2018 Lincoln MKC Instrument Cluster Dashboard | How to use
The 2018 Lincoln MKC is a high-end small SUV that skillfully combines performance, sophistication, and cutting-edge technology. Its sophisticated instrument cluster dashboard is one of the main elements improving the driving experience. This tutorial will cover how to get the most out of the instrument cluster on the 2018 Lincoln MKC, including a thorough rundown of its features and instructions for navigating through its many settings. The 2018 Lincoln MKC’s instrument cluster was created with both style and usability in mind. With several features to help the driver, it acts as the command center for vital vehicle data. The instrument cluster is an essential part of the driving experience, offering functions such as speed and fuel level display as well as real-time performance metrics.
In summary, the instrument cluster of the 2018 Lincoln MKC is a sophisticated interface that provides drivers with both advanced features and necessary information, going beyond simply a group of gauges. In order to ensure that you can confidently and easily take advantage of all the features of this luxurious SUV, this guide aims to assist you in realizing the full potential of the instrument cluster.
2024 LINCOLN Corsair Specs, Price, Features, Mileage and Review
Instrument Cluster
GAUGES
- A Status Bar.
- B Speedometer.
- C Speedometer
- D Fuel gauge
- E Engine coolant temperature gauge
Information Display
Vehicle Settings and Personalization
Fuel Gauge
Note: The fuel gauge may vary slightly when your vehicle is moving or on a gradient.
Switch the ignition on. The fuel gauge will indicate approximately how much fuel is left in the fuel tank. The arrow adjacent to the fuel pump symbol indicates on which side of your vehicle the fuel filler door is located.
The needle should move toward F when you refuel your vehicle. If the needle points to E after adding fuel, this indicates your vehicle needs service soon.
After refueling some variability in needle position is normal:
It may take a short time for the needle to reach full after leaving the gas station. This is normal and depends upon the slope of the pavement at the gas station. The fuel amount dispensed into the tank is a little less or more than the gauge indicated. This is normal and depends upon the slope of pavement at the gas station.
If the gas station nozzle shuts off before the tank is full, try a different gas pump nozzle.
Low Fuel Level Reminder
A low fuel level reminder displays and sounds when the distance to empty reaches 50 mi (80 km) for MyKey, and at 35 mi (60 km), 25 mi (40 km), 10 mi (20 km) and 0 mi (0 km) for all vehicle keys.
Engine Coolant Temperature Gauge
Indicates engine coolant temperature. At normal operating temperature, the level indicator will be in the normal range. If the engine coolant temperature exceeds the normal range, stop your vehicle as soon as safely possible, switch off the engine and let the engine cool.
WARNING: Never remove the coolant reservoir cap when the engine is running or hot.
WARNING LAMPS AND INDICATORS
The following warning lamps and indicators alert you to a vehicle condition that may become serious. Some lamps illuminate when you start your vehicle to make sure they work. If any lamps remain on after starting your vehicle, refer to the respective system warning lamp for further information.
Note: Some warning indicators appear in the information display and operate the same as a warning lamp but do not illuminate when you start your vehicle.
Adaptive Cruise Control Indicator
It illuminates when you switch the system on. Lights when you turn the adaptive cruise control system on.
It illuminates white when the system is in standby mode. It illuminates green when you set the adaptive cruise speed.
Airbag Warning Lamp
If it does not illuminate when you switch the ignition on, continues
to flash or remains on when the engine is running, this indicates a malfunction. Have your vehicle checked as soon as possible.
Anti-Lock Brake System Warning Lamp
If it illuminates when you are driving, this indicates a malfunction. Your vehicle continues to have normal braking without the anti-lock brake system function. Have your vehicle checked as soon as possible.
Auto Hold Active
It illuminates when the system holds your vehicle stationary.
Auto Hold Unavailable
It illuminates when the system is on, but unavailable to hold your vehicle stationary.
Automatic High Beam Control
It illuminates when the system automatically turns the headlamp high beam on.
Auto-Start-Stop Indicator
It will illuminate to inform you when the engine shuts down or in conjunction with a message.
Battery
If it illuminates while driving, it indicates a malfunction. Switch off all unnecessary electrical equipment and have the system checked by an authorized dealer immediately.
Blind Spot Information System Indicator
Lights when you switch this feature off or with a blind spot message.
Brake System Warning Lamp
WARNING: Driving your vehicle with the warning lamp on is dangerous. A significant decrease in braking performance may occur. It may take you longer to stop your vehicle. Have your vehicle checked as soon as possible. Driving extended distances with the parking brake engaged can cause brake failure and the risk of personal injury.
Cruise Control Indicator
It illuminates when you switch the system on.
Direction Indicator
Illuminates when the left or right direction indicator or the hazard warning flasher is turned on.
Flashes during operation. An increase in the rate of flashing warns of a failed indicator bulb.
Door Ajar
Displays when the ignition is on and any door is not completely closed.
Electric Park Brake
It illuminates or flashes when the electric parking brake has a malfunction. See Electric Parking Brake
Engine Coolant Temperature Warning Lamp
If it illuminates when your vehicle is moving, this indicates that the engine is overheating. Stop your vehicle as soon as it is safe to do so and switch the engine off. Have your vehicle checked as soon as possible.
Fasten Seatbelt Warning Lamp
It illuminates and a chime sounds until you fasten the seatbelts.
Front Fog Lamp Indicator
It illuminates when you switch the front fog lamps on.
Front Airbag
Lights when you start your vehicle. If it continues to flash or remains on, it indicates a malfunction. Have an authorized dealer check the system.
Heads Up Display
A red beam of lights appears on the windshield in certain
instances when using adaptive cruise control or the collision warning system. It will also illuminate momentarily when you start your vehicle to make sure the display works.
Headlamp High Beam Indicator
Headlamp High Beam Indicator
Lights when you switch on the high-beam headlamps. Flashes when you use the headlamp
1
Hood Ajar
Displays when the ignition is on and the hood is not completely closed.
Lane Keeping System Lamp
Lights when you activate the lane
keeping system.
Low Fuel Level Warning Lamp
If it illuminates when you are driving, refuel as soon as possible.
Low Tire Pressure Warning Lamp
It illuminates when your tire pressure is low. If the lamp remains on with the engine running or when driving, check your tire pressure as soon as possible.
It also illuminates momentarily when you switch the ignition on to confirm the lamp is functional. If it does not illuminate when you switch the ignition on, or begins to flash at any time, have the system checked by your authorized dealer.
Low Washer Fluid Level Warning Lamp
It illuminates when the washer fluid is low.
Oil Pressure Warning Lamp
It illuminates when you switch the ignition on.
If it illuminates when the engine is running this indicates a malfunction. Stop your vehicle as soon as it is safe to do so and switch the engine off. Check the engine oil level. If the oil level is sufficient, this indicates a system malfunction. Have your vehicle checked as soon as possible.
Parking Lamps
It illuminates when you switch the parking lamps on.
Powertrain Fault
Illuminates when the system detects a powertrain or an AWD fault. Contact an authorized dealer as soon as possible.
Note: If your vehicle detects certain faults, it will not allow you to operate the accelerator pedal. If this happens, press the brake pedal and release it. This will activate limp home vehicle operation. In limp home vehicle operation, your vehicle will accelerate in a controlled manner up to a maximum speed of 35 mph (56 km/h) on a flat surface. If you apply the brake pedal or move the transmission to neutral (N) you can override your vehicle’s acceleration.
Service Engine Soon
If it illuminates when the engine is running this indicates a malfunction. The On Board Diagnostics system has detected a malfunction of the vehicle emission control system.
If it flashes, engine misfire may be occurring. Increased exhaust gas temperatures could damage the catalytic converter or other vehicle components. Drive in a moderate fashion (avoid heavy acceleration and deceleration) and have your vehicle immediately serviced.
It illuminates when you switch the ignition on prior to engine start to check the bulb and to indicate whether your vehicle is ready for Inspection and Maintenance (I/M) testing.
Normally, it illuminates until the engine is cranked and automatically turns off if no malfunctions are present. However, if after 15 seconds it flashes eight times, this indicates that your vehicle is not ready for Inspection and Maintenance (I/M) testing.
Stability Control
Flashes when the system is active.
If it stays lit or does not light when you switch on the ignition, this indicates a malfunction. During a malfunction, the system will switch off. Have an authorized dealer check the system immediately. See
Stability Control Off
It illuminates when you switch the system off.
AUDIBLE WARNINGS AND INDICATORS
Keyless Warning Alert
The horn will sound twice when you exit your vehicle with the intelligent access key and your vehicle is in RUN, indicating your vehicle is still on.
Headlamps On Warning Chime
Sounds when you remove the key from the ignition and open the driver’s door and you have left the headlamps or parking lamps on.
Parking Brake On Warning Chime
Sounds when you have left the parking brake on and drive your vehicle. If the warning chime remains on after you have released the parking brake, have the system checked by your authorized dealer immediately.
FAQs
The driver’s primary information center is the instrument cluster, which shows important information like engine temperature, speed, fuel level, and various vehicle alerts.
Find the brightness control button, which is typically located on the dashboard or close to the instrument cluster. Adapt the configuration to suit your needs.
Warning lights suggest possible problems with the car. To understand specific warning symbols and take the necessary action, consult the owner’s manual.
Certain features may be customizable, depending on the model. For details on customizing the instrument cluster, consult your owner’s manual.
On the instrument cluster, there is usually a button with the labels “Trip” or “Reset.” In order to reset the trip odometer, press and hold it.
It is evident from the low fuel warning that you have an extremely low fuel level. Locate the closest gas station in order to prevent running out of fuel.
Use the steering wheel or instrument cluster control buttons to cycle through the different information screens.
Check the settings menu on the instrument cluster. There ought to be a way for you to change the measurement units.
To solve problems like flickering or total failure, refer to the troubleshooting guide in your owner’s manual. If issues continue, get help from a professional.
For information on recommended tire pressure and TPMS symbols, consult the owner’s manual. Inspect and adjust tire pressure accordingly.
Authorized service centers usually handle software updates. To find out about any updates that are available, speak with your dealer.
The coolant temperature is reflected in the engine temperature gauge. To avoid overheating, stop and switch off the engine if it goes into the red zone.
Access the settings menu on the instrument cluster or infotainment system to locate the clock adjustment options.
The majority of contemporary cars come equipped with an automated night mode that modifies the instrument cluster’s brightness in response to outside light levels.
Yes, depending on mileage or time intervals, the instrument cluster frequently shows maintenance reminders. To guarantee prompt vehicle maintenance, adhere to the instructions.
Useful Links
View Full PDF: 2018 Lincoln MKC User Manual| Auto User Guide
2024 LINCOLN Corsair Specs, Price, Features, Mileage and Review
2018 Lincoln MKC Fuses and Fuse Box | How to fix a blown fuse