Warning Symbols and Indicator: 2017 Kia NIRO Cluster Guide
The 2017 Kia Niro cluster’s warning signals and indicators are essential components for giving drivers up-to-date knowledge about the condition of the car and possible problems. With a wide variety of symbols, the cluster conveys vital information on the condition of the engine, tires, batteries, safety systems, and other vital parts. Drivers can immediately grasp the information because to the intuitive design and clear visual cues, which enables them to respond promptly to any emergent concerns. The 2017 Niro’s instrument cluster features warning symbols that have been carefully integrated by Kia, demonstrating the company’s dedication to both safety and user-friendly technology. This feature enhances driving safety and knowledge.
2022 Kia Niro Specs, Price, Features, Mileage (Brochure)
INSTRUMENT CLUSTER
- Type A
- Type B
The above illustration is a sample for explanation only. Actual instrument panel may be different. For specifics, please refer to the actual instrument panel in your car and relevant in this section.
- Hybrid system gauge
- Fuel gauge
- Speedometer
- Warning and indicator lights
- LCD window
- Battery SOC (State of Charge) gauge
- Distance To Empty
❈ For more details, refer to the “Gauges” in this chapter.
Instrument Cluster Control
Adjusting Instrument Cluster Illumination (if equipped)
WARNING
Never adjust the instrument cluster while driving. This could result in loss of control and lead to an accident that may cause death, serious injury, or property damage.
The brightness of the instrument panel illumination is changed by pressing the illumination control button (“+” or “-”) when the ignition switch or Engine Start/Stop button is ON, or the tail lights are turned on.
- If you hold the illumination control button (“+” or “-”), the brightness will be changed continuously.
- If the brightness reaches to the maximum or minimum level, an alarm will sound.
LCD window control
The LCD window modes can be changed by using the control buttons on the steering wheel.
- : MODE button for change the LCD MODES
- / : MOVE scroll switch for select the items
- OK : SET/RESET button for set the items or reset the items
❈ For the LCD modes, refer to “LCD window” in this chapter.
Gauges
Speedometer
The speedometer indicates the speed of the vehicle and is calibrated in miles per hour (mph) and/or kilometers per hour (km/h).
Hybrid System Gauge
The hybrid system gauge indicates whether the current driving condition is fuel efficient or not.
- CHARGE: This shows that the energy made by the vehicle is being converted to electrical energy. (Regenerated energy)
- ECO: Shows that the vehicle is being driven in an Eco-friendly manner.
- POWER: Shows that the vehicle is exceeding the Ecofriendly range.
✽ NOTICE
In accordance with the hybrid system gauge area the “EV” indicator comes on or off.
- “EV” indicator ON: The vehicle is driven using the electric motor or the gasoline engine is stopped.
- “EV” indicator OFF: The vehicle is driven using the gasoline engine.
Hybrid Battery SOC (State of Charge) Gauge
This gauge indicates the remaining hybrid battery power. If the SOC is near the “L (Low) or 0” level, the vehicle automatically operates the engine to charge the battery.
Fuel Gauge
This gauge indicates the approximate amount of fuel remaining in the fuel tank.
✽ NOTICE
- The fuel tank capacity is given in chapter 9.
- The fuel gauge is supplemented by a low fuel warning light, which will illuminate when the fuel tank is nearly empty.
- On inclines or curves, the fuel gauge pointer may fluctuate or the low fuel warning light may come on earlier than usual due to the movement of fuel in the tank.
WARNING – Fuel Gauge
Running out of fuel can expose vehicle occupants to danger. You must stop and obtain additional fuel as soon as possible after the warning light comes on or when the gauge indicator comes close to the “0 or E (Empty)” level.
CAUTION
Avoid driving with a extremely low fuel level. Running out of fuel could cause the engine to misfire damaging the catalytic converter.
Distance To Empty
- The distance to empty is the estimated distance the vehicle can be driven with the remaining fuel.
- Distance range: 1~9,999 km or 1~9,999 mi.
- If the estimated distance is below 1 km (1 mi.), the trip computer will display “—” as distance to empty.
- If the level of the remaining fuel is more than three-quarters, more than 3 liters of fuel must be refilled for the fuel gauge to change. In other cases, more than 6 liters of fuel must be refilled for the vehicle to change the fuel gauge.
NOTICE
- If the vehicle is not on level ground or the battery power has been interrupted, the distance to empty function may not operate correctly.
- The distance to empty may differ from the actual driving distance as it is an estimate of the available driving distance.
- The fuel economy and distance to empty may vary significantly based on driving conditions, driving habits, and condition of the vehicle.
Odometer
The odometer Indicates the total distance that the vehicle has been driven and should be used to determine when periodic maintenance should be performed.
– Odometer range : 0 ~ 1,599,999 km or 999,999 miles.
Outside Temperature Gauge
This gauge indicates the current outside air temperatures by 1°C (1°F).
- Temperature range : -40°C~ 60°C (- 40°F ~ 140°F)
The outside temperature on the display may not change immediately like a general thermometer to prevent the driver from being inattentive. The temperature unit can be changed by using the “User Settings” mode of the LCD window.
❈ For more details, refer to “LCD window” in this chapter.
Dual clutch transmission shift indicator
This indicator displays which shift lever is selected.
- Park 😛
- Reverse : R
- Neutral : N
- Drive 😀
- Sports mode (if equipped) : S
Dual clutch transmission shift indicator in sports mode
(for Europe, if equipped) If the driver selects “Sports mode” and changes gear, both higher and lower, the gear will automatically change to manual “Sports mode”. Depending on the selected gear, the gear display range will be from 1 to 6.
FAQs
The 2017 Kia Niro cluster features a variety of warning symbols covering aspects such as engine health, tire pressure, battery status, and safety systems.
Urgent warning symbols typically illuminate in red or flash, indicating immediate attention is required, while routine notifications may appear in yellow or provide less urgent visual cues.
Yes, the cluster displays symbols for issues like low tire pressure, engine malfunctions, and other critical concerns, allowing drivers to address problems promptly.
Depending on the model, there may be specific symbols dedicated to safety features such as airbags, ABS (Anti-lock Braking System), and other advanced safety systems.
The cluster enhances safety by providing immediate alerts and warnings about potential issues, allowing drivers to take corrective action and maintain the vehicle’s safety systems.
Yes, some warning symbols in the cluster may be accompanied by audible alerts to draw immediate attention to critical issues or warnings.
The level of customization varies, but some models may allow drivers to configure certain settings or preferences for warning alerts in the cluster.
The cluster often adjusts its brightness automatically or manually to ensure optimal visibility in varying lighting conditions, enhancing the driver’s ability to see warning symbols clearly.
If a warning symbol persists, despite addressing the issue, consult with a Kia service professional to ensure proper diagnosis and resolution of any underlying problems.
Yes, online forums and communities for Kia Niro owners often provide discussions and insights into warning symbols, sharing experiences and troubleshooting tips.
While not explicitly monitoring fuel efficiency, the cluster indirectly contributes by displaying real-time information about engine health and performance, allowing drivers to address issues affecting fuel efficiency.
Yes, the cluster may display symbols or notifications for routine maintenance tasks, such as oil changes or tire rotations, helping drivers stay on top of scheduled services.
Yes, the cluster symbols are a valuable tool for identifying and addressing recurrent issues by providing immediate alerts and warnings related to specific components or systems.