Auto User Guide

2022 Lincoln Corsair Doors and Locks | How to Fix

Lincoln-logo

2022 Lincoln Corsair Doors and Locks | How to Fix

There is a great mix of luxury, speed, and new features in the 2022 Lincoln Corsair. The advanced door and lock system is no different. With great care and attention to detail, the Corsair’s doors are more than just entrances; they’re a perfect blend of style and function. To keep the car safe without sacrificing ease, it has a high-tech locking system. But, as with any complicated system, problems may happen from time to time. Here are some things you can try to fix problems with the doors or locks if they don’t work right. First, make sure the key fob is properly synced and that the battery is charged. Then, look for any obvious problems. If the problems don’t go away, the owner’s manual or a certified Lincoln repair center can give you all the information and professional help you need to make sure your Corsair keeps giving you a perfect driving experience.

LOCKING AND UNLOCKING

You can use the power door lock or the remote control to lock and unlock your vehicle.

Note: Do not use the door latch assembly to attach any accessory, such as handles or steps, as this can cause damage to your vehicle.

Power Door Locks
The power door lock is on the driver and front passenger door panels.2022 Lincoln Corsair-Doors and Locks-fig 1

  1. Unlock.
  2. Lock.

Door Lock Indicator
An LED on each door window trim lights when you lock the door. It remains on for up to five minutes after you switch the ignition off.

Switch Inhibitor
When you electronically lock your vehicle, the power door lock and interior luggage compartment release switch no longer operate after 20 seconds. Make sure you unlock your vehicle with the remote control, intelligent access, or keyless keypad, or switch the ignition on, to restore function to these switches. You can switch this feature on or off from the touchscreen.

Remote Control
You can use the remote control at any time. The luggage compartment release button only works when your vehicle speed is less than 3 mph (5 km/h).

Unlocking the Doors (Two-Stage Unlock)
2022 Lincoln Corsair-Doors and Locks-fig 2Press the button to unlock the driver’s door. Press the button again within three seconds to unlock all doors. The turn signals flash. Press and hold both the lock and unlock buttons on the remote control for four seconds to disable or enable two-stage unlocking. Disabling two-stage unlocking allows all vehicle doors to unlock with one press of the button. The turn signals flash twice to indicate a change to the unlocking mode. The unlocking mode applies to the remote control, keyless entry keypad, and intelligent access. Intelligent access at the driver door unlocks all doors when you disable two-stage unlocking.

Locking the Doors
2022 Lincoln Corsair-Doors and Locks-fig 3Press the button to lock all the doors. The turn signals flash. Press the button again within three seconds to confirm that all the doors have closed. The doors lock again, a tone sounds and the turn signals flash if all the doors and the luggage compartment have closed.

Matlock
If any door or the luggage compartment is open, or if the hood is open on vehicles with an anti-theft alarm or remote start, a tone sounds and the turn signals do not flash. You can switch this feature on or off from the touchscreen. See Settings (page 555).

Audible and Visual Locking Confirmation
If audible and visual locking confirmation is configurable, you can turn it on or off from the touchscreen.

Mechanical Key
The intelligent access key also contains a removable key blade that you can use to lock and unlock your vehicle. Turn the top of the key toward the front of your vehicle once to lock all doors. Turn the top of the key toward the rear of your vehicle once to unlock the driver door only.

Locking and Unlocking the Doors with the Key Blade2022 Lincoln Corsair-Doors and Locks-fig 4
If the central locking function does not operate, lock the doors using the key blade in the door handle lock cylinder.

Locking with the Key Blade
Insert the key blade into the driver door handle lock cylinder, and turn the key up toward the front of your vehicle to lock.

Unlocking with the Key Blade
Insert the key blade into the driver door handle lock cylinder and turn the key down toward the rear of your vehicle to unlock.

Opening a Rear Door from Inside
Pull the interior door handle twice to unlock and open the rear door. The first pull unlocks the door and the second pull unlatches the door.

Activating Intelligent Access
General Information
You can unlock and lock the vehicle without taking the keys out of your pocket or purse when your intelligent access key is within 3 ft (1 m) of your vehicle. Intelligent access uses a sensor on the back of the door handle for unlocking, and a separate sensor on the face of each door handle for locking. The system does not function if:

  • Your vehicle battery has no charge.
  • The key battery has no charge.
  • The key frequencies have jammed.

Note: The system may not function if the intelligent access key is close to metal objects or electronic devices, for example, keys or a cell phone.

Note: If the system does not function, use the key blade to lock and unlock your vehicle.

Unlocking Using Intelligent Access2022 Lincoln Corsair-Doors and Locks-fig 5
With your intelligent access key within 3 ft (1 m) of your vehicle, touch the unlock sensor on the back of the door handle for a brief period and then pull on the door handle to unlock, being careful not to touch the lock sensor at the same time or pull on the door handle too quickly. The intelligent access system requires a brief delay to authenticate your intelligent access key.

Locking Using Intelligent Access2022 Lincoln Corsair-Doors and Locks-fig 6

With your intelligent access key within 3 ft (1 m) of your vehicle, touch the outer door handle lock sensor for approximately one second to lock, being careful not to touch the unlock sensor on the back of the door handle at the same time. After locking, you can immediately pull on the door handle to confirm locking occurred without inadvertently unlocking.

At the Liftgate
Press the exterior liftgate release button inside the top of the liftgate pull-cup handle.

Smart Unlocks
This feature helps to prevent you from unintentionally locking your intelligent access key inside the passenger compartment or rear cargo area. When you lock your vehicle with the door open and the ignition off, your vehicle searches for an intelligent access key in the passenger compartment after you close the door. If your vehicle finds a key, all the doors immediately unlock.

You can override the smart unlock feature and intentionally lock the intelligent access key inside your vehicle. To do this, lock your vehicle after you have closed all the doors by:

  • Using the keyless entry keypad.
  • Pressing the lock button on another intelligent access key.
  • Touching the locking area on the handle with another intelligent access key in your hand.

When you open one of the front doors with the ignition on, and lock your vehicle using the power door lock, all doors lock, and then unlock.

Autolock (If Equipped)
Autolock locks all the doors when all of the following occur:

  • You have closed all doors.
  • The ignition is on.
  • You shift into any gear putting your vehicle in motion.
  • Your vehicle reaches a speed greater than 12 mph (20 km/h).

Autolock repeats when:

  • You open, and then close any door while the ignition is on and your vehicle speed is 9 mph (15 km/h) or lower.
  • Your vehicle reaches a speed greater than 12 mph (20 km/h).

Auto unlock (If Equipped)
Auto unlock unlocks all the doors when:

  • The ignition is on, you have closed all the doors, and your vehicle has been moving at a speed greater than 12 mph (20 km/h).
  • Your vehicle comes to a stop and you switch the ignition off or to the accessory
  • You open the driver’s door within 10 minutes of switching the ignition or to the accessory.

Note: The doors do not auto-unlock if you electronically lock your vehicle after you switch the ignition off before you open the driver door.

Enabling or Disabling
You can enable or disable the feature from the touchscreen or an authorized dealer can do it for you.

Illuminated Entry (If Equipped)
The interior lamps and select exterior lamps light when you unlock the doors with the remote control.
The system turns off the lights if:

  • You start your vehicle.
  • You press the remote control lock button.
  • They are on for 25 seconds.

The lights do not turn off if:

  • You switch them on with the lamp control.
  • Any door is open.

Illuminated Exit
The interior lamps and select exterior lamps light when you have closed all the doors and switch the ignition off. The lamps turn off if all the doors remain closed and either of the following occurs:

  • After 25 seconds elapse.
  • You lock your vehicle from the outside.

Battery Saver
If you leave the courtesy lamps or dome lamps on and switch the ignition off, this feature turns them off after some time.

Accessory Mode Battery Saver for Intelligent Access Keys
If you leave your vehicle with the ignition on, it turns off 30 minutes after you close all the doors.

Welcome Lighting
This feature lights select exterior lighting as you approach your vehicle. You must have an intelligent access key with you. The feature turns off when you open a door, lift a gate, or unlock your vehicle. Welcome lighting remains on for 25 seconds or until you start your vehicle.

The feature is active when:

  • You configure the feature from the touchscreen. See Welcome Lighting.
  • The ignition is off.
  • You have closed all the doors and the liftgate.
  • You lock your vehicle.

The feature disables when:

  • Your vehicle detects the intelligent access key is inside.
  • The intelligent access key is in close range of the vehicle for more than two minutes.
  • The anti-theft alarm triggers.
  • You do not start your vehicle for more than five days.
  • The vehicle battery charge is low.
  • You approach the vehicle to trigger the welcome lighting feature 10 or more times without switching the ignition on.

Note: When this feature is disabled, you must switch the ignition on to reset it.

Note: This feature may not correctly operate if you store the intelligent access key within 8–15 ft (2.4–4.6 m) of your vehicle while not in use.

Note: Welcome Lighting does not function if you disable it from the touchscreen.

FAQs

Question: Why might the doors on my 2022 Lincoln Corsair be difficult to open or close?

Answer: Difficulty in opening or closing doors could be due to misalignment, damaged hinges, or issues with the door latch mechanism.

Question: What should I do if my Lincoln Corsair’s doors are making a squeaking noise when opening or closing?

Answer: Lubricate the door hinges with a suitable lubricant to address squeaking noises.

Question: Are there any common issues with the power door locks in the 2022 Lincoln Corsair?

Answer: Yes, common problems include faulty actuators, wiring issues, or problems with the central locking system.

Question: How can I troubleshoot a power door lock that is not working on my Corsair?

Answer: Check the fuse, inspect the wiring for damage, and test the door lock actuator for proper function.

Question: What are the possible causes if my Lincoln Corsair’s doors don’t lock or unlock with the key fob?

Answer: Potential issues could include a weak or dead battery in the key fob, a malfunctioning key fob, or problems with the vehicle’s central locking system.

Question: Are there any DIY solutions for fixing a sticky door lock?

Answer: Try using a graphite-based lubricant on the lock mechanism to address stickiness. If the problem persists, consult a professional.

Question: Is there a way to manually unlock the doors if the key fob battery is dead?

Answer: Some vehicles have a hidden key slot on the driver’s door handle for manual unlocking when the key fob battery is dead.

Question: What steps should I take if my Corsair’s doors won’t stay locked?

Answer: Check for issues with the door latch mechanism, and inspect the central locking system for malfunctions.

Question: Are there any recalls or common issues related to the doors on the 2022 Lincoln Corsair?

Answer: Check with the manufacturer or visit the National Highway Traffic Safety Administration (NHTSA) website for information on recalls or common issues.

Question: How can I fix a door that is not aligning properly with the body of the vehicle?

Answer: Adjust the door hinges or seek professional assistance to ensure proper alignment.

Question: What could cause the automatic door locks to engage while driving?

Answer: Possible causes include a malfunctioning sensor, wiring issues, or problems with the central locking module.

Question: Why is my Corsair’s door ajar warning light constantly illuminated?

Answer: The door ajar warning light may be triggered by a faulty door sensor or a problem with the door latch mechanism.

Question: How can I enhance the security of my 2022 Lincoln Corsair doors?

Answer: Consider adding aftermarket security features such as an additional alarm system or steering wheel lock for added protection.

Question: Can I replace the door lock actuator on my own, or should I seek professional help?

Answer: It is possible to replace the door lock actuator yourself, but it may require technical skills. If unsure, it’s advisable to seek professional assistance.

Question: How can I prevent my Lincoln Corsair’s doors from freezing shut in cold weather?

Answer: Apply silicone spray or other de-icing products on the door seals, and regularly clean out any ice or snow accumulation around the door edges.

View Full PDF: 2022 Lincoln Corsair User Manual | Auto User Guide

2022 Lincoln Corsair Keys and Remote Controls Instructions