO NOT SMOKE or leave a lit cigarette in your vehicle while at a gas station especially during refueling. Automotive fuel is highly flammable and can, when ignited, result in fire.

WARNING
Refueling & Vehicle fires
When refueling, always shut the engine off. Sparks produced by electrical components related to the engine can ignite fuel vapors causing a fire. Once refueling is complete, check to make sure the filler cap and filler door are securely closed, before starting the engine.

Make sure to refuel your vehicle according to the “Fuel requirements” suggested in chapter 1.
If the fuel filler cap requires replacement, use only a genuine Kia cap or the equivalent specified for your vehicle. An incorrect fuel filler cap can result in a serious malfunction of the fuel system or emission control system.

CAUTION
Exterior paint
Do not spill fuel on the exterior surfaces of the vehicle. Any type of fuel spilled on painted surfaces may damage the paint.

Emergency fuel filler lid release

If the fuel filler lid does not open using the remote fuel filler lid release, you can open it manually by pulling the handle outward slightly.

CAUTION
Do not pull the handle excessively, otherwise the luggage area trim or release handle may be damaged.

FAQs

Useful Links

View Full User Guide: Kia Sedona User Manual | Auto User Guide
Download Manuals: Owner’s Manuals and Documents | Kia