Lexus ES350 2023 Gauges and Meters User Manual
Introduction
Welcome to our in-depth guide to the Lexus ES350 2023’s metre and gauges! The instrument cluster of your car must include gauges and meter because they give you important information about the performance and condition of your car on a variety of fronts. The layout and features of the specific gauges and meter in the Lexus ES350 2023 may differ slightly from those described in this guide, which only offers a general overview. To get the most precise and recent information about gauges and meter, always refer to your car’s manual. So let’s explore the world of meter and gauges in the Lexus ES350 2023 and arm ourselves with the knowledge to accurately track our car’s performance and guarantee a comfortable and enjoyable ride.
Gauges and Meters
(Except F SPORT Models)
Meter Display
Locations of gauges and meters
The units of measure may differ depending on the intended destination of the vehicle.
- Multi-information display
Presents the driver with a variety of vehicle data
Displays warning messages if a malfunction occurs - Outside temperature
Displays the outside temperature within the range of -40°F (-40°C) to 122°F (50°C) Low outside temperature indicator comes on when the ambient temperature is 37°F (3°C) or lower - Tachometer
Displays the engine speed in revolutions per minute
When sport mode is selected for the driving mode, the periphery of the tachometer will change color and the scale of the tachometer will be emphasized. - Speedometer
- Clock
The time displayed is linked to the analog clock on the center panel. - Engine Coolant Temperature Gauge
Displays the engine coolant temperature - Fuel gauge
Displays the quantity of fuel remaining in the tank
In the following situations, the actual quantity of fuel remaining in the tank may not be displayed correctly. Refer to P.69 if the actual quantity of fuel remaining in the tank is not displayed correctly.- A small amount of fuel is added.
- Fuel is added with the fuel gauge near or at “F”.
- The vehicle is stopped on an uneven surface, such as a slope.
- The vehicle is driven on a slope or around a curve.
- Shift position and shift range
- Odometer and trip meter display
Manually Updating the Fuel Gauge and Possible Driving Range
The fuel gauge and the possible driving range are linked. If the displays of the fuel gauge and possible driving range do not update after adding a small amount of fuel, the displays can be updated by performing the following procedure.
- Stop the vehicle on a level surface.
- Press the “ODO TRIP” switch to change the odometer and trip meter display to the odometer.
- Turn the engine switch off.
- While pressing and holding the “ODO TRIP” switch, turn the engine switch to IGNITION ON mode.
- Continue to hold the “ODO TRIP” switch for approximately 5 seconds, and then release it once the odometer begins flashing.
Updating is complete once the odometer flashes for approximately 5 seconds and then the display returns to normal.
Outside Temperature Display
- In the following situations, the correct outside temperature may not be displayed, or the display may take longer than normal to change:
- When stopped, or driving at low speeds (less than 12 mph [20 km/h])
- When the outside temperature has changed suddenly (at the entrance/exit of a garage, tunnel, etc.)
- When “–” or “E” is displayed, the system may be malfunctioning. Take your vehicle to your Lexus dealer.
- Liquid crystal display
- Customization
The gauges and meters can be customized on
the multi-information display.
WARNING
The information displayed at low temperatures
Allow the interior of the vehicle to warm up before using the liquid crystal information display. At extremely low temperatures, the information display monitor may respond slowly, and display changes may be delayed. For example, there is a lag between the driver’s shifting and the new gear number appearing on the display. This lag could cause the driver to downshift again, causing rapid and excessive engine braking and possibly an accident resulting in death or injury.
NOTICE
To prevent damage to the engine and its components
- Do not let the indicator needle of the tachometer enter the red zone, which indicates the maximum engine speed.
- The engine may be overheating if the engine coolant temperature gauge is in the red zone (H). In this case, immediately stop the vehicle in a safe place, and check the engine after it has cooled completely.
Odometer and Trip Meter Display
Display Items
- Odometer
Displays the total distance the vehicle has been driven. - Trip meter A/trip meter B
Displays the distance the vehicle has been driven since the meter was last reset. Trip meters A and B can be used to record and display different distances independently. - The distance until the next engine oil change
Displays the distance the vehicle can be driven until an oil change is necessary.
Changing the Display
Each time the “ODO TRIP” switch is pressed, the displayed item will be changed. When the trip meter is displayed, pressing and holding the switch will reset the trip meter.
Pop-up Display
The distance until the next engine oil change will be displayed when a warning message indicating that oil maintenance should be performed soon or is required is displayed.
Changing the Instrument Panel Light Brightness
The brightness of the instrument panel lights can be adjusted.
- Darker
- Brighter
The Brightness of the Meter Lights (Day Mode and Night Mode)
The brightness of the meter lights can be adjusted individually.
In the following situations, the meters change between day mode and night mode.
- Day Mode: When the tail lights are off or when the tail lights are on but the surrounding area is bright
- Night Mode: When the tail lights are on and the surrounding area is dark
Locations of Gauges and Meters
When the main meter is moved to the right, some of the meter displays, and the gauge layout will change.
Main Meter in the Center Position
The units of measure may differ depending on the intended destination of the vehicle.
- Odometer and trip meter display
- The engine coolant temperature gauge Displays the engine coolant temperature
- Outside temperature
Displays the outside temperature within the range of -40°F (-40°C) to 122°F (50°C) Low outside temperature indicator comes on when the ambient temperature is 37°F (3°C) or lower - Tachometer
Displays the engine speed in revolutions per minute
When sport mode is selected for the driving mode, the periphery of the tachometer will change color and the scale of the tachometer will be emphasized.- Rev indicator
- Rev peak
- Speedometer
- Shift position/shift range/gear position
- Clock
The time displayed is linked to the analog clock on the center panel. - Fuel gauge
Displays the quantity of fuel remaining in the tank
In the following situations, the actual quantity of fuel remaining in the tank may not be displayed correctly. Refer to if the actual quantity of fuel remaining in the tank is not displayed correctly.- A small amount of fuel is added.
- Fuel is added with the fuel gauge near or at “F”.
- The vehicle is stopped on an uneven surface, such as a slope.
- The vehicle is driven on a slope or around a curve.
- Multi-information display
Presents the driver with a variety of vehicle data
Displays warning messages if a malfunction occurs
The Main Meter Moved to the Right
The units of measure may differ depending on the intended destination of the vehicle.
- Outside temperature
Displays the outside temperature within the range of -40°F (-40°C) to 122°F (50°C) Low outside temperature indicator comes on when the ambient temperature is 37°F (3°C) or lower - Clock
The time displayed is linked to the analog clock on the center panel. Tachometer
Displays the engine speed in revolutions per minute
When sport mode is selected for the driving mode, the periphery of the tachometer will change color and the scale of the tachometer will be emphasized.- Rev indicator
- Rev peak
- Speedometer
- Shift position and shift range
- Odometer and trip meter display
- Fuel gauge
Displays the quantity of fuel remaining in the tank
In the following situations, the actual quantity of fuel remaining in the tank may not be displayed correctly. Refer to P.74 if the actual quantity of fuel remaining in the tank is not displayed correctly.- A small amount of fuel is added.
- Fuel is added with the fuel gauge near or at “F”.
- The vehicle is stopped on an uneven surface, such as a slope.
- The vehicle is driven on a slope or around a curve.
- Engine coolant temperature gauge
Displays the engine coolant temperature - Multi-information display
Presents the driver with a variety of vehicle data Displays warning messages if a malfunction occurs
Rev Indicator
When the engine speed reaches a set speed or the red zone, a ring-shaped indicator ( A ) will be displayed on the tachometer.
The indicators will be displayed in amber when the engine speed reaches a set speed, and in red when the engine speed reaches the red zone.
The engine speed at which the rev indicator will begin to be displayed can be set on the multi-information display. 
Rev Peak
When the engine speed reaches or exceeds 5000 rpm, an afterimage of the tachometer will be displayed at the highest engine speed for approximately 1 second.
Manually Updating the Fuel Gauge and Possible Driving Range
The fuel gauge and the possible driving range are linked. If the displays of the fuel gauge and possible driving range do not update after adding a small amount of fuel, the displays can be updated by performing the following procedure.
- Stop the vehicle on a level surface.
- Press the “ODO TRIP” switch to change the odometer and trip meter display to the odometer.
- Turn the engine switch off.
- While pressing and holding the “ODO TRIP” switch, turn the engine switch to IGNITION ON mode.
- Continue to hold the “ODO TRIP” switch for approximately 5 seconds, and then release it once the odometer begins flashing.
Updating is complete once the odometer flashes for approximately 5 seconds and then the display returns to normal.
Outside Temperature Display
- In the following situations, the correct outside temperature may not be displayed, or the display may take longer than normal to change:
- When stopped, or driving at low speeds (less than 12 mph [20 km/h])
- When the outside temperature has changed suddenly (at the entrance/exit of a garage, tunnel, etc.)
- When “–” or “E” is displayed, the system may be malfunctioning. Take your vehicle to your Lexus dealer.
Liquid crystal display
Customization
The gauges and meters can be customized on of the multi-information display
WARNING
The information displayed at low temperatures
Allow the interior of the vehicle to warm up before using the liquid crystal information display. At extremely low temperatures, the information display monitor may respond slowly, and display changes may be delayed. For example, there is a lag between the driver’s shifting and the new gear number appearing on the display. This lag could cause the driver to downshift again, causing rapid and excessive engine braking and possibly an accident resulting in death or injury.
NOTICE
To prevent damage to the engine and its components
- Do not let the indicator needle of the tachometer enter the red zone, which indicates the maximum engine speed.
- The engine may be overheating if the engine coolant temperature gauge is in the red zone (H). In this case, immediately stop the vehicle in a safe place, and check the engine after it has cooled completely.
Odometer and Trip Meter Display
Display items
- Odometer
Displays the total distance the vehicle has been driven. - Trip meter A/trip meter B
Displays the distance the vehicle has been driven since the meter was last reset. Trip meters A and B can be used to record and display different distances independently. - The distance until the next engine oil change
Displays the distance the vehicle can be driven until an oil change is necessary.
Changing the display
Each time the “ODO TRIP” switch is pressed, the displayed item will be changed. When the trip meter is displayed, pressing and holding the switch will reset the trip meter.
Pop-up display
The distance until the next engine oil change will be displayed when a warning message indicating that oil maintenance should be performed soon or is required is displayed.
Changing the instrument panel light brightness
The brightness of the instrument panel lights can be adjusted.
- Darker
- Brighter
The brightness of the meter lights (day mode and night mode)
The brightness of the meter lights can be adjusted individually.
In the following situations, the meters change between day mode and night mode.
- Day mode: When the tail lights are off or when the tail lights are on but the surrounding area is bright
- Night mode: When the tail lights are on and the surrounding area is dark
Changing the Main Meter Location
The display can be switched between the center and side positions.
Multi-Information Display
Display and menu icons
Display (except F SPORT models)
By selecting menu icons on the multi-information display, a variety of driving-related information can be displayed. The multi-information display can also be used to change display set-tings and other vehicle settings. Warning or suggestion/advice pop-up displays are also displayed in certain situations.
Display (F SPORT models)
The multi-information display presents the driver with a variety of driving-related information.
Warning or suggestion/advice pop-up displays are also displayed in certain situations.
The main meter moved to the right
By selecting menu icons on the multi-information display, a variety of driving-related information can be displayed. The multi-information display can also be used to change display settings and other vehicle settings. Warning or suggestion/advice pop-up displays are also displayed in certain situations.
Menu icons
The menu icons will be displayed by pressing
or 
of the meter control switches.
F SPORT models: The menu icons can be displayed when the main meter is moved to the right.
Driving information display
Navigation system-linked display (if equipped)
Audio system-linked display
Driving support system information display
Warning message display
Settings display
Liquid crystal display
Small spots or light spots may appear on the display. This phenomenon is characteristic of liquid crystal displays, and there is no problem continuing to use the display.
WARNING
Caution for use while driving
- When operating the multi-information display while driving, pay extra attention to the safety of the area around the vehicle.
- Do not look continuously at the multi-information display while driving as you may fail to see pedestrians, objects on the road, etc. ahead of the vehicle.
- The information displayed at low temperatures
Changing the Meter Display
The multi-information display is operated using the meter control switches.
: Select menu icons
: Change displayed content, scroll up/down the screen and move the cursor up/down- Press: Enter/Set
- Press and hold: Reset
- Move the main meter* and return to the previous screen
- Call sending/receiving and history display Linked with the hands-free system, sending or receiving calls is displayed. For details regarding the hands-free system, refer to the “MULTIMEDIA OWNER’S MANUAL”.
- F SPORT models
Content of driving information
Display items (except F SPORT models)
Press or of the meter control switches and select
.
Then press 
or 
display the following items:
- Drive information 1
- Drive information 2
- Eco Driving Indicator
- Tire pressure
- Display off
Display items (F SPORT models)
Main meter in the center position
Press or of the meter control switches to display the following items:
- Drive information 1
- Drive information 2
- Gear position
- Tire pressure
- Units
- Display off
The main meter moved to the right
Press or of the meter control switches and select. Then press or to display the following items:
- Drive information 1
- Drive information 2
- Eco Driving Indicator
- G-force
- Gear Position
- Tire pressure
- Display off
Drive information 1/Drive information 2
Displays drive information such as the following:
Use the displayed values as a reference only.
- Drive information 1
- Current fuel consumption
- Average fuel economy (after reset)
- Drive information 2
- Distance (driving range)
- Average vehicle speed (after reset)
Displayed items (listed below) can be changed on
.
- Current fuel consumption
Bar type: Displays instantaneous current fuel consumption - Average fuel economy
After reset: Displays average fuel consumption since the display was reset*1
After start: Displays average fuel consumption since engine start
After refuel: Displays average fuel consumption since refuel - Average vehicle speed
After reset: Displays average vehicle speed since the display was reset*1
After start: Displays average vehicle speed since engine start - Elapsed time
After reset: Displays elapsed time since the display was reset*1
After start: Displays elapsed time since engine start - Distance
Driving range: Displays driving range with remaining fuel*2, 3
After starting: Displays the distance driven since engine start - Other
Blank: No item- To reset, display the desired item and press and hold “OK” on the meter control switches.
- This distance is computed based on your average fuel consumption. As a result, the actual distance that can be driven may differ from that displayed.
- When only a small amount of fuel is added to the tank, the display may not be updated.
When refueling, turn the engine switch off. If the vehicle is refueled without turning the engine switch off, the display may not be updated.
Eco Driving Indicator
- Eco Driving Indicator Light
During Eco-friendly acceleration (Eco driving), the Eco Driving Indicator Light will turn on. When the acceleration exceeds the Zone of Eco driving, or when the vehicle is stopped, the light turns off. - Eco Driving Indicator Zone Display
Suggests the Zone of Eco driving with cur-rent Eco driving ratio based on acceleration. - Eco driving ratio based on acceleration
If the acceleration exceeds the Zone of Eco driving, the right side of the Eco Driving Indicator Zone Display will illuminate.
At this time, the Eco Driving Indicator Light will turn off. - Zone of Eco driving
- Boost gauge
Displays the boost pressure. The dis-play will change color if the specified pressure is exceeded.
This display is intended for use as a guide-line. Depending on factors such as the road surface condition, temperature and vehicle speed, the display may not show the actual condition of the vehicle. - G-force (F SPORT models)
Displays lateral G-forces on the vehicle.
- Boost gauge
- Acceleration G-force on the vehicle
- Current G-force value (analyzed value of front/rear and left/right G-forces)
- Record of the maximum G-forces
This display is intended for use as a guideline. Depending on factors such as the road surface condition, temperature, and vehicle speed, the display may not show the actual condition of the vehicle.
Resetting the record of maximum G- forces
Press and hold “OK” of the meter control switches to reset the record.
Peak hold function
If lateral G-forces of 0.5 G or greater are generated, the G-force value display will turn amber and be held for 2 seconds.
Gear Position (F SPORT models)
Displays the current shift range or gear position when the shift lever is in D or S.
Units (F SPORT models)
The units of measure used can be changed while driving.
Unlike the unit setting performed on the settings display, the unit set performed on the drive information display can be changed while driving.
Eco Driving Indicator
Eco Driving Indicator will not operate under the following conditions:
- The shift lever is in any position other than D.
- A paddle shift switch is operated.
- The driving mode is set to other than normal mode or Eco drive mode.
- The vehicle speed is approximately 80 mph (130 km/h) or higher.
Navigation System-Linked Display
Select to display the following navigation system-linked information.
- Route guidance to the destination
- Compass display (heading-up display)
Audio system-linked display
Select to enable the selection of an audio source or track on the meter using the meter control switches.
Driving support system information display
Select to display the operational status of the following systems:
- LTA (Lane Tracing Assist)
- Dynamic radar cruise control with full-speed range
- RSA (Road Sign Assist) (if equipped)
Settings display
Meter display settings that can be changed
- Language
Select to change the language displayed. - Units
Select to change the units of measure displayed. - Speedometer display (except F SPORT models)
Select to set the display of the speedometer to digital or analog. - Drive information 1/Drive information 2
Select to select up to 2 items that will be displayed on each Drive information screen (Drive information 1 screen and Drive information 2 screen) respectively. - Clock Select to switch between 12-hour display and 24-hour display.
- Pop-up display
Select to enable/disable some pop-up dis-plays for each relevant system. - Rev indicator (F SPORT models)
- Select to enable/disable the rev indicator.
- Select to set the engine speed at which the rev indicator (amber) will begin to be displayed.
- Rev peak (F SPORT models)
Select to enable/disable the rev peak. - Eco Driving Indicator Light
Select to enable/disable the Eco Driving Indicator Light. - Default setting
Select to reset the meter display settings to the default setting.
Vehicle functions and settings that can be changed
Suspension of the settings display
- Some settings cannot be changed while driving. When changing settings, park the vehicle in a safe place.
- If a warning message is displayed, the operation of the settings display will be suspended.
WARNING
Cautions during setting up the display
As the engine needs to be running during setting up the display, ensure that the vehicle is parked in a place with adequate ventilation. In a closed area such as a garage, exhaust gases including harmful carbon monoxide (CO) may collect and enter the vehicle. This may lead to death or a serious health hazard.
NOTICE
During setting up the display
To prevent battery discharge, ensure that the engine is running while setting up the display features.
Suggestion Function
Displays suggestions to the driver in the following situations. To select a response to a displayed suggestion, use the meter control switches.
Suggestion to turn on the head-lights
If the headlights turn off, and the vehicle speed is 3 mph (5 km/h) or higher for a certain amount of time when the surroundings are dark, a suggestion message will be displayed.
Suggestion to turn off the head-lights
If the headlights are left on for a certain amount of time with the headlight switch in after the engine switch has been turned off, a suggestion message will be displayed asking if you wish to turn the headlights off.
To turn the headlights off, select “Yes”. If a front door is opened after the engine switch is turned off, this suggestion message will not be displayed.
Customization
Some functions can be customized.
FAQs
- What is the purpose of the speedometer in the Lexus ES250 2023?
You can check your speed while driving thanks to the speedometer, which shows the vehicle’s current speed in miles per hour (mph) or kilometers per hour (km/h). - How does the tachometer work, and what does it indicate?
The engine’s RPM (revolutions per minute) is measured by the tachometer. It provides information about the engine’s performance by displaying the engine crankshaft’s rotational speed. - What does the fuel gauge in the Lexus ES250 2023 indicate?
The fuel gauge lets you know how much fuel is still in the tank, so you can keep an eye on it and make refueling arrangements accordingly. - How can I interpret the engine temperature gauge?
The engine temperature gauge displays the coolant temperature. You can monitor the engine’s operating temperature and avoid overheating with its assistance. - What does the oil pressure gauge in the Lexus ES250 2023 measure?
The engine oil pressure is shown on the oil pressure gauge. It aids in making sure the engine is properly lubricated, which is necessary for ensuring smooth operation. - What is the purpose of the battery voltage gauge?
The battery voltage gauge shows the battery’s voltage level in the car. It enables you to keep track of the battery’s charging progress and guarantees the integrity of the electrical system. - Does the Lexus ES250 2023 have a separate gauge for monitoring tire pressure?
The Lexus ES250 2023 is outfitted with a tire pressure monitoring system, so the answer is yes. If the tire pressure is low, it displays a warning light rather than a specific gauge. - What does the odometer in the Lexus ES250 2023 measure?
The vehicle’s odometer shows the overall distance driven since it was first put into service. It makes it easier for you to monitor the mileage of the car. - Are there any indicators for monitoring engine warnings or malfunctions?
The check engine light and the oil pressure warning light are just two examples of the warning lights or indicators that are present in the instrument cluster of the Lexus ES250 2023. - Can I customize the display or settings of the gauges and meters in the Lexus ES250 2023?
It’s possible that the Lexus ES250 2023 will come with a variety of customizable gauges and meter. For details on how to alter these settings, consult the owner’s manual for your car. - How can I ensure that the gauges and meters are accurate in my Lexus ES250 2023?
The ES250 2023’s gauges and meters have been calibrated and accuracy-tested. However, it’s advised to have your vehicle inspected by a qualified technician if you suspect any inaccuracies. - What should I do if any gauge or meter in my Lexus ES250 2023 is not functioning properly?
A professional technician should inspect your vehicle to identify and fix any problems if a gauge or meter is not working properly. - Are there any specific maintenance requirements for the gauges and meters in the Lexus ES250 2023?
Generally speaking, the gauges and meter in the ES250 2023 don’t need any special maintenance. However, it’s crucial to adhere to the vehicle’s regular maintenance schedules to ensure overall effectiveness. - How can I reset the trip meter in the Lexus ES250 2023?
Different procedures may be used to reset the trip meter. For thorough instructions on how to reset the trip meters in your ES250 2023, consult the owner’s manual.
Useful Links
View Full User Guide: Lexus ES350 2023 User Manual | Auto User Guide
Download Manuals: Resources | Manuals & Guides | My Lexus
