Lexus ES350 2022 Multi-Information Display User Manual

Introduction

The Lexus ES350 2022 has a multi-information display (MID), which serves as the vehicle’s main information hub and gives drivers access to a wealth of significant and customizable data. The MID, which can be found inside the instrument cluster or on the dashboard, provides an easy way to access various vehicle data and settings, improving the driving experience. The multi-information display on the Lexus ES350 2022 typically has a vivid and easy-to-read screen, allowing drivers to quickly view important information. This includes specifics like the speed of the car, its fuel efficiency, the itinerary, the settings for the audio system, the navigational instructions, and much more.

The MID in the ES350 is typically operated by buttons or switches that are easily accessible to the driver, usually on the steering wheel. This makes it safe and simple to access and navigate through the various options and settings, allowing the driver to maintain their focus on the road. The multi-information display may contain significant safety features in addition to information about the performance and condition of the vehicle. These can be anything from providing real-time tyre pressure information and maintenance reminders to displaying alerts and warnings for systems like lane departure warning, forward collision warning, and blind-spot monitoring.

Multi-Information Display

Display and Menu Icons
Display (except F SPORT models)
By selecting menu icons on the multi-information display, a variety of driving-related information can be displayed. The multi-information display can also be used to change display settings and other vehicle settings. Warning or suggestion/advice pop-up displays are also displayed in certain situations.

Display (F SPORT models)
The multi-information display presents the driver with a variety of driving-related information.
Warning or suggestion/advice pop-up displays are also displayed in certain situations.

The main meter moved to the right
By selecting menu icons on the multi-information display, a variety of driving-related information can be displayed. The multi-information display can also be used to change display settings and other vehicle settings. Warning or suggestion/advice pop-up displays are also displayed in certain situations.

Menu icons
The menu icons will be displayed by pressing or of the meter control switches.
F SPORT models: The menu icons can be displayed when the main meter is moved to the right.

Driving information display
Navigation system-linked display (if equipped)
Audio system-linked display
Driving support system information display
Warning message display
Settings display

Liquid Crystal Display
Small spots or light spots may appear on the display. This phenomenon is characteristic of liquid crystal displays, and there is no problem continuing to use the display.

WARNING
Caution for use while Driving

1. When operating the multi-information display while driving, pay extra attention to the safety of the area around the vehicle.
2. Do not look continuously at the multi-information display while driving as you may fail to see pedestrians, objects on the road, etc. ahead of the vehicle.
3. The information displayed at low temperatures

Changing the Meter Display

The multi-information display is operated using the meter control switches.

1.  : Select menu icons
    : Change displayed content, scroll up/down the screen and move the cursor up/down
2. Press: Enter/Set
3. Press and hold: Reset
4. Move the main meter* and return to the previous screen
5. Call sending/receiving and history display Linked with the hands-free system, sending or receiving calls is displayed. For details regarding the hands-free system, refer to the “MULTIMEDIA OWNER’S MANUAL”.
6. F SPORT models

Content of driving information

Display items (except F SPORT models)
Press or of the meter control switches and select.

Then press or display the following items:

1. Drive information 1
2. Drive information 2
3. Eco Driving Indicator
4. Tire pressure
5. Display off

Display items (F SPORT models)
Main meter in the center position

Press or of the meter control switches to display the following items:

1. Drive information 1
2. Drive information 2
3. Gear position
4. Tire pressure
5. Units
6. Display off

The main meter moved to the right
Press or of the meter control switches and select. Then press or to display the following items:

1. Drive information 1
2. Drive information 2
3. Eco Driving Indicator
4. G-force
5. Gear Position
6. Tire pressure
7. Display off

Drive information 1/Drive information 2
Displays drive information such as the following:
Use the displayed values as a reference only.

1. Drive information 1
   1. Current fuel consumption
   2. Average fuel economy (after reset)
2. Drive information 2
   1. Distance (driving range)
   2. Average vehicle speed (after reset)
      Displayed items (listed below) can be changed on.
3. Current fuel consumption
   Bar type: Displays instantaneous current fuel consumption
4. Average fuel economy
   After reset: Displays average fuel consumption since the display was reset*1
   After start: Displays average fuel consumption since engine start
   After refuel: Displays average fuel consumption since refuel
5. Average vehicle speed
   After reset: Displays average vehicle speed since the display was reset*1
   After start: Displays average vehicle speed since engine start
6. Elapsed time
   After reset: Displays elapsed time since the display was reset*1
   After start: Displays elapsed time since engine start
7. Distance
   Driving range: Displays driving range with remaining fuel*2, 3
   After starting: Displays the distance driven since engine start
8. Other
   Blank: No item
   1. To reset, display the desired item and press and hold “OK” on the meter control switches.
   2. This distance is computed based on your average fuel consumption. As a result, the actual distance that can be driven may differ from that displayed.
   3. When only a small amount of fuel is added to the tank, the display may not be updated.

When refueling, turn the engine switch off. If the vehicle is refueled without turning the engine switch off, the display may not be updated.

Eco Driving Indicator

1. Eco Driving Indicator Light
   During Eco-friendly acceleration (Eco driving), the Eco Driving Indicator Light will turn on. When the acceleration exceeds the Zone of Eco driving, or when the vehicle is stopped, the light turns off.
2. Eco Driving Indicator Zone Display
   Suggests the Zone of Eco driving with cur-rent Eco driving ratio based on acceleration.
3. Eco driving ratio based on acceleration
   If the acceleration exceeds the Zone of Eco driving, the right side of the Eco Driving Indicator Zone Display will illuminate.
   At this time, the Eco Driving Indicator Light will turn off.
4. Zone of Eco driving
   1. Boost gauge
      Displays the boost pressure. The dis-play will change color if the specified pressure is exceeded.
      This display is intended for use as a guide-line. Depending on factors such as the road surface condition, temperature and vehicle speed, the display may not show the actual condition of the vehicle.
   2. G-force (F SPORT models)
      Displays lateral G-forces on the vehicle.

1. Acceleration G-force on the vehicle
2. Current G-force value (analyzed value of front/rear and left/right G-forces)
3. Record of the maximum G-forces

This display is intended for use as a guideline. Depending on factors such as the road surface condition, temperature, and vehicle speed, the display may not show the actual condition of the vehicle.

Resetting the record of maximum G- forces
Press and hold “OK” of the meter control switches to reset the record.

Peak hold function
If lateral G-forces of 0.5 G or greater are generated, the G-force value display will turn amber and be held for 2 seconds.

Gear Position (F SPORT models)
Displays the current shift range or gear position when the shift lever is in D or S.

Units (F SPORT models)
The units of measure used can be changed while driving.
Unlike the unit setting performed on the settings display, the unit set performed on the drive information display can be changed while driving.

Eco Driving Indicator
Eco Driving Indicator will not operate under the following conditions:

1. The shift lever is in any position other than D.
2. A paddle shift switch is operated.
3. The driving mode is set to other than normal mode or Eco drive mode.
4. The vehicle speed is approximately 80 mph (130 km/h) or higher.

Navigation System-Linked Display

Select to display the following navigation system-linked information.

1. Route guidance to the destination
2. Compass display (heading-up display)

Audio system-linked display
Select to enable the selection of an audio source or track on the meter using the meter control switches.

Driving support system information display
Select to display the operational status of the following systems:

1. LTA (Lane Tracing Assist)
2. Dynamic radar cruise control with full-speed range
3. RSA (Road Sign Assist) (if equipped)

Settings display
Meter display settings that can be changed

1. Language
   Select to change the language displayed.
2. Units
   Select to change the units of measure displayed.
3. Speedometer display (except F SPORT models)
   Select to set the display of the speedometer to digital or analog.
4. Drive information 1/Drive information 2
   Select to select up to 2 items that will be displayed on each Drive information screen (Drive information 1 screen and Drive information 2 screen) respectively.
5. Clock Select to switch between 12-hour display and 24-hour display.
6. Pop-up display
   Select to enable/disable some pop-up dis-plays for each relevant system.
7. Rev indicator (F SPORT models)
   1. Select to enable/disable the rev indicator.
   2. Select to set the engine speed at which the rev indicator (amber) will begin to be displayed.
8. Rev peak (F SPORT models)
   Select to enable/disable the rev peak.
9. Eco Driving Indicator Light
   Select to enable/disable the Eco Driving Indicator Light.
10. Default setting
    Select to reset the meter display settings to the default setting.

Vehicle functions and settings that can be changed

Suspension of the settings display

1. Some settings cannot be changed while driving. When changing settings, park the vehicle in a safe place.
2. If a warning message is displayed, the operation of the settings display will be suspended.

WARNING
Cautions during setting up the display
As the engine needs to be running during setting up the display, ensure that the vehicle is parked in a place with adequate ventilation. In a closed area such as a garage, exhaust gases including harmful carbon monoxide (CO) may collect and enter the vehicle. This may lead to death or a serious health hazard.

NOTICE
During setting up the display
To prevent battery discharge, ensure that the engine is running while setting up the display features.

Suggestion Function
Displays suggestions to the driver in the following situations. To select a response to a displayed suggestion, use the meter control switches.

Suggestion to turn on the head-lights
If the headlights turn off, and the vehicle speed is 3 mph (5 km/h) or higher for a certain amount of time when the surroundings are dark, a suggestion message will be displayed.

Suggestion to turn off the head-lights
If the headlights are left on for a certain amount of time with the headlight switch in after the engine switch has been turned off, a suggestion message will be displayed asking if you wish to turn the headlights off.
To turn the headlights off, select “Yes”. If a front door is opened after the engine switch is turned off, this suggestion message will not be displayed.

Customization
Some functions can be customized.

FAQs

1. What is the purpose of the multi-information display in the Lexus ES350 2022?
   The multi-information display acts as a central hub to give drivers access to various features, customizable settings, and important vehicle information.
2. Where is the multi-information display located in the ES350?
   The multi-information display is typically mounted on the dashboard or in the instrument cluster, directly in front of the driver.
3. What type of information can I see on the multi-information display?
   The MID can show a variety of data, such as the vehicle’s speed, fuel efficiency, trip details, audio system settings, and navigational instructions.
4. Can I customize the information displayed on the multi-information display?
   The MID on the ES350 is typically customizable, allowing drivers to pick and choose which data they want to prioritise appearing on the display.
5. How do I navigate through the options and settings on the multi-information display?
   Alerts and warnings for safety systems like lane departure warning, forward collision warning, blind-spot monitoring, and more may be shown on the MID.
6. Can I see safety-related information on the multi-information display?
   To navigate through options and settings, the MID is typically operated by buttons or switches on the steering wheel or within the driver’s easy reach.
7. Can I view real-time tire pressure information on the multi-information display?
   You can keep track of the tyre pressures in each of your four tyres if the MID offers real-time tyre pressure readings.
8. Does the multi-information display show maintenance reminders?
   The MID may show maintenance reminders, alerting you when scheduled maintenance is due or when particular components require attention.
9. Can I see information about my audio system on the multi-information display?
   The MID can frequently show details about the audio system, such as the track information, current audio source, and audio settings.
10. Can I see navigation instructions on the multi-information display?
    To navigate through options and settings, the MID is typically operated by buttons or switches on the steering wheel or within the driver’s easy reach.
11. Does a night mode or adjustable brightness?
    Many ES350 models do have brightness settings that can be changed or a night mode feature that makes it possible to comfortably view in various lighting situations.
12. Can I reset trip information displayed on the multi-information display?
    You can start over for each new trip or journey because the MID typically has a function to reset trip information.
13. Is the multi-information display visible in all lighting conditions?
    The MID is made to be readable in a variety of lighting situations, including bright daylight and low light.
14. Can I access vehicle settings through the multi-information display?
    You can modify features like door locking preferences, lighting options, and more by accessing various vehicle settings through the MID.
15. Are there any additional features or capabilities of the multi-information display?
    Additional features of the MID may include warnings for low fuel, seatbelt reminders, or system diagnostics, depending on the model and options selected.

Useful Links

View Full User Guide: Lexus ES350 2022 User Manual | Auto User Guide
Download Manuals: Resources | Manuals & Guides | My Lexus