2020 KTM 350 EXC-F Six Days
The 2020 KTM 350 EXC-F Six Days is a great example of how cutting-edge technology and tough strength can work together. This off-road motorcycle is the result of KTM’s unwavering dedication to speed and new ideas. It was made to handle the toughest terrains. The name “Six Days” comes from the tough International Six Days Enduro (ISDE) race, which is a true test of both man and machine. The EXC-F has a powerful 350cc four-stroke engine that gives it a great mix of power and maneuverability. Its lightweight frame and top-quality suspension parts make it very responsive and easy to control. The 2020 KTM 350 EXC-F Six Days, with its exclusive Six Days graphics and high-end features, embodies KTM’s racing history and is a sought-after companion for riders who want the best in off-road skill and longevity.
SERIAL NUMBERS
(All Six Days models, All EU/BR/CN models, 350 EXC‑F AR)
This vehicle has been designed and built to withstand the normal stresses and strains of racing. This vehicle complies with the currently valid regulations and categories of the top international motorsports organizations.
The key number 1 for the steering lock is stamped onto the key connector. Engine number embossed on the left side of the engine over the engine sprocket. The fork part number is stamped on the inner side of the fork stub. The shock absorber article number is stamped on the top of the shock absorber above the adjusting ring towards the engine side.
(XCF‑W)
Clutch lever1 is fitted on the handlebar on the left. The clutch is activated hydraulically and adjusts itself automatically.
Info
This vehicle is not approved for use on public roads. This vehicle complies with the Californian and EPA emission requirements for offroad motorcycles. This vehicle is not designed for use in racing on closed circuits or for Motocross use.
(XCF‑W)
The stop button is fitted on the left side of the handlebar.
Possible states
- The stop button is in the basic position – In this position, the ignition circuit is closed and the engine can be started.
- Stop button pressed – In this position, the ignition circuit is interrupted, a running engine stops, and a non-running engine will not start.
Safety advice
A number of safety instructions need to be followed to operate the product described safely. Therefore read this instruction and all further instructions included carefully. The safety instructions are highlighted in the text and are referred to in the relevant passages.
Info
Various information and warning labels are attached in prominent locations on the product described. Do not remove any information or warning labels. If they are missing, you or others may not recognize the dangers and may therefore be injured.
Danger
Identifies a danger that will immediately and invariably lead to fatal or serious permanent injury if the
appropriate measures are not taken.
Warning
Identifies a danger that is likely to lead to fatal or serious injury if the appropriate measures are not
taken.
Caution
Identifies a danger that may lead to minor injuries if the appropriate measures are not taken.
Note
Identifies a danger that will lead to considerable machine and material damage if the appropriate measures are
not taken.
Note
Indicates a danger that will lead to environmental damage if the appropriate measures are not taken.
Tampering warning
Tampering with the noise control system is prohibited. Federal law prohibits the following acts or the causing thereof:
- The removal or rendering inoperative by any person other than for purposes of servicing, repair, or replacement, of any device or element of design incorporated into any new vehicle for the purpose of noise control prior to its sale or delivery to the ultimate purchaser or while it is in use, or 2 the use of the vehicle after such device or element of design has been removed or rendered inoperative by any person.
Among those acts presumed to constitute tampering are the acts listed below:
- Removal or puncturing of the main silencers, baffles, manifolds or any other components which conduct exhaust gases.
- Removal or puncturing of parts of the intake system.
- Lack of proper maintenance.
- Replacing moving parts of the vehicle, or parts of the exhaust system or intake system, with parts other than those specified by the manufacturer.
(XCF‑W)
An add-on or modified part must be compliant with applicable ARB evaporative emission control standards. A
violation of this requirement is punishable by civil and/or criminal punishment.
Safe operation
Danger
The danger of accidents A rider who is not fit to ride poses a danger to him or herself and others.
- Do not operate the vehicle if you are not fit to ride due to alcohol, drugs or medication.
- Do not operate the vehicle if you are physically or mentally impaired.
Danger
The danger of poisoning Exhaust gases are toxic and inhaling them may result in unconsciousness and death.
- Always make sure there is sufficient ventilation when running the engine.
- Use effective exhaust extraction when starting or running the engine in an enclosed space.
Warning
The danger of burns Some vehicle components become very hot when the vehicle is operated.
- Do not touch any parts such as the exhaust system, radiator, engine, shock absorber, or brake system before the vehicle parts have cooled down.
- Let the vehicle parts cool down before you perform any work on the vehicle.
Only operate the vehicle when it is in perfect technical condition, in accordance with its intended use, and in a safe and environmentally compatible manner. An appropriate driver’s license is needed to ride the vehicle on public roads. Have malfunctions that impair safety promptly eliminated by an authorized KTM workshop. Adhere to the information and warning labels on the vehicle.
Protective clothing
Warning
Risk of injury Missing or poor protective clothing presents an increased safety risk.
- Wear appropriate protective clothing such as helmets, boots, gloves as well as trousers, and a jacket with protectors on all rides.
- Always wear protective clothing that is in good condition and meets the legal regulations.
- In the interest of your own safety, KTM recommends that you only operate the vehicle while wearing protective clothing.
Work rules
Unless specified otherwise, the ignition must be turned off during all work (models with the ignition lock, models with remote key) or the engine must be at a standstill (models without ignition lock or remote key). Special tools are necessary for certain tasks. The tools are not a component of the vehicle but can be ordered using the number in parentheses. Example: bearing puller (15112017000) During assembly, use new parts to replace parts that cannot be reused (e.g. self-locking screws and nuts, expansion screws, seals, sealing rings, O-rings, pins, and lock washers). In the case of certain screws, a screw adhesive (e.g. Loctite®) is required. Observe the manufacturer’s instructions. If a thread locker (e.g., Precote®) has already been applied to a new part, do not apply any additional thread locker. After disassembly, clean the parts that are to be reused and check them for damage and wear. Change damaged or worn parts. After completing a repair or service work, check the operating safety of the vehicle.
Environment
If you use your motorcycle responsibly, you can ensure that problems and conflicts do not occur. To protect the future of the motorcycle sport, make sure that you use your motorcycle legally, display environmental consciousness, and respect the rights of others. When disposing of used oil, other operating and auxiliary fluids, and used components, comply with the laws and regulations of the respective country. Because motorcycles are not subject to the EU regulations governing the disposal of used vehicles, there are no legal regulations that pertain to the disposal of an end-of-life motorcycle. Your authorized KTM dealer will be glad to advise you.
Danger
Fire hazard Fuel is highly flammable. The fuel in the fuel tank expands when warm and can escape if overfilled.
- Do not fuel the vehicle in the vicinity of open flames or lit cigarettes.
- Switch off the engine for refueling.
- Make sure that no fuel is spilled; particularly not on hot parts of the vehicle.
- If any fuel is spilled, wipe it off immediately.
- Observe the specifications for refueling.
Warning
The danger of poisoning Fuel is poisonous and a health hazard.
- Avoid skin, eye, and clothing contact with fuel.
- Immediately consult a doctor if you swallow fuel.
- Do not inhale fuel vapors.
- In case of skin contact, rinse the affected area with plenty of water.
- Rinse the eyes thoroughly with water, and consult a doctor in case of fuel contact with the eyes.
- Change your clothing in case of fuel spills on them.
- Keep fuels correctly in a suitable canister, and out of the reach of children.
FAQ
A1: The KTM 350 EXC-F Six Days 2020 is a model of off-road motorcycle designed for enduro and trail riding. It’s part of KTM’s EXC-F lineup and is specially designed for the annual International Six Days Enduro (ISDE) competition.
A2: The bike is equipped with a 349.7cc single-cylinder, 4-stroke engine.
A: The price typically starts around $11,199 USD.
A: The Six Days edition features special graphics, upgraded components, and is often released to commemorate KTM’s participation in the International Six Days Enduro (ISDE) event.
A: It comes with a 6-speed wide-ratio transmission.
A: The approximate weight is around 245 lbs (111 kg) without fuel.
A: It has a fuel tank capacity of approximately 2.25 gallons (8.5 liters).
A: Yes, it features electric start for easy ignition.
A: The KTM 350 EXC-F Six Days 2020 is equipped with WP XPLOR front and rear suspension.
A: It comes with a stock exhaust system designed for optimal performance.
A: The Six Days edition is typically priced slightly higher than the standard version, with a price difference of around $300 to $500 USD.
A: Yes, the KTM 350 EXC-F Six Days 2020 is street-legal in many regions, allowing for both off-road and on-road riding.
A: It produces around 45 horsepower.
A: Yes, it comes with a digital display that provides information on speed, RPM, fuel level, and more.
A: Yes, it meets Euro 4 emission standards and is compliant with various emissions regulations.