Auto User Guide

2023 Kia Stinger Windshield Defrosting, Defogging And Storage Compartment

Kia-Logo

Kia Stinger 2023 Windshield Defrosting and Defogging User Guide

Windshield defrosting and defogging

Automatic climate control system

Kia-Stinger-2023-Windshield-Defrosting-and-Defogging-User-Guide-01

  1.  Set the fan speed to the desired position.
  2. Select desired temperature.
  3. Press the defroster button
  4.  The air conditioning will turn on according to the detected ambient temperature and outside (fresh) air position will be selected automatically.

If the air conditioning and outside (fresh) air position are not selected automatically, adjust the corresponding button manually. If the position is  selected, lower fan speed is adjusted to a higher fan speed.

2023 Kia Stinger Specs, Price, Features, Mileage (Brochure)

To defrost outside windshield

Kia-Stinger-2023-Windshield-Defrosting-and-Defogging-User-Guide-02

  1. Set the fan speed to the highest position.
  2. Set the temperature to the extreme hot (HI) position.
  3. Press the defroster button
  4. The air conditioning will turn on according to the detected ambient temperature and outside (fresh) air position will be selected automatically.

Operation tips

  • For maximum defrosting, set the temperature control to the extreme right/hot position and the fan speed control to the highest speed.
  •  If warm air to the floor is desired while
    defrosting or defogging, set the mode to the floor-defrost position.
  • Before driving, clear all snow and ice from the windshield, rear window, outside rear view mirrors, and all side windows.
  •  Clear all snow and ice from the hood and air inlet in the cowl grill to improve heater and defroster efficiency and to reduce the probability of fogging up the inside of the wind-shield.

WARNING
Windshield heating

Do not use the during cooling operation in extremely humid weather. The difference between the temperature of the outside air and the windshield could cause the outer surface of the windshield to fog up, causing loss of visibility. In this case, set the mode selection to the and fan speed control to the lower speed.

Defogging logic

To reduce the probability of fogging up the inside of the windshield, the air intake or air conditioning are controlled automatically according to certain conditions such as or position.
To cancel or return the defogging logic, do the following.

Automatic climate control system

Kia-Stinger-2023-Windshield-Defrosting-and-Defogging-User-Guide-02

  1. Turn the ENGINE START/STOP button to the ON position.
  2. Press the defroster button (
  3. While pressing the air conditioning button (A/C), press the air intake control button at least 5 times within 3
    seconds.
    The indicator on the air intake button will blink 3 times. It indicates that the defogging logic is canceled or returned to the programmed status.
    If the battery has been discharged or disconnected, it resets to the defog logic status.

Auto defogging system

Kia-Stinger-2023-Windshield-Defrosting-and-Defogging-User-Guide-04

Auto defogging reduces the possibility of fogging up the inside of the wind-shield by automatically sensing the moisture of inside the windshield.
Activation on washer fluid is activated when you select ‘Setup → Vehicle → Climate → Defog/Defrost Options → Auto Defog’ from the Infotainment System screen.

INFORMATION
The infotainment system may change after software updates. For more information, refer to the user`s manual pro-vided in the infotainment system and the quick reference guide.

Kia-Stinger-2023-Windshield-Defrosting-and-Defogging-User-Guide-05

This indicator illuminates when the auto defogging system senses the moisture of inside the windshield and operates.
If more moisture is in the vehicle, higher steps operate as follow.

(For European region)
Step 1: Outside air position
Step 2: Blowing air flow toward the wind-shield
Step 3: Increasing air flow toward the windshield
Step 4: Operating the air conditioning.

(For except European region)
Step 1: Operating the air conditioning.
Step 2: Outside air position
Step 3: Blowing air flow toward the wind-shield
Step 4: Increasing air flow toward the windshield
(Step could be changed according to the out side temperature)

To cancel or reset the Auto Defogging System
Press the front windshield defroster but-ton for 3 seconds when the ENGINE START/STOP button is in the ON position.
When the ADS system is canceled, Indicator on the button will blink 3 times per 0.5 sec and the position “ADS OFF” will be displayed on the climate control information screen.
When the ADS system is reset, Indicator on the button will blink 6 times per 0.25 sec and the position “ADS OFF” will be disappeared on the climate control information screen.
You can set or release the Auto Defogging System on the Climate Information selection screen. If the battery is discharged or detached, the auto defogging system will be reset. Adjust the feature accordingly.

CAUTION

  • Pressing one of Air intake recirculation, A/C OFF, Wind Direction Mode selection Buttons will deactivate the Auto Defogging System. To secure a driver’s vision, never push air recirculation, A/C OFF, Wind Direction But-tons while the Auto Defogging System is running.
  •  Do not forcibly remove the sensor cover on the top of windshield glass on the driver’s side in the car. Removing the cover can damage the sensor.

Automatic ventilation

The system automatically selects the outside (fresh) air position when the cli-mate control system operates over a certain period of time (approximately 30 minutes) in low temperature with the recirculated air position selected.

To cancel or reset the Automatic Ventilation
When the air conditioning system is on, select Face Level mode and while pressing the A/C button, press the recirculated air position button five times within three seconds.
When release the automatic ventilation function, the indicator will blink 3 times at 0.5 second intervals and air direction, air volume, Recirculation/Fresh mode, and air conditioner is automatically controlled. When it set the automatic ventilation function, the indicator will blink 6 times at 0.25 seconds intervals and air direction, air volume, Recirculation/Fresh mode, and air conditioner is automatically controlled. Features of your vehicle
Auto dehumidify is activated when you select ‘Setup → Vehicle → Climate → Automatic Ventilation → Auto dehumidify’ from the Infotainment System screen.
If the battery is discharged or detached, the automatic ventilation will be reset. Adjust the feature accordingly.

INFORMATION
The infotainment system may change after software updates. For more information, refer to the user`s manual pro-vided in the infotainment system and the quick reference guide.

Activate upon Washer Fluid Use

To prevent the odor from entering to inside the vehicle, the ventilation system changes to Recirculated Air Mode for a while when the windshield washer fluid sprayed.
However, at low outside temperature, to prevent from windshield fogging, the system continues to outside air mode.

System setting

  1. ENGINE START/STOP button is ON.
  2. Select Floor-Level ( ) air flow direction by pressing Mode Selection but-ton.
  3. With pressing Air Conditioning button, press the Recirculated Air button more than 4 times within 2 seconds.
  4.  If the system is set up, the indicator on Recirculated Air button will blinks 6 times.

System cancellation

  1.  ENGINE START/STOP button is ON.
  2. Select Floor-Level ( ) air flow direction by pressing Mode Selection but-ton.
  3.  With pressing Air Conditioning button, press the Recirculated Air button more than 4 times within 2 seconds.
  4.  If the system is cancelled, the indicator on Recirculated Air button will blinks 3 times.

Activation on washer fluid is activated when you select ‘Setup → Vehicle → Climate → Recirculate Air → Activate upon Washer Fluid Use’ from the Infotainment System screen.

INFORMATION
The infotainment system may change after software updates. For more information, refer to the user`s manual pro-vided in the infotainment system and the quick reference guide.

Recirculation Mode Plus (if equipped)

To prevent the inflow of polluted air indoors when passing through the tunnel and odor area, this function automatically switches the air conditioner to Recirculation Mode about 7 seconds before the vehicle enters the tunnel based on the map information of the navigation and the speed of the vehicle.

Operating Condition

    • Type of Road: Expressway,
    • Air Intake Condition: Fresh Mode You may activate or deactivate this function from the Infotainment System screen as ‘Setup → Vehicle → Climate → Recirculate Air → Recirculation Mode Plus

INFORMATION
The infotainment system may change after software updates. For more information, refer to the user`s manual provided in the infotainment system and the quick reference guide.

Sunroof inside air recirculation (if equipped)

The outside (fresh) air position is automatically selected, when the sunroof is opened.
When you select the recirculated air position, the system maintains the recirculated air position for 3 minutes and then automatically converts to the out-side (fresh) air position.
When the sunroof is closed, the air intake position will return to the original position that was selected.

Smart ventilation

The smart ventilation system maintains pleasant/fresh air condition inside the passenger compartment by automatically detecting/controlling the tempera-ture and humidity when you drive the vehicle with the climate control system in the OFF position.
When the smart ventilation system starts to operate, the message, “SMART VEN-TILATION ON” appears for 5 seconds.

  • The smart ventilation system stops operating, when the OFF button of the climate control system is selected.
  • The smart ventilation system stops operating, when any button of the cli-mate control system is selected for operation.
  • The smart ventilation system may not operate, when the vehicle is driven at low speed.
    Smart Ventilation is activated when you select ‘Setup → Vehicle → Climate → Automatic Ventilation →Smart Ventilation’ from the Infotainment System screen.

INFORMATION
The infotainment system may change after software updates. For more information, refer to the user`s manual pro-vided in the infotainment system and the quick reference guide.

Remote start

When the engine is restarted with remote start, the climate system is automatically set to 73°F (23°C) and operates.
For detailed information refer to “Smart key functions” on page 4-7.

Storage compartments

These compartments can be used to store small items required by the driver or passengers.

  • To avoid possible theft, do not leave valuables in the storage compart-ment.
  •  Always keep the storage compartment covers closed while driving. Do not attempt to place so many items in the storage compartment that the storage compartment cover can not close securely.

WARNING.

Flammable materials
Do not store, propane cylinders or other flammable/explosive materials in the vehicle. These items may catch fire and/or explode if the vehicle is exposed to hot temperatures for extended periods.

Center console storage

Kia-Stinger-2023-Storage-Compartments-User-Guide-02

To open the center console storage, pull up the lever.

Glove box

Kia-Stinger-2023-Storage-Compartments-User-Guide-01

The glove box can be locked and unlocked with a master key (1). (if equipped)
To open the glove box, pull the lever (2) and the glove box will automatically open. Close the glove box after use.

WARNING

Glove Box
To reduce the risk of injury in an accident or sudden stop, always keep the glove box door closed while driving.

NOTICE

If the temperature control knob is in the warm or hot position, warm or hot air will flow into the glove box.

KIA STINGER TOP BEST ITEMS

[amalinkspro_table id=”31693″ new-window=”on” nofollow=”on” addtocart=”off” /]

Reference Link

Kia Stinger 2023 User Guide
https://owners.kia.com/content/owners/en/manuals.html

Q: How does the windshield defrosting system in the 2023 Kia Stinger work?

A: The windshield defrosting system typically directs warm air onto the windshield to melt ice or frost and improve visibility during cold weather.

Q: Can I manually control the windshield defrosting settings?

A: Yes, you can often control the windshield defrosting settings through the vehicle’s climate control system, adjusting the fan speed and temperature.

Q: Is there a defogging feature for the windshield?

A: Yes, the Kia Stinger typically includes a windshield defogging feature, which directs warm air to clear condensation and fog from the windshield.

Q: Are there rear window defrosters in the Kia Stinger?

A: Yes, the Kia Stinger typically includes a rear window defroster with electrical heating elements to melt frost or ice on the rear window.

Q: How can I activate the rear window defroster?

A: You can usually activate the rear window defroster through a dedicated button or control on the vehicle’s dashboard.

Q: Is there a timer or automatic shutoff for the rear window defroster?

A: Some models may include a timer or automatic shutoff to prevent excessive energy consumption when using the rear window defroster.

Q: Can I use the rear window defroster while driving?

A: Yes, you can typically use the rear window defroster while driving to maintain clear visibility.

Q: Does the Kia Stinger have a heated windshield?

A: Some high-end Kia Stinger trims may offer a heated windshield, which can help melt ice and snow more efficiently.

Q: Is there a storage compartment for the windshield defrosting tools or ice scraper?

A: The Kia Stinger may include a storage compartment for windshield defrosting tools or an ice scraper, typically located in the trunk or another accessible area.

Q: Can I store other items in the storage compartment meant for defrosting tools?

A: While the compartment is designed for defrosting tools, you can often use it to store other small items or emergency supplies.

Q: Does the windshield defrosting system work in all weather conditions?

A: The system is designed to work effectively in various weather conditions, but extremely low temperatures may require additional time for optimal defrosting.

Q: Are there maintenance considerations for the windshield defrosting system?

A: To maintain the system’s functionality, ensure that the heating elements or vents are not obstructed, and check for any damaged wiring or connections.

Q: Is the windshield defrosting system covered by the vehicle’s warranty?

A: The windshield defrosting system is typically covered under the vehicle’s warranty, but warranty terms and coverage can vary, so it’s advisable to review Kia’s warranty information for specific details.

Q: Can I add aftermarket windshield defrosting features to the Kia Stinger?

A: It may be possible to add aftermarket windshield defrosting features, but it’s advisable to consult a professional installer for proper installation and compatibility.

Q: Are there any specific storage tips for the compartment meant for defrosting tools?

A: Ensure that the storage compartment is kept clean and free from moisture to prevent damage to the tools or items stored inside.

Leave a Reply

Your email address will not be published. Required fields are marked *