Kia Sportage 2022 Brake Fluid, Washer Fluid, Parking Brake, Air Cleaner Filter, Climate Control Air Filter, and Wiper Blades

A thorough inspection of all essential parts is required for the maintenance of the 2022 Kia Sportage. These parts include the air cleaner to protect engine health, the washer fluid to provide clean cabin air, the parking brake to ensure safe immobilization, and the brakes to ensure safe stopping power. Furthermore, keeping an eye on the state of the wiper blades ensures that the windscreen is effectively cleared during inclement weather. As a reflection of Kia’s dedication to long-term vehicle longevity and driver pleasure, these regular inspections and maintenance procedures are critical to vehicle safety, performance, and the overall driving experience.

2023 KIA SPORTAGE Specs, Price, Features and Mileage (Brochure)

Brake fluid

Checking the brake fluid level

 

Check the fluid level in the reservoir periodically. The fluid level should be between MAX (Maximum) and MIN (Minimum) marks on the side of the reservoir. Before removing the reservoir cap and adding brake fluid, clean the area around the reservoir cap thoroughly to prevent brake fluid contamination.

Proper fluid
Only use brake fluid in the brake system. Small amounts of improper fluids (such as engine oil) can cause damage to the brake system. Periodically check that the fluid level in the brake fluid reservoir is between MIN and MAX. The level will fall with accumulated mileage. This is a normal condition associated with the wear of brake linings. If the fluid level is excessively low, have the brake system checked by an authorized Kia dealer. Use only the specified brake fluid.(Refer to “Recommended lubricants and capacities” in chapter 8.) Never mix different types of fluid. In the event the brake system requires frequent additions of fluid, the vehicle should be inspected by an authorized Kia dealer. When changing and adding brake fluid, handle it carefully. Do not let it come in contact with your eyes. If brake fluid should come in contact with your eyes, immediately flush them with a large quantity of fresh tap water. Have your eyes examined by a doctor as soon as possible.

Brake fluid
Do not allow brake fluid to contact the vehicle’s body paint, as paint damage will result. Brake fluid, which has been exposed to open air for an extended time should never be used as its quality cannot be guaranteed. It should be disposed of properly.

Washer fluid

Checking the washer fluid level

The reservoir is translucent so that you can check the level with a quick visual inspection. Check the fluid level in the washer fluid reservoir and add fluid if necessary. Plain water may be used if washer fluid is not available. However, use a washer solvent with antifreeze characteristics in cold climates to prevent freezing.

Flammable fluid
Do not allow the washer fluid to come in contact with open flames or sparks. The windshield washer fluid reservoir is flammable under certain circumstances. This can result in a fire.

Coolant
Do not use radiator coolant or antifreeze in the washer fluid reservoir. Radiator coolant can severely obscure visibility when sprayed on the windshield and may cause loss of vehicle control.

Windshield fluid
Do not drink the windshield washer fluid. The windshield washer fluid is poisonous to humans and animals.

Parking brake

Checking the parking brake

Check whether the stroke is within specification when the parking brake pedal is depressed with 44 lbs, 196 N (20 kg) of force. Also, the parking brake alone should securely hold the vehicle on a fairly steep grade. If the stroke is more or less than specified, have the parking brake adjusted by an authorized Kia dealer.
Stroke: 4 ~ 5 notch

Air cleaner

Filter replacement

It must be replaced when necessary according to the Maintenance Schedule, and should not be washed. You can clean the filter when inspecting the air cleaner compartment. Clean the filter by using compressed air.

1. Pull out the air cleaner cover.
   
2. Unlock by turning the locking lever downward.
3. Pull the air cleaner filter to replace it.
   
4. Pull up the lever (1) to the LOCK position.
5.  Rise up the cover (2) until the hooks on the cover are securely fastened into the latches (3).
6. Check if the cover is firmly installed.

Replace the filter according to the Maintenance Schedule.
If the vehicle is operated in extremely dusty or sandy areas, replace the element more often than the usual recommended intervals. (Refer to “Maintenance under severe usage conditions” in this chapter.)

Air filter maintenance

• Do not drive with the air cleaner removed; this will result in excessive engine wear.
• When removing the air cleaner filter, be careful that dust or dirt does not enter the air intake, or damage may result.
• Use a Kia genuine part. The use of a non-genuine part could damage the airflow sensor.

CLIMATE CONTROL AIR FILTER

Filter inspection
The climate control air filter should be replaced according to the Maintenance Schedule. If the vehicle is operated in severely air-polluted cities or on dusty rough roads for a long period, it should be inspected more frequently and replaced earlier. When you replace the climate control air filter, replace it by performing the following procedure, and be careful to avoid damaging other components.

1. Open the glove box and remove the stoppers on both sides.
   
2. With the glove box open, pull the support strap (1).
   
3. Remove the climate control air filter cover while pressing the lock on the left side of the cover.
4. Replace the climate control air filter.
5. Reassemble in the reverse order of disassembly.
6. When replacing the climate control air filter install it properly. Otherwise, the system may produce noise and the effectiveness of the filter may be reduced.

Wiper blades

Blade inspection

Commercial hot waxes applied by automatic car washes have been known to make the windshield difficult to clean. Contamination of either the windshield or the wiper blades with foreign matter can reduce the effectiveness of the windshield wipers. Common sources of contamination are insects, tree sap, and hot wax treatments used by some commercial car washes. If the blades are not wiping properly, clean both the window and the blades with a good cleaner or mild detergent, and rinse thoroughly with clean water.

Wiper blades
To prevent damage to the wiper blades, do not use gasoline, kerosene, paint thinner, or other solvents on or near them.

Blade replacement

When the wipers no longer clean adequately, the blades may be worn or cracked, and require replacement. To prevent damage to the wiper arms or other components, do not attempt to move the wipers manually. The use of a non-specified wiper blade could result in wiper malfunction and failure.

Front windshield wiper blade

1. Raise the wiper arm and turn the wiper blade assembly to expose the plastic locking clip.

Wiper arms
Do not allow the wiper arm to fall against the windshield, since it may chip or crack the windshield.

1. Compress the clip and slide the blade assembly downward.
2. Lift it off the arm.
3. Install the blade assembly in the reverse order of removal.

Rear window wiper blade

1. Raise the wiper arm and pull out the wiper blade assembly
   
2. Install the new blade assembly by inserting the center part into the slot in the wiper arm until it clicks into place.
3. Make sure the blade assembly is installed firmly by trying to pull it slightly.
4. To prevent damage to the wiper arms or other components, have an authorized Kia dealer replace the wiper blade.

FAQ