Kia Telluride 2023 Brake, Washer Fluid, Air Cleaner Filter, Climate Control Air Filter and Wiper Blades

The Kia Telluride 2023 is a mid-size SUV that is packed with various features to improve your driving experience, including brake fluid, washer fluid, air cleaner filter, climate control air filter, and wiper blades. The brake fluid serves to transmit the force from the brake pedal to the brake callipers, while the washer fluid helps to clean the windshield and rear window. The air cleaner filter and climate control air filter work together to keep the air inside the cabin clean, and the wiper blades are responsible for clearing the windshield of debris, rain, and snow. This guide aims to provide answers to frequently asked questions about the Kia Telluride 2023 brake fluid, washer fluid, air cleaner filter, climate control air filter, and wiper blades. We will delve into how to check and replace these components, as well as explain their significance in ensuring that your vehicle operates safely and efficiently.

2023 Kia Telluride Specs, Price, Features, Milage (brochure)

Brake fluid

The brake fluid acts to transmit force to the brake when the driver depresses the brake pedal. Brake fluid must be maintained periodically to ensure that the brakes operate smoothly.

Checking the brake fluid level

Check the fluid level in the reservoir periodically. The fluid level should be between MAX and MIN marks on the side of the reservoir.

1. Before removing the reservoir cap and adding brake fluid, clean the area around the reservoir cap thoroughly to prevent brake fluid contamination.
   CAUTION
   Proper fluid
   Only use brake fluid in the brake system. Small amounts of improper fluids can cause damage to the brake system.
2. Periodically check that the fluid level in the brake fluid reservoir is between MIN and MAX. The level will fall with accumulated mileage. This is a normal condition associated with the wear of the brake linings. If the fluid level is excessively low, have the brake system checked by an authorized Kia dealer. Use only the specified brake fluid.
   Never mix different types of fluid. In the event the brake system requires frequent additions of fluid, the vehicle should be inspected by an authorized Kia dealer.
   When changing and adding brake fluid, handle it carefully. Do not let it come in contact with your eyes. If brake fluid should come in contact with your eyes, immediately flush them with a large quantity of fresh tap water. Have your eyes examined by a doctor as soon as possible.

CAUTION
Brake fluid
Do not allow brake fluid to contact the vehicle’s body paint, as paint damage will result.
Brake fluid, which has been exposed to open air for an extended time should never be used as its quality cannot be guaranteed. It should be disposed of properly.

CAUTION
To maintain your vehicle’s best brake and ABS/ESC performance, use Kia genuine brake fluid as in the specification. (Classification : SAE J1704 DOT4 LV, ISO4925 CLASS-6,FMVSS116 DOT-4)

Washer fluid

Washer fluid is used when wiping the windshield of the vehicle with a wind-shield wiper. You should check and refill washer fluid periodically to make sure that it doesn’t run out.

Checking the washer fluid level

The reservoir is translucent so that you can check the level with a quick visual inspection.

• Check the fluid level in the washer fluid reservoir and add fluid if necessary. Plain water may be used if washer fluid is not available. However, use washer solvent with antifreeze characteristics in cold climates to pre-vent freezing.

WARNING
Flammable Fluid
Do not allow the washer fluid to come in contact with open flames or sparks. The windshield washer fluid reservoir is flammable under certain circumstances. This can result in a fire.

WARNING
Coolant

• Do not use radiator coolant or anti-freeze in the washer fluid reservoir.
• Radiator coolant can severely obscure visibility when sprayed on the wind shield and may cause loss of vehicle control.

WARNING
Windshield fluid
Do not drink the windshield washer fluid. The windshield washer fluid is poisonous to humans and animals.

Air cleaner filter

A Genuine Kia air cleaner filter is recommended when the filter is replaced.

Replacing air cleaner filter

Air cleaner filter must be replaced when necessary, and should not be washed.

You can clean the filter when inspecting the air cleaner compartment. Clean the filter by using compressed air.

1. Pull out the air cleaner cover.
   
2.  Unlock by turning the locking lever downward.
   
3. Pull the air cleaner filter to replace.
   
4. Lock the cover with the reverse order.

Replace the filter according to the Maintenance Schedule. If the vehicle is operated in extremely dusty or sandy areas, replace the element more often than the usual recommended intervals.

CAUTION
Air filter maintenance

• Do not drive with the air cleaner removed; this will result in excessive engine wear.
•  When removing the air cleaner filter, be careful that dust or dirt does not enter the air intake, or damage may result.
•  Use a Kia genuine part. Use of a non-genuine part could damage the airflow sensor.

Climate control air filter

The climate control air filter should be replaced according to the maintenance schedule. If the vehicle is operated in severely air-polluted cities or on dusty rough roads for a long period, it should be inspected more frequently and replaced earlier.

Inspecting and replacing climate control air filter

When you replace the climate control air filter, replace it performing the following procedure. Be careful to avoid damaging other components.

1. Open the glove box and remove the stoppers on both sides.
   
2. With the glove box open, pull the pin and the support strap (1).
   
3.  Remove the climate control air filter cover while pressing the lock on the upper side of the cover.
   
4. Replace the climate control air filter.
   
5. Reassemble in the reverse order of disassembly.
   When replacing the climate control air filter install it properly. Otherwise, the system may produce noise and the effectiveness of the filter may be reduced.

Wiper blades

When the wipers no longer clean adequately, the blades may be worn or cracked, and require replacement. To prevent damage to the wiper arms or other components, do not attempt to move the wipers manually. The use of a non-specified wiper blade could result in wiper malfunction and failure.

Blade inspection

Commercial hot waxes applied by auto-matic vehicle washes have been known to make the windshield difficult to clean.
Contamination of either the windshield or the wiper blades with foreign matter can reduce the effectiveness of the windshield wipers. Common sources of contamination are insects, tree sap, and hot wax treatments used by some commercial vehicle washes. If the blades are not wiping properly, clean both the window and the blades with a good cleaner or mild detergent, and rinse thoroughly with clean water.

Front windshield wiper blade

To inspect or replace the windshield wiper blades and to prevent damaging the hood, move the windshield wiper blades to the service position as follows;

• After turning off the engine, move the wiper switch to the single wiping (MIST) position within 20 seconds and hold the switch more than 2 seconds until the wiper blade is in the fully up position

Replacing front windshield wiper blade

Type A

1. Raise the wiper arm and turn the wiper blade assembly to expose the plastic locking clip.
   
   CAUTION
   Wiper arms
   •  Do not allow the wiper arm to fall against the windshield, since it may chip or crack the windshield.
   •  Do not pull wiper arm forward, since arm could chip hood paint.
2. Compress the clip and slide the blade assembly downward.
   
3. Lift it off the arm.
   
4. Install the blade assembly in the reverse order of removal.
   Type B
   1. Raise the wiper arm.
   2. Lift up the wiper blade clip (1). Then pull down the blade assembly and remove it (2).
      
   3.  Install the new blade assembly.
      
   4. Return the wiper arm on the wind-shield.
   5. Turn ignition to the ON position and wiper arms will return to the normal operating position.

Replacing rear window wiper blade

1. Raise the wiper arm and pull out the wiper blade assembly.
   
2.  Install the new blade assembly by inserting the centre part into the slot in the wiper arm until it clicks into place.
   
3.  Make sure the blade assembly is installed firmly by trying to pull it slightly.
   To prevent damage to the wiper arms or other components, have an authorized Kia dealer replace the wiper blade.

FAQ

How often should I check the brake fluid level on my Kia Telluride 2023?
Kia recommends checking the brake fluid level every 12 months or 7,500 miles, whichever comes first.

What type of brake fluid should I use for my Kia Telluride 2023?
Kia recommends using DOT 3 or DOT 4 brake fluid.

How often should I replace the brake fluid on my Kia Telluride 2023?
Kia recommends replacing the brake fluid every 24 months or 30,000 miles, whichever comes first.

How often should I check the washer fluid level on my Kia Telluride 2023?
Kia recommends checking the washer fluid level every time you refuel your vehicle.

What type of washer fluid should I use for my Kia Telluride 2023?
Kia recommends using a windshield washer fluid with antifreeze properties.

How often should I replace the air cleaner filter on my Kia Telluride 2023?
Kia recommends replacing the air cleaner filter every 30,000 miles or 36 months, whichever comes first.

How often should I replace the climate control air filter on my Kia Telluride 2023?
Kia recommends replacing the climate control air filter every 15,000 miles or 12 months, whichever comes first.

What type of air cleaner filter should I use for my Kia Telluride 2023?
Kia recommends using a genuine Kia air cleaner filter.

What type of climate control air filter should I use for my Kia Telluride 2023?
Kia recommends using a genuine Kia climate control air filter.

How often should I replace the wiper blades on my Kia Telluride 2023?
Kia recommends replacing the wiper blades every 6 to 12 months, depending on usage and environmental conditions.

What type of wiper blades should I use for my Kia Telluride 2023?
Kia recommends using genuine Kia wiper blades.

How do I check the brake fluid level on my Kia Telluride 2023?
You can check the brake fluid level by looking at the transparent reservoir located on the driver side of the engine compartment.

How do I check the washer fluid level on my Kia Telluride 2023?
You can check the washer fluid level by looking at the level gauge located on the washer fluid reservoir.

How do I replace the air cleaner filter on my Kia Telluride 2023?
You can replace the air cleaner filter by following the instructions in your vehicle owner’s manual.

How do I replace the wiper blades on my Kia Telluride 2023?
You can replace the wiper blades by following the instructions in your vehicle owner’s manual or by consulting a Kia service professional.

Useful Link

View Full User Guide: Kia Telluride 2023 User Guide
Download Manuals: https://owners.kia.com/content/owners/en/manuals.html
2023 Kia Telluride Specs, Price, Features, Milage (brochure)