Kia Sportage 2022 Instrument Cluster and LCD Display 

The 2022 Kia Sportage has an LCD display system and a modern, user-friendly instrument cluster that considerably improves the driving experience. The instrument cluster provides drivers with crucial information such as vehicle speed, fuel level, engine temperature, and more through a seamless integration of analogue and digital components. Additionally, it enables customization, letting drivers modify the display to suit their tastes. In the meantime, the LCD display system acts as the main center for infotainment, navigation, and vehicle settings thanks to its user-friendly touchscreen interface. Access is granted to advanced driver assistance settings, smartphone connectivity, the radio, and the built-in navigation system. The LCD display also supports voice control for hands-free operation and camera displays for improved parking assistance. The 2022 Kia Sportage ensures that drivers and passengers enjoy a seamless blend of information, entertainment, and convenience, improving the entire driving experience, thanks to these integrated features.

2023 KIA SPORTAGE Specs, Price, Features and Mileage (Brochure)

Instrument cluster

Instrument Cluster Control

Adjusting Instrument Cluster Illumination

The brightness of the instrument panel illumination is changed by pressing the illumination control button (“+” or “-”) when the ignition switch or Engine Start/Stop button is ON, or the taillights are turned on.

•  If you hold the illumination control button (“+” or “-”), the brightness will be changed continuously.
•  If the brightness reaches to the maximum or minimum level, an alarm will sound.

LCD Display Control

The LCD display modes can be changed by using the control buttons on the steering wheel.

1. : MODE button for changing the LCD MODES
2.  : MOVE scroll switch for select the items
3.  OK : SET/RESET button for set the items or reset the items

For the LCD modes, refer to “LCD Display” in this chapter.

Gauges

Speedometer

The speedometer indicates the speed of the vehicle and is calibrated in miles per hour (mph) and/or kilometres per hour (km/h).

Tachometer

The tachometer indicates the approximate number of engine revolutions per minute (rpm).
Use the tachometer to select the correct shift points and to prevent lugging and/or over-revving the engine.

Engine Coolant Temperature Gauge.

This gauge indicates the temperature of the engine coolant when the ignition switch or Engine Start/Stop button is ON.
If the gauge pointer moves beyond the normal range area toward the “H” position, it indicates overheating that may damage the engine.
Do not continue driving with an over-heated engine. If your vehicle over-heats, refer to “If the Engine Overheats” in chapter 6.

WARNING
Hot radiator
Never remove the radiator cap when the engine is hot. The engine coolant is under pressure and could cause severe burns. Wait until the engine is cool before adding coolant to the reservoir.

Fuel Gauge

This gauge indicates the approximate amount of fuel remaining in the fuel tank.

NOTICE

• The fuel tank capacity is given in chapter 7.
• The fuel gauge is supplemented by a low fuel warning light which will illuminate when the fuel tank is nearly empty.
• On inclines or curves, the fuel gauge pointer may fluctuate or the low fuel warning light may come on earlier than usual due to the movement of fuel in the tank.

WARNING
Fuel gauge
Stop and obtain additional fuel as soon as possible after the warning light comes on or when the gauge indicator comes close to the E level. Running out of fuel can expose vehicle occupants to danger.

CAUTION
Low fuel
Avoid driving with an extremely low fuel level. Running out of fuel could cause the engine to misfire damaging the catalytic converter.

NOTICE
Fuel display may not be accurate if you are filling in sloping places.

Odometer

The odometer Indicates the total distance that the vehicle has been driven and should be used to determine when periodic maintenance should be performed.

•  Odometer range : 0 ~ 999,999 miles or 1,599,999 km.

Outside Temperature Gauge

This gauge indicates the current out-side air temperatures by 1°F (1°C).

1. Temperature range : -40°F ~ 140°F (-40°C ~ 60°C)
   The outside temperature on the dis-play may not change immediately like a general thermometer to pre-vent the driver from being distracted.
   To change the temperature unit (from° C to °F or from °F to °C)

The temperature unit can be changed by using the “User Settings” mode of the LCD display.
For more details, refer to “LCD Display” in this chapter.

Transmission Shift Indicator

Automatic Transmission Shift Indicator

This indicator displays which automatic transmission shift lever is selected.

•  Park 😛
• Reverse : R
• Neutral : N
• Drive 😀
• Sports Mode : 1, 2, 3, 4, 5, 6

LCD DISPLAY (IF EQUIPPED)

LCD Modes

Modes	Symbol	Explanation
Trip Computer		This mode displays driving information such as the tripmeter, fuel economy, and so on. For more details, refer to “Trip Computer” in this chapter
Turn by Turn mode (if equipped)		This mode displays the state of the navigation.
Assist mode (if equipped)		This mode displays the state of below systems. SCC with S&G (Refer to “Smart Cruise Control with Stop & Go system” in chapter 5)  Lane Keeping Assist (Refer to “Lane keeping Assist (LKA) system” in chapter 5)    Driving Attention Warning (Refer to “Driving Attention Warning (DAW) system” in chap ter 5)  Tire Pressure(Refer to “Tire Pressure Monitoring System (TPMS)” in chapter 6) For more details, refer to chapter 5 and 6.
User Settings		On this mode, you can change settings of the doors, lamps and so on.
ESC (if equipped)		This mode displays the state of the ESC. For more details, refer to chapter 5.
Master warning mode		This mode informs of warning messages related to Low tire pressure or malfunction of Blind-spot Collision Warning and so on.

For controlling the LCD modes, refer to “LCD Display Control” in this chapter.

Trip computer mode

 

This mode displays driving information like the tripmeter, fuel economy, and so on.

For more details, refer to “Trip Computer” in this chapter.

Turn By Turn mode (if equipped)

This mode displays the state of the navigation.

Assist mode (if equipped)

Assist mode displays the state of below systems.

• SCC with S&G(if equipped)
• Lane Keeping Assist(if equipped)
• Driver Attention Warning (if equipped)
• Tire Pressure

Service mode

When Service Required is set, the remaining distance/time before service is required appears on the LCD screen.
From the point at which the remain-ing distance to drive amounts to 900 mi (1,500 km) or the remaining time amounts to 30 days, The Service Required message automatically displays and remains on the LCD screen for a number of seconds every time the ignition switch or Engine Start/Stop Button is ON.

When Service Required is set a Service Required Alarm message pops up when an aggregated amount of miles/time driven reaches a certain point.
With Service Required mode, press OK button for more than 1 sec. The values will return to initial setting values.

• For more details about Service Required Setting refer to user Settings Mode in this chapter.
•  Service Required Setting
  In the event of Battery Cable Disconnection or Fuse Switch turned OFF, the Service Required Setting values (an amount of miles/time driven) may change. In such cases, re-enter Service Required Setting values.

Master warning mode (if equipped)

• This warning light informs the driver of the following situations
•  LED head lamp malfunction (if equipped)
• Smart Cruise Control with Stop & Go malfunction (if equipped)
• Smart Cruise Control with Stop & Go radar blind (if equipped) Forward Collision-Avoidance Assist malfunction (if equipped)
• Blind-Spot Collision Warning radar blind (if equipped)
• Lamp malfunction
• High Beam Assist malfunction
• Tire Pressure Monitoring System (TPMS) malfunction

The Master Warning Light illumi-nates if one or more of the above warning situations occur.
If the warning situation is solved, the master warning light will be turned off.

2023 KIA SPORTAGE Specs, Price, Features and Mileage (Brochure)

User Settings Mode Description

On this mode, you can change set-ting of the doors, lamps, and so on.

WARNING
Do not adjust the User Setting while driving.
You may lose your steering control which could cause an accident and bodily injury.

Shift to P to edit settings

This warning message appears if you try to adjust the User Settings while driving.
For your safety, change the User Settings after parking the vehicle, applying the parking brake and moving the shift lever to P (Park).

Driver Assistance (if equipped)

•  SCC Reaction (if equipped) :
  •  Choose the sensitivity (fast, nor-mal, slow) of the smart cruise control.
•  For more details, refer to “Smart Cruise Control with Stop & Go” in chapter 5.
• Driver Attention Warning :
  • Choose the alert stage (High sensitivity/Normal sensitivity/Off) of the Driver Attention Warning.
• For more details, refer to “Driver Attention Warning (DAW)” in chapter 5.
•  Lane Safety :
  • Active LKA : To activate the active LKA mode.
  • Lane Keeping Assist : To activate the Lane Keeping Assist mode.
  • Lane Departure Warning : To activate the lane departure warning function.
•  For more details, refer to “Lane Keeping Assist (LKA) System” in chapter 5.
• Lane Safety :
  • Active LKA : To activate the active LKA mode.
  • Lane Keeping Assist : To activate the Lane Keeping Assist mode.
  • Lane Departure Warning : To activate the lane departure warning function.
• For more details, refer to “Lane Keeping Assist (LKA) System” in chapter 5.
• Forward Collision (if equipped) :
  Warning
  • Choose the initial warning alert time of the forward collision warn-ing. (Fast/Normal/Slow)
• For more details, refer to “Forward Collision-avoidance Assist (FCA)” in chapter 5.
• Rear Cross-Traffic Warning (if equipped) :
  Collision
  • If this item is checked, the rear cross-traffic collision Warning function will be activated.

For more details, refer to “Blind-spot Collision Warning” in chapter 5

• Blind-Spot Collision Warning Sound (if equipped) :
  • If this item is checked, the BCW sound function will be activated.

Door

• Auto Lock :
  • Enable on Speed : All doors will be automatically locked when the vehicle speed exceeds 9.3 mph (15 km/h).
  •  Enable on Shift (if equipped with Automatic transmission) : All doors will be automatically locked if the transmission shift lever is shifted from the P (Park) position to the R (Reverse), N (Neutral), or D (Drive) position. (With the Engine ON, it is activated.)
•  Auto Unlock :
  • Disable : The auto door unlock operation will be canceled.
  • Vehicle Off/On key out : All doors will be automatically unlocked when the ignition key is removed from the ignition switch or the Engine Start/Stop button is set to the OFF position.
  • On shift to P (if equipped with Automatic transmission) : All doors will be automatically unlocked if the automatic trans-mission shift lever is shifted to the P (Park) position. (With the Engine ON, it is activated.)
• Two Press Unlock (if equipped) :
  • If this item is checked, the two press unlock will be activated. Press the door unlock button once to unlock the driver’s door, and press the button once more within 4 seconds to unlock the rest of the doors.
• Power Liftgate (if equipped) :
  • If this item is checked, the power liftgate function will be activated.
• Smart Liftgate (if equipped) :
  • If this item is checked, the smart liftgate function will be activated.
•  For more details, refer to “Smart Liftgate” in this chapter.
  Lights
• One Touch Turn Signal :
  • Off: The one touch turn signal function will be deactivated.
  • 3, 5, 7 Flashes : The lane change signals will blink 3, 5 or 7 times when the turn signal lever is moved slightly.
    ❈ For more details, refer to “Lighting” in this chapter.
• Headlight Delay :
  • If this item is checked, the headlamp delay function will be activated.
• For more details, refer to “Lighting” in this chapter.
  Sound
• Cluster Voice Guidance Volume (if equipped) :
  • This used to set/adjust the voice guidance volume.
• Parking Distance Warning Volume (if equipped) :
  • Adjust the Park Assist System volume. (Level 1 ~ 3)
• Welcome Sound (if equipped) :
  • If this item is checked, the welcome sound function will be activated.
    Convenience
• Welcome Mirror/Light (if equipped) :
  • If this item is checked, the wel-come mirror/light function will be activated.
• Wireless Charging System (if equipped) :
  • If this is checked, the wireless charging system function will be activated.
• Wiper/Light Display (if equipped) :
  • If this item is checked, the wiper/light display will be activated.
•  Auto rear wiper (in R) (if equipped) :
  • If this is checked, the rear wiper will automatically activated when the front wiper is in ON position and shift lever is in R (reverse) position.
• Gear Position Pop-up (if equipped) :
  • If this item is checked, the gear position pop-up display will be activated.
•  Icy Road Warning (if equipped) :
  • If this item is checked, the icy road warning display will be activated.
    Service interval
• Enable Service Interval :
  • To activate or deactivate the service interval function.
• Adjust Interval :
  • To adjust the interval by mileage and period.
• Reset :
  • To reset the service interval function.
• NOTICE
  To use the service interval menu, consult an authorized Kia dealer.
  Other
• Fuel Economy Reset :
  • If this item is checked, the average fuel economy will reset automatically after refueling or after ignition.
• Speed Unit (if equipped) :
  • Choose the speed unit. (km, mi )
• Fuel Economy Unit :
  • Choose the fuel economy unit.(US gallon, UK gallon)
• Temperature Unit :
  •  Choose the temperature unit.(°C,°F)
• Tire Pressure Unit (if equipped) :
  • Choose the tire pressure unit.(psi, kPa, bar)

Language (if equipped)
Choose the language.
Reset
You can reset the menus in the User Settings Mode. All menus in the User Settings Mode are initialized, except language and service interval.

FAQ