Lexus ES350 2022 Garage Door Opener User Manual

Introduction

Thanks to the garage door opener in the Lexus ES350 2022, welcome to the world of convenience and simple entry. This innovative feature elevates your driving experience by combining cutting-edge technology with painstaking craftsmanship.

In conclusion, the Lexus ES350 2022’s garage door opener seamlessly combines convenience and innovation. With the touch of a button, effortlessly manage your garage door and enjoy the height of luxury and functionality. Enter a world where technology smoothly combines with daily living, enhancing and simplifying every journey.

Garage Door Opener

The garage door opener can be programmed using HomeLink® to operate garage doors, gates, entry doors, door locks, home lighting systems, security systems, and other devices.

HomeLink® programming procedure
The programming procedures can also be found at the following URL.
Website: www.homelink.com/lexus

For support, contact customer support at the following.
Help Line: 1-800-355-3515

System components
The HomeLink® wireless control system in your vehicle has 3 buttons that can be programmed to operate 3 different devices. Refer to the programming methods on the following pages to determine the method which is appropriate for the device.

1. HomeLink® indicator light
2. Garage door operation indicators
3. HomeLink® icon
   Illuminates while HomeLink® is operating.
4. Buttons

Codes stored in the HomeLink® memory

1. The registered codes are not erased even if the battery cable is disconnected.
2. If learning failed when registering a different code to a HomeLink® button that already has a code registered to it, the already registered code will not be erased.

WARNING
When programming a garage door or other remote control device
The garage door or other device may operate, so ensure people and objects are out of danger to prevent potential harm.

WARNING
Conforming to federal safety standards
Do not use the HomeLink® compatible transceiver with any garage door opener or device that lacks safety stop and reverse features as required by federal safety standards.
This includes any garage door that can-not detect an interfering object. A door or device without these features increases the risk of death or serious injury.

When operating or programming HomeLink®
Never allow a child to operate or play with the HomeLink® buttons.

Programming the HomeLink

Before programming HomeLink®

1. During programming, it is possible that garage doors, gates, or other devices may operate. For this reason, make sure that people and objects are clear of the garage door or other devices to prevent injury or other potential harm.
2. It is recommended that a new battery be placed in the remote control transmitter for more accurate programming.
3. Garage door opener motors manufactured after 1995 may be equipped with rolling code protection. If this is the case, you may need a stepladder or other sturdy, safe device to reach the “Learn” or
   “Smart” button on the garage door opener motor.

Programming HomeLink
Steps 1 through 3 must be performed within 60 seconds, otherwise, the indicator light will stop flashing and programming will not be able to be completed.

1. Press and release the HomeLink® button you want to program and check that the HomeLink® indicator light flashes (orange).
2. Point the remote control transmitter for the device at the rearview mirror, 1 to 3 in. (25 to 75 mm) from the HomeLink® buttons.
   Keep the HomeLink® indicator light in view while programming.
3. Program a device.
   1. Programming a device other than an entry gate (for U.S.A. owners)
      Press and hold the remote control transmitter button until the HomeLink® indicator light changes from slowly flashing orange to rapidly flashing green (rolling code) or continuously lit green (fixed code), then release the button.
   2. Programming an entry gate (for U.S.A. owners)/Programming a device in the Canadian market
      Press and release the remote control transmitter button at 2-second intervals, repeatedly, until the HomeLink® indicator light changes from slowly flashing (orange) to rapidly flashing (green) (rolling code) or continuously lit (green) (fixed code).
4. Test the HomeLink® operation by pressing the newly programmed button and observing the indicator light:
   1. Indicator light illuminates: Program-ming of a fixed code device has been completed. The garage door or other device should operate when a HomeLink® button is pressed and released.
   2. The indicator light flashes rapidly: The garage door opener motor or other device is equipped with a rolling code. To complete programming, firmly press and hold the HomeLink® button for 2 seconds then release it.
   3. If the garage door or other device does not operate, proceed to “Programming a rolling code system”.
5. 5 Repeat the steps above to program another device for any of the remaining HomeLink® buttons.

Programming a rolling code system
2 or more people may be necessary to complete rolling code programming.

1. Locate the “Learn” or “Smart” button on the garage door opener motor in the garage.
   This button can usually be found where the hanging antenna wire is attached to the unit. The name and color of the button may vary by manufacturer. Refer to the owner’s manual supplied with the garage door opener motor for details.
2. Press and release the “Learn” or “Smart” button.
   Perform 3 within 30 seconds after performing 2.
3. Press and hold the desired
   HomeLink® button (inside the vehicle) for 2 seconds and release it. Repeat this sequence (press/hold/release) up to 3 times to complete programming.
   If the garage door opener motor operates when the HomeLink® button is pressed, the garage door opener motor recognizes the HomeLink® signal.

Enabling 2-way communication with a garage door (only available for compatible devices)
When enabled, 2-way communication allows you to check the status of the opening and closing of a garage door through indicators in your vehicle.
2-way communication is only available if the garage door opener motor used is a compatible device. (To check device compatibility, refer to www.homelink.com.)

1. Within 5 seconds after programming the garage door opener has been completed, if the garage door opener motor is trained to HomeLink®, both garage door operation indicators will flash rap-idly (green) and the light on the garage door opener motor will blink twice, indicating that 2-way communication is enabled.
   If the indicators do not flash, perform 2 and 3 within the first 10 presses of the HomeLink® button after programming has been completed.
2. Press a programmed HomeLink® button to operate a garage door.
3. Within 1 minute of pressing the HomeLink® button, after the garage door operation has stopped, press the “Learn” or
   “Smart” button on the garage door opener motor. Within 5 seconds of the establishment of 2-way communication with the garage door opener, both garage door operation indicators in the vehicle will flash rapidly (green) and the light on the garage door opener motor will blink twice, indicating that 2-way communication is enabled.

Reprogramming a single HomeLink® button
When the following procedure is performed, buttons that already have devices registered to them can be overwritten:

1. With one hand, press and hold the desired HomeLink® button.
2. When the HomeLink® indicator starts flashing (orange), continue to hold the HomeLink® button and perform “Programming HomeLink®” 1 (it takes 20 seconds for the HomeLink® indicator to start flashing).

Before programming

1. Install a new battery in the transmitter.
2. The battery side of the transmitter must be pointed away from the HomeLink®.

Operating HomeLink®
Press the appropriate HomeLink® button. The HomeLink® indicator light should turn on.
The status of the opening and closing of a garage door is shown by the indicators.

Opening
Closing

This function is only available if the garage door opener motor used is a compatible device. (To check device compatibility, refer to www.homelink.com.)

The indicators can operate within approximately 820 ft. (250 m) of the garage door. However, if there are obstructions between the garage door and the vehicle, such as houses and trees, feedback signals from the garage door may not be received. To recall the previous door operation status, press, and release either HomeLink® buttons and or and simultaneously. The last recorded status will be displayed for 3 seconds.

Erasing the entire HomeLink® memory (all three codes)
Press and hold the 2 outside buttons for 10 seconds until the HomeLink® indicator light changes from continuously lit (orange) to rapidly flashing (green). If you sell your vehicle, be sure to erase the programs stored in the HomeLink® memory.

FAQs

1. How do I program the garage door opener in my Lexus ES350 2022?
   Follow these instructions to set up the garage door opener in your Lexus ES350 2022:
   1. Place your car close to the garage door opener.
   2. Find the buttons for the above console’s garage door opener.
   3. The desired button should be pressed and held until the indicator light starts to flash.
   4. Press the “Learn” button on your garage door opener motor while the light is blinking.
   5. When the indicator light on the overhead console stops blinking, release both presses.
2. How many garage door opener buttons are available in the Lexus ES350 2022?
   The overhead console of the Lexus ES350 2022 features three programmable garage door opener buttons.
   
3. Can I program multiple garage door openers in my Lexus ES350 2022?
   In your Lexus ES350 2022, you can set up numerous garage door openers. It is possible to set up the three buttons to control various garage door openers.
4. How can I erase the programmed garage door opener codes in my Lexus ES350 2022?
   Use the following procedures to remove the preprogrammed garage door opener codes from your Lexus ES350 2022:
   1. On the overhead console, press and hold the chosen garage door opener button.
   2. The indicator light will start to flash quickly after 20 seconds.
   3. Hold the button down until the light turns on and then off.
   4. When the light turns back on, let go of the button.
5. What is the range of the garage door opener in the Lexus ES350 2022?
   The Lexus ES350 2022 garage door opener’s range may vary according on the surrounding surroundings, however it normally has a range of up to 100 feet.
6. Can I program a rolling code garage door opener in my Lexus ES350 2022?
   The Lexus ES350 2022’s garage door opener may be set up to function with rolling code openers. The same programming procedures as for a typical garage door opener should be used.
7. How do I know if the garage door opener programming was successful in my Lexus ES350 2022?
   Once your Lexus ES350 2022’s garage door opener has been programmed, test it by hitting the programmed button. The programming was successful if the garage door opens or closes.
8. Can I program the garage door opener in my Lexus ES350 2022 without the remote control for the garage door opener?
   No, you must program the garage door opener using the remote control that came with your Lexus ES350 2022. The garage door opener and the vehicle’s opener are coordinated via the remote control.
9. How do I replace the battery in the garage door opener remote for my Lexus ES350 2022?
   The steps below should be followed to change the battery in your Lexus ES350 2022’s garage door opener remote:
   1. To remove the remote control’s cover, use a little screwdriver.
   2. Make sure the polarity is right before removing the old battery and installing the new one.
   3. Reattach the remote control’s cover using a snap.
10. Can I operate my garage door opener while the vehicle ignition is off in my Lexus ES350 2022?
    Yes, even with the ignition off, you may use the garage door opener on your Lexus ES350 2022. The overhead console’s opening buttons can be operated regardless of whether the ignition is on or off.
11. Does the garage door opener in the Lexus ES350 2022 have a security feature?
    Yes, the Lexus ES350 2022’s garage door opener features a security function that use rolling codes. This function aids in guarding against unwanted access to your garage.
12. Can I program the garage door opener to open different types of doors, such as gates or commercial garage doors?
    The Lexus ES350 2022’s garage door opener is primarily made for residential garage doors. While some commercial garage doors or gates may be compatible, it is advised to check the opener’s handbook or get in touch with the maker for compatibility details.
13. Can I program the garage door opener in my Lexus ES350 2022 while driving?
    No, it is not secure to program your Lexus ES350 2022’s garage door opener while operating the vehicle. Always make sure your parking spot is secure and drive as directed by the programming.
14. What should I do if the garage door opener in my Lexus ES350 2022 is not working properly?
    You can attempt the following troubleshooting techniques if the garage door opener in your Lexus ES350 2022 isn’t functioning properly:
    1. Make sure the remote control’s batteries are brand new and put correctly.
    2. To make sure the opener is properly synchronized with the garage door opener, check the programming.
    3. Test the garage door opener with the original remote to ensure that it is operating properly.
    4. If the problem continues, refer to the owner’s manual or get in touch with a Lexus dealership for more help.
15. Can I program the garage door opener in my Lexus ES350 2022 to work with a home automation system?
    The Lexus ES350 2022’s garage door opener isn’t made to work with home automation systems in particular. To manage your garage door remotely, several home automation systems may offer compatibility or extra accessories. For further information, get in touch with the company that made your home automation system.

Useful Links

View Full User Guide: Lexus ES350 2022 User Manual | Auto User Guide
Download Manuals: Resources | Manuals & Guides | My Lexus