Kia Soul 2023 Tire Change User Manual
Introduction
- Safety First: Make sure you are parked on a level surface away from traffic before attempting to change a tire. To warn other motorists, apply the parking brake and turn on the hazard lights.
- Compile Spare Tire and Tools: The Kia Soul 2023 is equipped with a spare tire, a jack, a lug wrench, and perhaps other tools needed for a tire change. Make sure these tools are in good condition and locate them in the trunk or underneath the cargo area.
- Loosen Lug Nuts: Carefully loosen the lug nuts on the flat tire using the lug wrench. At this time, loosen them but do not completely remove them.
- Set the Jack in Place: Look for the Kia Soul 2023’s designated jack points, which are typically noted in the owner’s guide. Assuring stability and security, place the jack under the frame close to the flat tire.
- Raise the Vehicle: Start by turning the jack to raise the vehicle. Raise it so that the flat tire is off the ground but still in contact with the ground by raising it high enough.
- Remove Loosened Lug Nuts and Flat Tire: After lifting the car, completely remove the loosened lug nuts. Remove the flat tire with care from the car and place it somewhere else.
- Tighten Lug Nuts: Begin manually screwing the lug nuts onto the wheel bolts. To ensure even tightening, tighten them as much as you can in a crisscross or star pattern using the lug wrench.
- Lower the Vehicle: Gradually release the jack and carefully lower the car. Remove the jack completely once the car is back on the ground.
- Tighten Lug Nuts Once More: Apply additional torque to the lug nuts in a crisscross or star pattern using the lug wrench. Make sure they are firmly tightened, but take care not to overtighten.
- Check Tire Pressure: After changing the tire, use a tire pressure gauge to check the pressure in the spare tire. If necessary, inflate it to the suggested pressure.
- Put the Flat Tire and Tools Back in the Car: Put the flat tire, jack, lug wrench, and any other tools back in the car’s designated storage areas.
- Get the Flat Tire Fixed: Keep in mind that the spare tire is only meant to be used temporarily. A professional tire service must fix or replace the flat tire as soon as humanly possible.
Changing Tires
Never attempt vehicle repairs in the traffic lanes of a public road or highway.
- Always move the vehicle completely off the road and onto the shoulder before trying to change a tire. The jack should be used on a firm level ground. If you cannot find a firm, level place off the road, call a towing service company for assistance.
- Be sure to use the correct front and rear jacking positions on the vehicle; never use the bumpers or any other part of the vehicle for jack support.
- Do not allow anyone to remain in the vehicle while it is on the jack.
Make sure any children present are in a secure place away from the road and from the vehicle to be raised with the jack.
WARNING
Running vehicle on jack
Do not start or run the engine of the vehicle while the vehicle is on the jack as this may cause the vehicle to fall off the jack.
To prevent the jack from “rattling” while the vehicle is in motion, store it properly.
Removing and storing the spare tire
- Turn the tire hold-down wing bolt counterclockwise to remove.
Store the tire in the reverse order of removal.
To prevent the spare tire and tools from “rattling” while the vehicle is in motion, store them properly.
WARNING
Touching surface of the luggage room floor
Do not touch the metal surface of the luggage room floor while the engine is operating or hot. Doing so could result in serious bodily injury.
Turn the engine off and wait until it cools down or wear gloves to remove the spare tire from the luggage room.
Changing Tires
- Park on a level surface and apply the parking brake firmly.
- Place the transmission shift lever in P (Park).
- Activate the hazard warning flashers.
- Remove the wheel lug nut wrench, jack and spare tire from the vehicle.
- Block both the front and rear of the wheel that is diagonally opposite from the jack position.
WARNING
Jack location
To reduce the possibility of injury, be sure to use only the jack provided with the vehicle in the correct jack position; never use any other part of the vehicle for jack support.
WARNING
Changing a tire- To prevent vehicle movement while changing a tire, always set the parking brake fully, and always block the wheel diagonally opposite the wheel being changed.
- We recommend that the wheels of the vehicle be blocked, and that no person remain in a vehicle that is being jacked.
- Loosen the wheel lug nuts counterclockwise one turn each, but do not remove any nut until the tire has been raised off the ground.
- Place the jack at the front (1) or rear
(2) jacking position closest to the tire you are changing. Place the jack at the designated locations under the frame. The jacking positions are plates welded to the frame with two tabs and a raised dot to line up with the jack.
- Insert the wheel lug nut wrench into the jack and turn it clockwise, raising the vehicle until the tire just clears the ground. This measurement is approximately 1 in (30 mm).
Before removing the wheel lug nuts, make sure the vehicle is stable and that there is no chance for movement or slippage. - Loosen the wheel nuts and remove them with your fingers.
- Slide the wheel off the studs and lay it flat so it cannot roll away.
- To put the wheel on the hub, pick up the spare tire, line up the holes with the studs and slide the wheel onto them. If this is difficult, tip the wheel slightly and get the top hole in the wheel lined up with the top stud.
- Jiggle the wheel back and forth until the wheel can slide over the other studs.
Wheels may have sharp edges. Handle them carefully to avoid possible severe injury. Before putting the wheel into place, be sure that there is nothing on the hub or wheel (such as mud, tar, gravel, etc.) that prevents the wheel from fitting solidly against the hub.
WARNING
Installing a wheel
Make sure the wheel makes good con-tact with the hub when installed. If the contact of the mounting surface between the wheel and hub is not good, the wheel nuts could come loose and cause the loss of a wheel. Loss of a wheel may result in loss of control of the vehicle. - To install the wheel, hold it on the studs, put the wheel nuts on the studs and tighten them finger tight.
- Jiggle the tire to be sure it is completely seated, then tighten the nuts as much as possible with your fingers again.
- Insert the wrench into the jack and lower the vehicle to the ground by turning the wheel nut wrench counterclockwise.
- Position the wrench as shown in the drawing and tighten the wheel nuts. Be sure the socket is seated completely over the nut. Do not stand on the wrench handle or use an extension pipe over the wrench handle.
- Go around the wheel, tightening every nut following the numerical sequence shown in the image until they are all tight. Double-check each nut for tightness.
- After changing wheels, have an authorized Kia dealer tighten the wheel nuts to their proper torque as soon as possible.
- To prevent the jack, wheel lug nut wrench and spare tire from rattling while the vehicle is in motion, store them properly.
- Check the inflation pressures as soon as possible after installing the spare tire. Adjust it to the specified pressure, if necessary. Refer to “Tires and wheels” on page 8-5.
Wheel nut tightening torque:
79~94 lbf·ft (11~13 kgf·m)
If you have a tire gauge, remove the valve cap and check the air pressure. If the pressure is lower than recommended, drive slowly to the nearest service station and inflate to the correct pressure. If it is too high, adjust it until it is correct. Always reinstall the valve cap after checking or adjusting the tire pressure. If the cap is not replaced, dust and dirt may get into the tire valve and air may leak from the tire. If you lose a valve cap, buy another and install it as soon as possible.
After you have changed the wheels, always secure the flat tire in its place and return the jack and tools to their proper storage locations.
CAUTION
Reusing lug nuts
Make certain during wheel removal that the same nuts that were removed are reinstalled – or, if replaced, that nuts with metric threads and the same chamfer configuration are used. Your vehicle has metric threads on the wheel studs and nuts. Installation of a non-metric thread nut on a metric stud will not secure the wheel to the hub properly and will dam-age the stud so that it must be replaced.
Note that most lug nuts do not have metric threads. Be sure to use extreme care in checking for thread style before installing aftermarket lug nuts or wheels. If in doubt, consult an authorized Kia dealer.
WARNING
Wheel studs
If the studs are damaged, they may lose their ability to retain the wheel. This could lead to the loss of the wheel and a collision resulting in serious injuries.
Important – Use of Compact Spare Tire
Your vehicle is equipped with a compact spare tire. This compact spare tire takes up less space than a regular-size tire. This tire is smaller than a conventional tire and is designed for temporary use only.
- You should drive carefully when the compact spare is in use. The compact spare should be replaced by the proper conventional tire and rim at the first opportunity.
The operation of this vehicle is not recommended with more than one compact spare tire in use at the same time.
WARNING
Spare Tire
The compact spare tire is for emergency use only. Do not operate your vehicle on this compact spare at speeds over 50 mph (80 km/h). The original tire should be repaired or replaced as soon as possible to avoid failure of the spare possibly leading to bodily injury or death.
The compact spare should be inflated to 60 psi (420 kPa).
NOTICE
Check the inflation pressure after installing the spare tire. Adjust it to the specified pressure, as necessary.
When using a compact spare tire, observe the following precautions:
- Under no circumstances should you exceed 50 mph (80 km/h); a higher speed could damage the tire.
Ensure that you drive slowly enough for the road conditions to avoid all hazards. Any road hazard, such as a pothole or debris, could seriously damage the compact spare. - Any continuous road use of this tire could result in tire failure, loss of vehicle control, and possible personal injury.
- Do not exceed the vehicle’s maximum load rating or the load-carrying capacity shown on the sidewall of the compact spare tire.
- Avoid driving over obstacles. The compact spare tire diameter is smaller than the diameter of a conventional tire and reduces the ground clearance approximately 1 inch (25 mm), which could result in damage to the vehicle.
- Do not take this vehicle through an automatic vehicle wash while the compact spare tire is installed.
Do not use tire chains on the compact spare tire. Because of the smaller size, a tire chain will not fit properly. This could damage the vehicle and result in loss of the chain. - Do not use the compact spare tire on any other vehicle because this tire has been designed especially for your vehicle.
- The compact spare tire’s tread life is shorter than a regular tire. Inspect your compact spare tire regularly and replace worn compact spare tires with the same size and design, mounted on the same wheel.
- The compact spare tire should not be used on any other wheels, nor should standard tires, snow tires, wheel covers or trim rings be used with the compact spare wheel. If such use is attempted, damage to these items or other vehicle components may occur.
- Do not use more than one compact spare tire at a time.
Do not tow a trailer while the compact spare tire is installed.
Jack Label
Type A
Type B
Type C
* The actual Jack label in the vehicle may differ from the illustration. For more detailed specifications, refer to the label attached to the jack.
- Model Name
- Maximum allowable load
- When using the jack, set your parking brake
- When using the jack, stop the engine
- Do not get under a vehicle that is supported by a jack
- The designated locations under the frame
- When supporting the vehicle, the base plate of jack must be vertical under the lifting point
- Move the shift lever to the P position on vehicles with intelligent variable transmission
- The jack should be used on firm level ground
- Jack manufacturer
- Production date
- Representative company and address
FAQs
- Where is the spare tire located in the Kia Soul 2023?
The Kia Soul 2023’s spare tire is typically found in the trunk or beneath the cargo area. - What tools are provided for changing a tire in the Kia Soul 2023?
A spare tire, jack, lug wrench, and possibly other tools needed for tire changing are included with the Kia Soul 2023. - Can I use the standard jack that comes with the Kia Soul 2023 to change a tire?
Yes, you can use the jack that comes with the Kia Soul 2023 for this purpose since it is made specifically for changing tires. - How do I properly position the jack when changing a tire in the Kia Soul 2023?
The owner’s manual for the Kia Soul 2023 lists designated jack points. In accordance with the instructions provided, place the jack underneath the frame close to the flat tire. - Can I change a tire on a slope or uneven surface?
A level, stable surface is ideal for tire changes. Exercise caution or get professional help if you are on a slope or uneven surface. - Should I loosen the lug nuts before lifting the vehicle with the jack?
Yes, it is advised to remove the lug nuts from the flat tire before using a jack to lift the car. But wait until the car is lifted before completely removing the lug nuts. - How tight should I tighten the lug nuts when installing the spare tire?
Tighten the lug nuts manually at first, and then use the lug wrench to make them as tight as you can. Once the car is lowered, tighten the lug nuts even more by crisscrossing or star-patterning them with the lug wrench. - What is the recommended torque for tightening the lug nuts in the Kia Soul 2023?
The owner’s manual for the Kia Soul 2023 usually specifies the recommended torque for tightening the lug nuts. It’s critical to adhere to these recommendations for proper tightening. - How do I ensure the spare tire is properly inflated?
To check the pressure in the spare tire, use a tire pressure gauge. If the pressure is low, raise it to the level recommended in the owner’s manual or on the tire sidewall. - Can I drive long distances on the spare tire?
The Kia Soul 2023’s spare tire is only meant to be used momentarily. It is advised to avoid travelling great distances on the spare tire and to have the flat tire fixed or replaced as soon as possible. - What should I do with the flat tire after replacing it with the spare tire?
Place the flat tire in the car’s designated storage space and have a reputable tire shop replace or repair it. - Can I change a tire on the Kia Soul 2023 myself, or should I seek professional help?
If you feel confident and have the required tools and knowledge, you can change a tire on a Kia Soul 2023 by yourself. However, it is advised to seek professional advice or call for roadside assistance if you are unsure or uneasy. - How often should I check the condition and inflation of my spare tire?
It is advised to check the spare tire’s condition and inflation on a regular basis, such as before a long trip or during routine maintenance intervals. - Can I use the temporary tire repair kits instead of changing the tire?
In lieu of changing a tire, the Kia Soul 2023 might offer temporary tire repair kits. As long as you can’t get the tire professionally repaired or replaced, use the kit according to the instructions provided. - How long can I drive on a flat tire before it becomes damaged?
Driving on a flat tire can harm the tire irreparably and possibly other car parts as well. It is best to change a flat tire as soon as it is secure to do so rather than continuing to drive on it.
Useful Links
View Full User Guide: Kia Soul 2023 Owner’s Manual | Auto User Guide
Download Manuals: Kia | Owner’s Manuals and Documents