2018 Lincoln Continental User Manual

The 2018 Lincoln Continental is a return to classic American luxury in a sleek, modern form. The unique design of this full-sized luxury sedan, with its big grille, smooth lines, and careful attention to detail, oozes elegance. Inside the large cabin, where plush leather, rich wood accents, and metal trim circle passengers, they are surrounded by a world of luxury. The 2018 Continental is a haven of ease and refinement, made to make every trip peaceful and luxurious for both the driver and the passengers. The 2018 Continental comes with a variety of strong engines that make the ride smooth and steady while still providing plenty of power. The SYNC 3 infotainment system shows how committed Lincoln is to new technology by making it easy to connect and manage entertainment and directions. The 2018 Lincoln Continental is the epitome of luxury, sophistication, and speed in the world of premium sedans. Its safety features and driver-assistance systems make driving even better.

Information Displays

Maintaining Your Head Up Display

• Do not place objects onto the transparent cover, as they may block you from seeing portions of the image. These objects could also damage the cover and affect the quality of the projected image.
• The system uses a special windshield designed to provide the optimum image quality. You must replace the windshield in a vehicle with this system with a certified original equipment manufactured (OEM) head-up display windshield.
• Replacing this system’s windshield with a non-head-up display windshield causes a double image or distorted image. Have an authorized dealer or authorized repair facility replace the windshield.
• Light conditions such as oncoming headlamps, sunrise, sunset or reflections off of wet road surfaces can affect the driver’s ability to see the HUD image.
• Clean the windshield often for optimal HUD performance.

AUTOMATIC CLIMATE CONTROL

Note: You can switch temperature units between Fahrenheit and Celsius.

• Power.
• Driver temperature control.
• MAX Defrost
• Air distribution control.
• MAX A/C.
• Passenger temperature control.
• A/C.
• Heated seats.
• Recirculated air.
• AUTO.
• Ventilated seats.
• Fan speed control.
• Heated rear window.
• Heated steering wheel or DUAL.

Power Press to switch the system on and off. When the system is off, it prevents outside air from entering the vehicle.

Driver Temperature Control
Adjusts the temperature setting on the driver’s side. This control also adjusts the passenger side temperature when you switch off dual zone mode.

MAX Defrost
Press to switch on the defrost. The driver and passenger settings set to HI, air flows through the windshield vents, and the fan adjusts to the highest speed. You can also use this setting to defog and clear the windshield of a thin covering of ice. The heated rear window also turns on when you select maximum defrost.

Note: To prevent window fogging, you cannot select recirculated air when maximum defrost is on.

Air Distribution Control
Press to switch airflow from the windshield, instrument panel, or footwell vents on or off. You can distribute air through any combination of these vents.

Note: At least one of these buttons remains on when the system is on.

MAX A/C
Press for maximum cooling. The driver and passenger settings are set to LO, recirculated air flows through the instrument panel vents, air conditioning turns on and the fan adjusts to the highest speed.

Passenger Temperature Control
Adjust the temperature setting on the passenger side.

A/C Press to switch the air conditioning on or off. Use A/C with recirculated air to improve cooling performance and efficiency.
Note: In certain conditions, for example, maximum defrost, the air conditioning compressor may continue to operate even though you switch off the air conditioning.

Heated Seats
Press to switch the heated seats on and off.

Recirculated Air
Press to switch between outside air and recirculated air. The air currently in the passenger compartment recirculates. This may reduce the time needed to cool the interior, when used with A/C, and reduce unwanted odors from entering your vehicle.

Note: Recirculated air may turn off, or prevent you from switching on, in all airflow modes except MAX A/C to reduce the risk of fogging. Recirculation may also be turned on and off in Panel or Panel/Floor air flow modes during hot weather in order to improve cooling efficiency.

AUTO
Press to switch on automatic operation. Adjust to select the desired temperature. Fan speed, air distribution, air conditioning operation, and outside or recirculated air adjust to heat or cool the vehicle to maintain the desired temperature. You can also switch off dual zone mode by pressing and holding for more than two seconds.

Automatic Fan Settings
The AUTO button illuminates for the following fan settings:

• When three indicators are on, the fan adjusts to the highest speed to reach the selected temperature as quickly as possible. When two indicators are on, the fan adjusts to a medium speed to reach the selected temperature with a reduced amount of cabin noise.
• When one indicator is on, the fan adjusts to the lowest speed to reach the selected temperature with the least amount of cabin noise.

Note: The system starts at the previous fan setting when you switch on AUTO.

Ventilated Seats
Press to switch the ventilated seats on and off.

Fan Speed Control
Adjusts the volume of air circulated in the vehicle.

Heated Rear Window
Press to switch the heated rear window on and off.

Heated Steering Wheel (If Equipped)
Press to switch the heated steering wheel on and off.

DUAL (If Equipped)
Press to switch on temperature control for the passenger side of the vehicle. When dual zone is off, passenger temperature settings remain the same as the driver settings.

HINTS ON CONTROLLING THE INTERIOR CLIMATE General Hints

• Note: Prolonged use of recirculated air may cause the windows to fog up.
• Note: You may feel a small amount of air from the footwell air vents regardless of the air distribution setting.
• Note: To reduce humidity build-up inside your vehicle, do not drive with the system switched off or with recirculated air always switched on.
• Note: Do not place objects under the front seats as this may interfere with the airflow to the rear seats.
• Note: Remove any snow, ice or leaves from the air intake area at the base of the windshield.
• Note: To improve the time to reach a comfortable temperature in hot weather, drive with the windows open until you feel cold air through the air vents.

Automatic Climate Control

• Note: Adjusting the settings when your vehicle interior is extremely hot or cold is not necessary.
• Note: The system adjusts to heat or cool the interior to the temperature you select as quickly as possible.
• Note: For the system to function efficiently, the instrument panel and side air vents should be fully open.
• Note: If you select AUTO during cold outside temperatures, the system directs airflow to the windshield and side window air vents. In addition, the blower motor may run at a slower speed until the engine warms up.
• Note: If you select AUTO during hot temperatures and the inside of the vehicle is hot, the system uses recirculated air to maximize interior cooling. The blower motor speed may also reduce until the air cools.

Quickly Heating the Interior

1. Press and release AUTO.
2. Adjust the temperature function to the setting you prefer.

Recommended Settings for Heating

1. Press and release AUTO.
2. Adjust the temperature function to the setting you prefer. Use 72°F (22°C) as a starting point, then adjust the setting as necessary.

Quickly Cooling the Interior

1. Press and release MAX A/C.

Recommended Settings for Cooling

1. Press and release AUTO.
2. Adjust the temperature function to the setting you prefer. Use 72°F (22°C) as a starting point, then adjust the setting as necessary.

Defogging the Side Windows in Cold Weather

1. Press and release defrost.
2. Adjust the temperature control to the setting you prefer. Use 72°F (22°C) as a starting point, then adjust the setting as necessary.

REAR PASSENGER CLIMATE CONTROLS (If Equipped)

• Rear fan speed control: Adjusts the volume of air circulated to the rear passenger compartment.
• Rear heated seats: Press to switch the rear heated seats on and off.
• Rear AUTO: Press to switch on automatic operation. Adjust to select the desired temperature. The fan speed and air distribution adjust to heat or cool the vehicle to maintain the temperature you desire.
• Rear air distribution control: Press to switch the direction of airflow.
• Rear passenger temperature control: Adjusts the temperature setting for the rear passenger compartment.
• Rear ventilated seats: Press to switch the rear ventilated seats on and off.
• Rear passenger power: Press to switch the rear system on and off.
• Note: The rear climate system turns off whenever you switch on the max defrost, and turns back on when you switch max defrost off. You can switch on the rear system with max defrost on. Rear control lock: When illuminated, you can only operate the rear passenger settings through the front controls. Note: The indicator briefly illuminates if you try to use the rear climate system when the controls are locked.

HEATED WINDOWS AND MIRRORS Note:
Make sure the engine is running before operating the heated windows.

Note: Depending on your remote start settings, the heated windows, mirrors and wipers may remain on after remote starting the vehicle.

Heated Rear Window
Press the button to clear the heated rear window of thin ice and fog. The heated rear window turns off after a short period of time. Press the button again to switch it off. It illuminates when you switch the system on.

Note: Do not use razor blades or other sharp objects to clean or remove decals from the inside of the heated rear window. The vehicle warranty does not cover damage caused to the heated rear window grid lines.

Heated Exterior Mirrors (If Equipped)
When you switch the heated rear window on, the heated exterior mirrors turn on.

Note:
Do not remove ice from the mirrors with a scraper or adjust the mirror glass when it is frozen in place.

Note: Do not clean the mirror housing or glass with harsh abrasives, fuel or other petroleum-based cleaning products.

Windshield Wiper De-icer (If Equipped)
The windshield wiper de-icer turns on in low temperatures or when you manually switch the heated rear window on.

CABIN AIR FILTER
Your vehicle is equipped with a cabin air filter, which gives you and your passengers the following benefits:

• It improves your driving comfort by reducing particle and odor concentration.
• It improves the interior compartment cleanliness.
• It protects the climate control components from particle deposits.

You can locate the cabin air filter behind the glove box.

Note: Make sure you have a cabin air filter installed at all times. This prevents foreign objects from entering the system. Running the system without a filter in place could result in degradation or damage to the system. Replace the filter at regular intervals. For additional cabin air filter information, or to replace the filter, see a qualified technician.

REMOTE START
The system adjusts the interior temperature depending on your chosen settings during remote start.  You cannot adjust the climate control setting during remote start operation. When you switch the ignition on, the climate control system returns to the previous settings. You can now make adjustments.

Some features may remain on if they turn on during remote start:

• Driver heated seat.
• Driver ventilated seat.
• Heated steering wheel.
• Heated mirrors.
• Heated rear window.
• Windshield wiper de-icer.

Note: If the passenger heated or ventilated seats are on when you switch the vehicle off, they default to the driver setting when you switch the vehicle on. You can adjust the default remote start settings using the information display controls.

Automatic Settings
In hot weather, the system sets to 72°F (22°C). The ventilated seats set to high (if available, and if you select AUTO in the information display). In moderate weather, the system heats or cools (based on pre-selected settings). The rear defroster, heated mirrors, and heated or ventilated seats do not turn on.  In cold weather, the system sets to 72°F (22°C). The heated seats and heated steering wheel set to high (if available, and if you select AUTO in the information display). The rear defroster and heated mirrors turn on.

SITTING IN THE CORRECT POSITION
When you use them properly, the seat, head restraint, safety belt and airbags will provide optimum protection in the event of a crash.

We recommend that you follow these guidelines:

• Sit in an upright position with the base of your spine as far back as possible.
• Do not recline the seatback more than 30 degrees.
• Adjust the head restraint so that the top of it is level with the top of your head and as far forward as possible. Make sure that you remain comfortable.
• Keep a sufficient distance between yourself and the steering wheel. We recommend a minimum of 10 in (25 cm) between your breastbone and the airbag cover.
• Hold the steering wheel with your arms slightly bent.
• Bend your legs slightly so that you can press the pedals fully.
• Position the shoulder strap of the safety belt over the center of your shoulder and position the lap strap tightly across your hips.

Make sure that your driving position is comfortable and that you can maintain full control of your vehicle.

HEAD RESTRAINTS
Adjust the seatback to an upright driving position before adjusting the head restraint. Adjust the head restraint so that the top of it is level with the top of your head and as far forward as possible. Make sure that you remain comfortable. If you are extremely tall, adjust the head restraint to its highest position. Front seat manual head restraints (If Equipped)

The front head restraints consist of:

• An energy-absorbing head restraint.
• Two steel stems.
• Guide sleeve adjust and unlock button.
• Guide sleeve unlocks and removes button.

Seats

You can also adjust this feature through the touchscreen. Press the Menu Settings icon, then Vehicle. Choose Multi-Contour Seats. When switched on, the system displays directions for you to adjust the lumbar settings in your seat or to set the massage function.

To access and make adjustments to the lumbar setting:

1. Choose the desired seat to adjust.
2. Press the + or – to adjust the lumbar intensity.

To access and make adjustments to the massage setting:

1. Press the Menu Settings icon, then Vehicle. Choose Multi-Contour Seats.
2. Choose the desired seat to adjust.
3. Press OFF, Low or High.

Saving a Preset Position

1. Switch the ignition on.
2. Adjust the memory features to your desired position.
3. Press and hold the desired preset button until you hear a single tone.

You can save up to three preset memory positions. You can save a memory preset at any time.

Recalling a Preset Position
Press and release the preset button associated with your desired driving position. The memory features move to the position stored for that preset.

Note:
You can only recall a preset memory position when the ignition is off, or when the transmission is in park (P) or neutral (N) (and your vehicle is not moving) if the ignition is on.

You can also recall a preset memory position by:

• Pressing the unlock button on your intelligent access key fob if it is linked to a preset position.
• Unlocking the intelligent driver door handle if a linked key fob is present.

Note: Using a linked key fob to recall your memory position when the ignition is off move the seat to the Easy Entry position.

Note: Pressing any active memory feature adjustment control, or any memory button during a memory recall, cancels the operation. Linking a Preset Position to your Remote Control or Intelligent Access Key Fob You can save preset memory positions for up to three remote controls or intelligent access (IA) keys.

1. With the ignition on, move the memory features to the desired positions.
2. Press and hold the preset button you desire for about five seconds. A tone sounds after a few seconds. Continue holding until you hear a second tone.
3. Within three seconds, press the lock button on the remote control you are linking.

To unlink a remote control, follow the same procedure – except in step 3, press the unlock button on the remote control.

Note: If more than one linked remote control or intelligent access key is in range, the memory function moves to the settings of the first key to initiate a memory recall.

Easy Entry and Exit Feature
If you enable the easy entry and exit feature, it moves the driver seat position rearward up to 2 in (5 cm) when you switch the ignition off. The driver seat returns to its previous position when you switch the ignition on.

Note: If you press any adjustment or memory button when in easy exit mode, the system cancels the operation. You can enable or disable this feature through the information display.

FAQ

Useful Link

2022 Lincoln Aviator User Manual
2019 Lincoln Continental Owner’s Manual