Kia Soul 2022 Rear Cross-Traffic Collision User Manual

Introduction

The automobile sector has seen a considerable transformation due to the quick development of technology, which has also changed how we drive and improved vehicle safety. The Rear Cross-Traffic Collision system is one such cutting-edge safety technology that tries to stop accidents while backing up by warning drivers of approaching vehicles or pedestrians. This cutting-edge technology is included in the Kia Soul 2023, a well-liked compact car noted for its distinctive style and functionality, to give drivers an extra measure of security. This essay will examine the Kia Soul 2023’s Rear Cross-Traffic Collision system in detail, examining its features, advantages, and effects on overall traffic safety.

The technology immediately informs the driver via a combination of audio and visual cues when it detects an oncoming vehicle or pedestrian. To alert the driver to a potential hazard, this often comprises warning sounds and visual signs on the dashboard or rearview mirror of the vehicle. Rear Cross-Traffic Collision system’s early alerts allow drivers the time to respond and perform appropriate evasive actions, lowering the chance of crashes and enhancing overall road safety. The technique for preventing rear cross-traffic collisions has many advantages. First of all, it greatly improves the driver’s situational awareness, especially in circumstances when blind spots could obstruct their view. The device serves as an extra set of eyes, keeping watch over places that are frequently difficult to observe, such as congested parking lots or perpendicular parking spaces. This function makes reversing maneuvers safer and more effective by preventing accidents brought on by unanticipated oncoming traffic or pedestrians.

Rear Cross-Traffic Collision

Rear Cross-Traffic Collision Warning
Rear Cross-Traffic Collision Warning uses radar sensors to monitor the approaching cross traffic from the left and right side of the vehicle when your vehicle is in reverse.

The blind spot detection range varies relative to the approaching vehicle speed.

Rear Cross-Traffic Collision-Avoidance Assist
Rear Cross-Traffic Collision-Avoidance Assist monitors approaching cross traffic from the left and right side of the vehicle when your vehicle is approaching.
Rear Cross-Traffic Collision-Avoidance Assist may activate Electronic Stability Control in certain situations.

WARNING

1. Always be aware of road and traffic conditions while driving and be alert for unexpected situations even though Rear Cross-Traffic Collision Warning and Rear Cross-Traffic Collision-Avoidance Assist are operating.
2. Rear Cross-Traffic Collision Warning and Rear Cross-Traffic Collision-Avoidance Assist are supplemental functions to assist you. Do not entirely rely on the functions. Always pay attention, while driving, for your safety.
3. Rear Cross-Traffic Collision Warning and Rear Cross-Traffic Collision-Avoidance Assist are not substitutes for proper and safe driving. Always drive safely and use caution when backing up the vehicle.

Setting and activating Rear Cross-Traffic Collision Warning/Rear Cross-Traffic Collision-Avoidance Assist
The driver can activate the functions by placing the ignition switch or ENGINE START/STOP button to the ON position and by selecting:

1. Go to the ‘User Settings in the cluster → Driver Assistance → Blind-Spot Safety → Rear Cross-Traffic Safety’.

Rear Cross-Traffic Collision-Avoidance Assist and Rear Cross-Traffic Collision Warning is ready to be activated when ‘Rear Cross-Traffic Safety’ is selected. When the vehicle is turned off then on again, the functions will be ready to be activated. When the function is initially turned on and when the engine is turned off and then on again, the warning light will illuminate for 3 seconds on the outer side view mirror.

Setting the initial warning activation time
The driver can select the initial warning activation time in the User Settings in the LCD display by selecting:

1. ‘User Settings in the cluster → Driver Assistance → Warning Timing’.

The options for the initial Rear Cross-Traffic Collision Warning include the following:

1. Normal: When this option is selected, the initial Rear Cross-Traffic Collision Warning is activated normally. If this setting feels sensitive, change the option to ‘Late’.
2. Late: Select this warning activation time when the traffic is light and you are driving in a low speed.

NOTICE
If you change the warning timing, the warning time of other systems may change. Always be aware before changing the warning timing.

Setting the warning volume of Rear Cross-Traffic Collision Warning
The driver can select the warning volume of the Rear Cross-Traffic Collision Warning by selecting:

1. Go to the ‘User Settings → Driver Assistance → Warning Volume → High/Medium/Low’.

NOTICE
If you change the warning volume, the warning volume of other systems may change. Always be aware before changing the warning volume.
For more details, refer to “LCD display” on pages 4-53.

Operating conditions
The system will activate when the vehicle speed is below 7 mph (10 km/h) and with the shift lever in R (Reverse).
The function will not activate when the vehicle speed exceeds 7 mph (10 km/h). The function will activate again when the speed is below 5 mph (8 km/h). The function detecting range is approximately 1~82 ft (0.5~25 m). An approaching vehicle will be detected if the vehicle speed is within 5~26.5 mph (8~43 km/h). Note that the detecting range may vary under certain conditions. As always, use caution and pay close attention to your surroundings when backing up your vehicle.

Rear Cross-Traffic Collision Warn-ing alert
If the vehicle detected by the sensors approaches from the rear left/right side of your vehicle, the warning chime will sound, the warning light on the outer side view mirror will blink and a message will appear on the LCD display.

Left

Right

If the rearview camera is in activation, a message will also appear on the instrument cluster or multimedia screen.

The warning will stop when:

1. the detected vehicle moves out of the sensing area or
2. when the vehicle is right behind your vehicle or
3. when the vehicle is not approaching your vehicle or
4. when the other vehicle slows down.

Rear Cross-Traffic Collision-Avoidance Assist alert
If the risk of collision is detected while Rear Cross-Traffic Collision Warning is generated, brake control may be activated. The instrument cluster will inform the driver of the brake control. If the rear view cam-era is in activation, a message will also appear on the instrument cluster or multimedia screen.

Left

Right

After brake control is activated, the driver must immediately depress the brake pedal and check the surroundings.

1. The brake activation by the function lasts for about 2 seconds. The driver must pay attention as the brake is disengaged after 2 seconds.
2. The brake control by the function is canceled if the driver depresses the brake pedal with sufficient power.
3. Brake control is activated once for each right/left approach after shifting the shift lever to R (Reverse).

The brake control may not operate properly according to the status of the ESC (Electronic Stability Control).

The same warning message is displayed on the instrument cluster when:

1. The ESC warning light is on.
2. ESC is engaged in a different function.

CAUTION

1. When the operation condition of the Rear Cross-Traffic Collision Warning function is met, the warning will occur every time a vehicle approaches the side or rear of your stopped (0 mph (0 km/h) vehicle speed) vehicle.
2. The functions warning or brake may not operate properly if the left or right of your vehicle’s rear bumper is blocked by a vehicle or obstacle.
3. The driver should always use extreme caution while operating the vehicle, whether or not the warning light on the outer side view mirror illuminates or there is a warning alarm.
4. Playing the vehicle audio system at high volume may prevent occupants from hearing the function’s warning sounds.
5. If any other warning sound, such as seat belt warning chime, is already generated, Rear Cross-Traffic Collision Warning warning may not sound.

WARNING

1. Drive safely even though the vehicle is equipped with Rear Cross-Traffic Collision Warning and Rear Cross-Traffic Collision-Avoidance Assist. Do not solely rely on the function but check your surrounding when backing the vehicle up.
2. The driver is responsible for accurate brake control.
3. Always pay extreme caution while driving. Rear Cross-Traffic Collision Warning and Rear Cross-Traffic Collision-Avoidance Assist may not operate properly or unnecessarily operate depending on traffic and driving conditions.
4. Rear Cross-Traffic Collision-Avoidance Assist is not a substitute for safe driving practices, but a convenience function only. It is the responsibility of the driver to always drive cautiously to prevent unexpected and sudden situations from occurring. Pay attention to the road conditions at all times.

Detecting Sensor (Rear Corner Radar Sensor)
The rear corner radars are located inside the rear bumper for detecting the side and rear areas. Always keep the rear bumper clean for proper operation of the function.

CAUTION

1. The function may not work properly when the bumper has been damaged, or if the rear bumper has been replaced or repaired.
2. The function may turn off if interfered by electromagnetic waves.
3. Always keep the sensors clean.
4. NEVER arbitrarily disassemble the sensor component or apply any impact on the sensor component.
5. Be careful not to apply unnecessary force on the radar sensor or sensor cover. If the sensor is forcibly moved out of proper alignment, the function may not operate correctly. In this case, a warning message may not be dis-played. Have the vehicle inspected by an authorized Kia dealer.
6. Do not apply foreign objects, such as a bumper sticker or a bumper guard, near the radar sensor or apply paint to the sensor area. Doing so may adversely affect the performance of the sensor.

Warning message
If a warning message related to Rear Cross-Traffic Collision Warning/Rear Cross-Traffic Collision-Avoidance Assist appears, take appropriate measures as detailed below.

Blind-Spot Collision Warning (BCW) system was disabled.

Radar Blocked

This warning message may appear when:

1. One or both of the sensors on the rear bumper is covered by dirt or snow or a foreign object.
2. Driving in rural areas where the sensor does not detect another vehicle for an extended period of time.
3. When there is inclement weather such as heavy snow or rain.

If any of these conditions occur, the light on the Blind-Spot Safety button and the function will turn off automatically. When Blind-Spot Collision Warning canceled warning message is displayed in the cluster, check to make sure that the rear bumper is free from any dirt or snow in the areas where the sensor is located. Remove any dirt, snow, or foreign material that could inter-fere with the radar sensors. After any dirt or debris is removed, the function should operate normally after about 10 minutes of driving the vehicle.
If the function still does not operate normally have your vehicle inspected by an authorized Kia dealer.

NOTICE
Turn off Blind-Spot Collision Warning and Rear Cross-Traffic Collision Warning when a trailer or carrier is installed.

1. Press the Blind-Spot Safety button (the indicator on the switch will turn off)
2. Deactivate Rear Cross-Traffic Collision Warning by deselecting ‘User Settings → Driver Assistance → Blind-Spot Safety → Rear Cross-Traffic Collision Warning

Check Blind-Spot Collision Warning (BCW) System

Type A

Type B

If there is a problem with Blind-Spot Collision Warning, a warning message will appear and the light on the switch will turn off. The function will turn off automatically. Rear Cross-Traffic Collision Warning and Rear Cross-Traffic Collision-Avoidance Assist will not operate also if Blind-Spot Collision Warning turns off due to malfunction. Have your vehicle inspected by an authorized Kia dealer.

Limitations of the Function
The driver must be cautious in the below situations, because the function may not detect other vehicles or objects in certain circumstances.

1. When a trailer or carrier is installed.
2. The vehicle drives in inclement weather such as heavy rain or snow.
3. The sensor is covered with rain, snow, mud, etc.
4. The rear bumper where the sensor is located is covered with a foreign object such as a bumper sticker, a bumper guard, a bike rack, etc.
5. The rear bumper is damaged, or the sensor is out of the original default position.
6. The vehicle height gets lower or higher due to heavy loading in a trunk, abnormal tire pressure, etc.
7. When the temperature of the rear bumper is high.
8. When the sensors are blocked by other vehicles, walls or parking-lot pillars.
9. The vehicle drives on a curved road.
10. The road pavement (or the peripheral ground) abnormally contains metallic components (i.e. possibly due to subway construction).
11. There is a fixed object near the vehicle, such as a guardrail.
12. While going down or up a steep road where the height of the lane is different.
13. Driving on a narrow road where trees or grass or overgrown.
14. Driving in rural areas where the sensor does not detect another vehicle for an extended period of time.
15. Driving on a wet road.
16. Driving on a road where the guardrail or wall is in a double structure.
17. A big vehicle is near such as a bus or truck.
18. When the other vehicle approaches very close.
19. When the other vehicle passes at a very fast speed.
20. While changing lanes.
21. If the vehicle has started at the same time as the vehicle next to you and has accelerated.
22. When the vehicle in the next lane moves two lanes away from you OR when the vehicle two lanes away moves to the next lane from you.
23. A motorcycle or bicycle is near.
24. A flat trailer is near.
25. If there are small objects in the detecting area such as a shopping cart or a baby stroller.
26. If there is a low-height vehicle such as a sports car.
27. The brake pedal is depressed.
28. ESC (Electronic Stability Control) is activated.
29. ESC (Electronic Stability Control) malfunctions.
30. The tire pressure is low or the tire is damaged.
31. The brake is reworked.
32. The vehicle sharply stops.
33. Temperature is extremely low around the vehicle.
34. The vehicle severely vibrates while driving over an uneven/ bumpy road, or concrete patch.
35. The vehicle drives on a slippery surface due to snow, water puddle, or ice.

Driving Where There is a Vehicle or Structure Near

[A]: Structure
The function may not operate properly when driving where there is a vehicle or structure near. In certain instances, the function may not detect the vehicle approaching from behind and the warning or brake may not operate properly. Always pay attention to your surroundings while backing up.

When the Vehicle is in a Complex Parking Environment

The function may not operate properly when the vehicle is in a complex parking environment.
In certain instances, the function may not be able to exactly determine the risk of collision for the vehicles which are parking or pulling out near your vehicle (e.g. a vehicle escaping beside your vehicle, a vehicle parking or pulling out in the rear area, a vehicle approaching your vehicle making a turn, etc.). If this occurs, the warning or brake may not operate properly.

When the Vehicle is Parked Diagonally

[A]: Vehicle
The function may not operate properly when the vehicle is parked diagonally.
In certain instances, when the diagonally parked vehicle is pulled out of the parking space, the function may not detect the vehicle approaching from the rear left/right of your vehicle. In this case, the warning or brake may not operate properly. Always pay attention to your surroundings while backing up.

When the Vehicle is on/Near a Slope

The function may not operate properly when the vehicle is on/near a slope. In certain instances, the function may not detect the vehicle approaching from the rear left/right and the warning or brake may not operate properly. Always pay attention to your surroundings while backing up.

Pulling into the Parking Space where there is a Structure

The function may not operate properly when pulling the vehicle to the parking space where there is a structure at the back or side of your vehicle.
In certain instances, when backing into the parking space, the function may not detect the vehicle moving in front of your vehicle. In this case, the warning or brake may not operate properly.
Always pay attention to your surroundings while backing up.

When the vehicle is parked rear-ward

If the vehicle is parked rearward and the sensor detects the other vehicle in the rear area of the parking space, the function can warn or control braking.
Always pay attention to your surroundings while backing up.

This device complies with Part 15 of the FCC rules.
Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

FAQs

1. What is Rear Cross-Traffic Collision?
   A rear cross-traffic collision is a specific kind of accident that happens when a car is backing up and strikes something or someone coming from the side, usually without the driver seeing it.
2. Does the Kia Soul 2023 have Rear Cross-Traffic Collision prevention features?
   The Kia Soul 2023 does, in fact, come with cutting-edge safety systems, such as Rear Cross-Traffic Collision-Avoidance Assist (RCCA), which helps drivers avoid collisions by alerting them when vehicles are coming from the rear.
3. How does Rear Cross-Traffic Collision-Avoidance Assist work in the Kia Soul 2023?
   The Kia Soul 2023 keeps an eye on the space behind the car using sensors like radars or cameras. The technology warns the driver visually and audibly if an oncoming vehicle is spotted as the automobile is backing up, allowing them to make the appropriate evasive moves.
4. Can the Rear Cross-Traffic Collision-Avoidance Assist system apply brakes automatically?
   The Rear Cross-Traffic Collision Avoidance Assist system can apply the brakes automatically to lessen or prevent a potential collision if the Kia Soul 2023 is equipped with the available automatic emergency braking technology.
5. Can Rear Cross-Traffic Collision Avoidance Assist to detect pedestrians or other objects?
   The detection of incoming cars is the main duty of Rear Cross-Traffic Collision-Avoidance Assist. However, certain cutting-edge systems might also be able to recognise pedestrians or other objects, and if necessary, issue alerts or initiate autonomous braking.
6. Is Rear Cross-Traffic Collision-Avoidance Assist always active in the Kia Soul 2023?
   The driver can normally enable or disable the rear cross-traffic collision avoidance assist feature. For increased safety when driving, it is advised to keep the system turned on.
7. Can the Rear Cross-Traffic Collision-Avoidance Assist system prevent all collisions?
   Although Rear Cross-Traffic Collision-Avoidance Assist is meant to assist drivers in avoiding crashes, it cannot ensure that all mishaps will be avoided. It’s crucial for drivers to pay attention, use their mirrors, and be careful when backing up.
8. Are there any limitations to the Rear Cross-Traffic Collision-Avoidance Assist system?
   A number of variables, including the state of the weather, sensor obstructions, and the speed of the oncoming vehicle, can affect how well the system works. In some circumstances, the system might not be able to detect all objects or vehicles.
9. Can Rear Cross-Traffic Collision-Avoidance Assist be retrofitted to older Kia Soul models?
   It might be difficult and possibly impossible to retrofit more modern safety technologies, including Rear Cross-Traffic Collision Avoidance Assist, into older cars. For specific retrofitting possibilities, it is advised to speak with a licenced Kia dealership or service facility.
10. Can the Rear Cross-Traffic Collision Avoidance Assist system be turned off?
    Yes, the Rear Cross-Traffic Collision Avoidance Assist system may typically be disabled or turned off using the settings or controls on the car. To ensure optimal safety, it is advised to keep the system turned on.
11. Can the Rear Cross-Traffic Collision Avoidance Assist system be customized or adjusted?
    Depending on the vehicle’s trim level and model, several customization choices may be available. Although some systems may let you change the alerts’ sensitivity or level, it’s best to consult your car’s owner’s manual for detailed instructions.
12. Does Rear Cross-Traffic Collision Avoidance Assist replace the need for using rearview mirrors and looking over your shoulder?
    Rear Cross-Traffic Collision Avoidance Assist is a separate safety function that aids the driver. It shouldn’t take the role of manually monitoring blind spots and using rearview mirrors when reversing.
13. Can the Rear Cross-Traffic Collision Avoidance Assist system be deactivated temporarily?
    In specific circumstances, such as when pulling a trailer, the device may automatically disengage. However, for more information regarding temporary deactivation, it is advised to reference the owner’s manual or get in touch with a Kia store.
14. Is Rear Cross-Traffic Collision Avoidance Assist available on all Kia Soul 2023 trim levels?
    Depending on the particular trim level and optional packages selected, the Rear Cross-Traffic Collision Avoidance Assist system may not be available at all times. It is advised to contact Kia or the dealership to confirm the actual features offered on a given trim level.
15. Is Rear Cross-Traffic Collision Avoidance Assist covered under Kia’s warranty?
    Depending on the country and particular terms and conditions, warranty coverage may vary. To find out if Rear Cross-Traffic Collision Avoidance Assist is covered by warranty, it is advisable to look over the warranty paperwork or speak with Kia or the dealership.

Useful Links

View Full User Guide: Kia Soul 2022 Owner’s Manual | Auto User Guide
Download Manuals: Owner’s Manuals and Documents | Kia