Kia Stinger 2022 Reverse Parking Distance Warning (PDW) 

In the 2022 Kia Stinger, the Reverse Parking Distance Warning system acts as a guardian angel for drivers navigating tight spaces and busy parking lots. It makes the often nerve-wracking act of parking in reverse an exact and stress-free task. This high-tech feature uses a complex network of sensors and technology to carefully watch the area behind the car. This makes sure that any hurdles or potential dangers are found and brought to the driver’s attention. This system is a great example of how committed Kia is to safety and innovation. It fits perfectly into the sleek design of the Stinger, and it gives both experienced and new drivers the reassurance and confidence they need to handle the challenges of reverse parking. It makes every maneuver smooth, safe, and calm.

Reverse Parking Distance Warning (PDW) (if equipped)

Reverse Parking Distance Warning will warn the driver if an obstacle is detected when the vehicle is backing up at low speeds.

WARNING

• Reverse Parking Distance Warning is a supplemental function. The operation of the function can be affected by several factors (including environmental conditions). It is the responsibility of the driver to always check the rearview before and while parking.
• Pay close attention when driving near objects, pedestrians, and especially children.
  Some objects may not be detected by the ultrasonic sensors due to the object’s distance, size or material, all of which can limit the effectiveness of the sensor.
•  Your new vehicle warranty does not cover any accidents or damage to the vehicle or injuries to its occupants.

Detecting sensor

Rear ultrasonic sensor

Refer to the picture above for the detailed location of the rear ultra-sonic sensors (1).

CAUTION

• Take the following precautions to  maintain optimal performance of the detecting sensor:
  •  Never disassemble the detecting sensors or sensor assembly, or apply any impact on it.
  •  If the detecting sensors have been replaced or repaired, have the system inspected by an authorized Kia dealer.
• Reverse Parking Distance Warning may not operate normally when:
  • Moisture is frozen on the sensor
  •  The sensor is covered with foreign matters, such as snow or water
• The function will operate normally when such foreign matters are removed.
•  Reverse Parking Distance Warning may malfunction when:
  • Driving on uneven roads, gravel roads or bushes
  • Objects that generates ultrasonic waves such as vehicle horns, loud motorcycle engine sound or truck air brakes are near the sensor
  • Heavy rain or water spray is present
  •  Wireless transmitters or mobile phones are present near the sensor
  •  The sensor is covered with snow
    Affected by another vehicle’s sensors
  •  Water flows on the surface of the sensor
  • Installing the license plate differently from the original location

when:

• •  The sensor is covered with foreign matters, such as snow or water
  • The weather is extremely hot or cold
• The function will operate normally when such foreign matters are removed.
•  The following objects may not be detected:
  •  Sharp or slim objects, such as ropes, chains or small poles
  • Objects, which tend to absorb sensor frequency, such as clothes, spongy material or snow
  • Objects smaller than 40 in. (1 m) in length and narrower than 6 in. (14 cm) in diameter

Function settings

Turning system ON/OFF (if equipped)

• Press the Parking Distance Warning Off button ( ) to turn the function on and off.
• Reverse Parking Distance Warning will turn on automatically when the gear is shifted to R (Reverse).
• If the vehicle speed exceeds 19 mph (30 km/h), the function and indicator will turn off. When the gear is shifted to R (Reverse), even if the button is repressed, the warning will not turn off and the system will operate to assist in safe parking.

Warning volume
With the ENGINE START/STOP button in the ON position, select ‘Driver Assistance → Warning Volume’ from the Settings menu to change the warning volume to ‘High’, ‘Medium’, ‘Low’ or ‘Off’ for Reverse Parking Distance Warning.
However, even if ‘Off’ is selected, the function volume will not turn off but the volume will sound as ‘Low’.
If you change the warning volume, the warning volume of other Driver Assistance systems may change.

Function operation

Operating conditions

•  This function will activate when backing up with the ignition switch ON. If the vehicle is moving at a speed over 3 mph (5 km/h), the function may not be activated correctly.
  •  The sensing distance while Reverse Parking Distance Warning is in operation is approximately 47 in. (120 cm).
  • When more than two objects are sensed at the same time, the  closest one will be recognized first.

Types of warning sound and indicator

•  The corresponding indicator will illuminate whenever each ultra-sonic sensor detects an object in its sensing range.
•  If an object is within 12 in. (30 cm) from the ultrasonic sensors, the sensors may not detect the object, or a sensor out of the detecting range may warn the driver.
• Distance warning may not occur sequentially depending on vehicle speed or obstacle shape.
•  Indicators and warning sounds may differ from the illustration when obstacles are located in the center of the sensor, obstacles are located in close proximity to the vehicle, or in various circumstances.

Function malfunction and precautions

Function malfunction
Reverse Parking Distance Warning has a self-diagnosis function that can determine whether the ultra-
the sonic sensor is working properly. After starting the engine, a beep will sound when the gear is shifted to P (Park) to indicate the function is operating normally.
However, if one or more of the following occurs, first check whether the ultrasonic sensor is damaged or whether the function is in a non-operating condition. If it still does not work properly, , have the system inspected by an authorized Kia dealer.

•  The audible warning does not sound.
•  The buzzer sounds intermittently
• The ‘Ultrasonic sensor error or blockage’ warning message appears on the cluster.

Function precautions

Reverse Parking Distance Warning may malfunction if the vehicle bumper height or ultrasonic sensor installation has been modified or damaged. Any non-factory installed equipment or accessories may also interfere with the sensor performance.
When the ultrasonic sensor is frozen or stained with snow, dirt, or water, the sensor may not operate until the stains are removed using a soft cloth.
Do not push, scratch, or strike the ultrasonic sensor. Sensor damage could occur.
Do not spray the ultrasonic sensors or their surrounding area directly with a high-pressure washer.

FAQ