2022 Kia Telluride Head-Up Display, Rear View, and Surround View Monitor

The 2022 Kia Telluride stands out as the pinnacle of cutting-edge car technology. It has three incredible features that will make driving more enjoyable: The kia telluride heads up display, the Rear View Monitor, and the Surround View Monitor. The kia telluride heads up display projects important driving information onto the window in a way that looks like something from the future. This keeps the driver’s attention on the road. In addition, the Rear View Monitor gives you a clear view of what’s behind the car, which helps you park and reverse. The Surround View Monitor uses a network of cameras to give you a bird’s-eye view, which is very helpful in tight parking spaces or off-road situations. The 2022 Kia Telluride is committed to providing a technologically advanced and user-centered driving experience. These new features seamlessly blend modernity, safety, and convenience.

2023 Kia Telluride Specs, Price, Features, and Mileage (Brochure)

Kia Telluride heads-up display(HUD)

The Head-Up Display (HUD) is a transparent display that projects an image of certain information from the instrument cluster and navigation system on the windshield glass.

•  The Kia Telluride Hud image on the HUD  screen may not be visible when:
  • Sitting posture prevents visibility.
  • Wearing a polarized sunglasses.
  • There is an object on the cover of the Head-Up Display.
  • Driving on a wet road.
  • Lighting is turned on inside the vehicle.
  • Light is entering the vehicle from the outside.
  • Wearing inadequate glasses for your eyesight.
•  If the HUD image is not displayed well, adjust the height, rotation or illumination of the HUD in the cluster.
• When the HUD needs inspection or repair, have your vehicle inspected or repaired by an authorized Kia dealer.

Kia Telluride Hud ON/OFF

The HUD display can be activated or deactivated in user setting mode while the engine is ON.

WARNING
Head-Up Display
The Head-Up Display is a supplemental system. Do not solely rely on the system, always drive safely, and pay attention to the driving conditions on the road.

HUD Information.

1. Turn By Turn navigation information (if equipped)
2.  Road signs (if equipped)
3. Speedometer
4.  SCC setting speed (if equipped)
5. SCC Vehicle Distance information (if equipped)
6. Lane Safety information (if equipped)
7. Blind-spot safety information (if equipped)
8. Highway Driving Assist information (if equipped)
9. Lane Following Assist information (if equipped)
10. Highway Auto Speed Change information (if equipped)
11. Warning lights (low fuel)
12. AV mode information

Road signs and Turn By Turn navigation information are available depending on the region.

2023 Kia Telluride Specs, Price, Features, and Mileage

Kia Telluride Hud Setting
On the LCD display, you can change the HUD settings as follows.

1. Display height
2. Rotation
3. Brightness
4. Content selection
5. Speedometer size
6. Speedometer color

Rear View Monitor (RVM) (if equipped)

Rear View Monitor is a supplemental function that shows the area behind the vehicle on the multimedia system screen to assist you when parking or backing up.
For detailed information, refer to a separately supplied manual.

• Rear View Monitor with parking guidance will activate when the engine is running and the shift lever is in the R (Reverse) position.
• To assist in parking, the rear view is shown (the parking guide line disappears) on the screen when the shift lever is moved from R (Reverse) to D (Drive) with vehicle speed below 10 mph (15 km/h).

Rear View Monitor Top view

When you touch the icon (1), the top view is displayed on the screen and shows the distance from the vehicle in the back of your vehicle. Touch the icon (1) again, to switch back to the previous screen.

WARNING
Backing & using camera
Never rely solely on the rearview camera. You must always use methods of viewing the area behind you including looking over both shoulders as well as continuously checking all three rear view mirrors. Due to the difficulty of ensuring that the area behind you remains clear, always back up slowly and stop immediately if you suspect that a person, and especially a child, might be behind you.

NOTICE

•  Do not spray the camera or its surrounding area directly with a high-pressure washer. Shock applied from high-pressure water may cause the device to not operate normally.
• Do not use any cleanser containing acid or alkaline detergents when cleaning the lens. Use only a mild soap or neutral detergent, and rinse thoroughly with water.
• If the camera lens is covered with foreign material, Rear View Monitor may not operate normally. Always keep the camera lens clean.
  However, do not use chemical solvents such as strong detergents containing high alkaline or volatile organic solvents (gasoline, acetone etc.). This may damage the camera lens.
• When your vehicle has not been operated for a long time or has been parked in an indoor parking space in winter, the image may be temporarily blurred due to exhaust fumes.

Surround View Monitor (SVM) (if equipped)

Surround View Monitor is the parking support function that shows your surroundings around the vehicle.
For detailed information, refer to a separately supplied manual.

• The function is activated when the following steps are performed.

1. . The Parking/View button (1, indicator ON) is pressed.
2. The shift lever is in D (Drive), N (Neutral), or R (Reverse) and the vehicle speed is under 10 mph (15 km/h).

•  The function is deactivated when one of the following is performed.
  • The Parking/View button (1, indicator OFF) is pressed again.
  • Vehicle speed is over 10 mph (15 km/h).
• When vehicle speed is over 10 mph (15 km/h), the function will turn off.
  The function will not automatically turn on again, even though vehicle speed gets below 10 mph (15 km/h).
  Press the Parking/View button (1, indicator ON) again, to turn on the function.
• When the vehicle is backing up, the function will turn ON regardless of vehicle speed or button status however, if the vehicle speed is over 10 mph (15 km/h) when driving forward, Surround View Monitor will turn off.
  • An indicator on the screen appears
  • The liftgate is opened.
  • The driver’s door is opened.
  •  The passenger’s door is opened.
  • The outside rearview mirror is folded.
• If the function is not operating normally, the function should be checked by an authorized Kia dealer.

FAQ