2022 Kia Stinger Scheduled Maintenance Items and Checking Fluid Levels

Regularly performing scheduled maintenance and checking the fluid level in your 2022 Kia Stinger is an important part of being a responsible car driver. It helps the car last longer, run better, and be more reliable overall. The Stinger is Kia’s high-performance sport sedan, so it needs to be carefully maintained to keep its speed and safety on the road at their best. Regular oil changes to protect the engine’s health, tire rotations for even wear and longer tire life, air filter replacements to keep the air clean and the engine running efficiently, and brake inspections to make sure the car stops safely are all part of the vehicle’s scheduled maintenance. In addition to these important maintenance tasks, it is also very important to keep an eye on the amounts of fluids like engine oil, transmission fluid, brake fluid, power steering fluid, and coolant. These fluids keep the car running smoothly and help it last a long time. They are also very important for safety. By following Kia’s suggested maintenance plan and carefully checking fluid levels, Stinger owners can get the most out of their 2022 Kia Stinger, enjoying both thrilling performance and peace of mind on their road trip.

2023 Kia Stinger Specs, Price, Features, Mileage (Brochure)

Explanation of scheduled maintenance items

Engine oil and filter
The engine oil and filter should be changed at the intervals specified in the maintenance schedule. If the vehicle is being driven in severe conditions, more frequent oil and filter changes are required.

Drive belts
Inspect all drive belts for evidence of cuts, cracks, excessive wear or oil saturation and replace if necessary. Drive belts should be checked periodically for proper tension and adjusted as necessary.

Fuel filter (for gasoline)
Kia gasoline vehicle is equipped a lifetime fuel filter that is integrated with the fuel tank. Regular maintenance or replacement is not needed but depends on fuel quality. If there are some important safety matters like fuel flow restriction, surging, loss of power, hard starting problem etc., fuel filter inspection or replacement is needed.
The fuel filter be Inspected or replaced by an authorized Kia dealer.

Fuel lines, fuel hoses and connections
Check the fuel lines, fuel hoses and connections for leakage and damage. Have an authorized Kia dealer replace any damaged or leaking parts immediately.

Vapor hose and fuel filler cap
The vapour hose and fuel filler cap should be inspected at the intervals specified in the maintenance schedule. Make sure that a new vapor hose or fuel filler cap is correctly replaced.

Vacuum crankcase ventilation hoses
Inspect the surface of the hoses for evidence of heat and/or mechanical damage. Hard and brittle rubber, cracking, tears, cuts, abrasions, and excessive swelling indicate deterioration. Particular attention should be paid to examining those hose surfaces nearest to high heat sources, such as the exhaust manifold.
Inspect the hose routing to ensure that the hoses do not come in contact with any heat source, sharp edges or moving component which might cause heat damage or mechanical wear. Inspect all hose connections, such as clamps and couplings, to make sure they are secure, and that no leaks are present. Hoses should be replaced immediately if there is any evidence of deterioration or damage.

Air cleaner filter
A Genuine Kia air cleaner filter is recommended when the filter is replaced.

Spark plugs
Make sure to install new spark plugs of the correct heat range.
When assembling parts, be sure to wipe the inside and outside of the boot bottom of the ignition coil and the insulator of the spark plug with a soft cloth to prevent contamination of the spark plug insulator.

Valve clearance (if equipped)
Inspect excessive valve noise and/or engine vibration and adjust if necessary. An authorized Kia dealer should perform the operation.

Cooling system
Check the cooling system components, such as the radiator, coolant reservoir, hoses and connections for leakage and damage. Replace any damaged parts.

Coolant
The coolant should be changed at the intervals specified in the maintenance schedule.

Automatic transmission fluid
Automatic transmission fluid should not be checked under normal usage conditions.
But in severe conditions, the fluid should be changed at an authorized Kia dealer in accordance to the scheduled maintenance at the beginning of this chapter.

NOTICE
The automatic transmission fluid color is basically red.
As the vehicle is driven, the automatic transmission fluid will begin to look darker. It is normal condition and you should not judge the need to replace the fluid based upon the changed color.

CAUTION
Use only specified automatic transmission fluid. The use of a non-specified fluid could result in a transmission malfunction and failure. 

Brake hoses and lines
Visually check for proper installation, chafing, cracks, deterioration and any leakage. Replace any deteriorated or damaged parts immediately.

2023 Kia Stinger Specs, Price, Features, Mileage (Brochure)

NOTICE
NHTSA Safety Corrosion Alert NHTSA has warned all vehicle owners of all brands that they must maintain their vehicles in a manner which will prevent brake hose and brake line failures due to corrosion when such vehicles are exposed to winter road salt and related chemicals. While serious corrosion conditions typically only manifest themselves as safety issues after 7 years of vehicle use, the corrosion process starts immediately and thus underbody cleaning maintenance must commence from your vehicle’s first exposure to road salts and chemicals. NHTSA urges vehicle owners to take the following steps to prevent corrosion:

1. Wash the undercarriage of your vehicle regularly throughout the winter and do a thorough washing in the spring to remove road salt and other de-icing chemicals.
2. Monitor the brake system for signs of corrosion by having regular professional inspections and watching for signs of problems, including loss of brake fluid, unusual leaks and soft or spongy feel in the brake pedal.
3. Replace the entire brake pipe assembly if you find severe corrosion that causes scaling or flaking of brake components.

Brake fluid
Check the brake fluid level in the brake fluid reservoir. The level should be between MIN and MAX marks on the side of the reservoir. Use only hydraulic brake fluid con-forming to DOT 4 specifications.

Parking brake
Inspect the parking brake system including the parking brake pedal and cables.
Brake discs, pads and callipers
Check the pads for excessive wear, discs for run out and wear, and calipers for fluid leakage.

Exhaust pipe and muffler
Visually inspect the exhaust pipes, muffler and hangers for cracks, deterioration, or damage. Start the engine and listen carefully for any exhaust gas leakage. Tighten connections or replace parts as necessary.

Suspension mounting bolts
Check the suspension connections for looseness or damage. Retighten to the specified torque.

Steering gear box, linkage & boots/lower arm ball joint
With the vehicle stopped and the engine off, check for excessive free-play in the steering wheel.
Check the linkage for bends or damage. Check the dust boots and ball joints for deterioration, cracks, or damage. Replace any damaged parts.

Drive shafts and boots
Check the drive shafts, boots and clamps for cracks, deterioration, or damage. Replace any damaged parts and, if necessary, repack the grease.

Air conditioning refrigerant
Check the air conditioning lines and connections for leakage and damage.

Checking fluid levels

When checking engine oil, engine coolant, brake fluid, and washer fluid, always be sure to clean the area around any filler plug, drain plug, or dipstick before checking or draining any lubricant or fluid. This is especially important in dusty or sandy areas and when the vehicle is used on unpaved roads. Cleaning the plug and dipstick areas will prevent dirt and grit from entering the engine and other mechanisms that could be damaged.

FAQ