2022 Lincoln Corsair Seats Adjustment Instructions

The inside of the 2022 Lincoln Corsair is very nice and comfy, and the seats are the best part of driving it. Careful attention to detail went into making the Corsair’s seats, so they look good and work well. To accommodate the different tastes of drivers and guests, the Lincoln Corsair has high-tech features for adjusting the seats. The seats are easily adjustable so that they are the most comfortable for any trip, whether it’s a short trip in the city or a long one. The 2022 Lincoln Corsair has easy-to-use buttons and interfaces that make it simple to change the seating position. With its many adjustable and comfortable seat positions, the Corsair lets you choose whether you want to be higher for better visibility or lower for a more relaxed drive position. This careful attention to detail in the interior design of the 2022 Lincoln Corsair makes sure that every trip is not only stylish but also fits the needs of the driver and guests.

SITTING IN THE CORRECT POSITION

WARNING: Sitting improperly, out of position, or with the seatback reclined too far can take the weight off the seat cushion and affect the decision of the passenger sensing system, resulting in serious injury or death in the event of a crash. Always sit upright against your seat back, with your feet on the floor.

WARNING: Do not recline the seat backrest too far as this can cause the occupant to slide under the seatbelt, resulting in personal injury in the event of a crash.

WARNING: Do not place objects higher than the top of the seat backrest. Failure to follow this instruction could result in personal injury or death in the event of a sudden stop or crash.

When you use them properly, the seat, head restraint, seatbelt, and airbags will provide optimum protection in the event of a crash. We recommend that you follow these guidelines:

• Sit in an upright position with the base of your spine as far back as possible.
• Do not recline the seat backrest so that your torso is more than 30 degrees from the upright position.
• Adjust the head restraint so that the top of it is level with the top of your head and as far forward as possible. Make sure that you remain comfortable.
• Keep a sufficient distance between yourself and the steering wheel. We recommend a minimum of 10 in (25 cm) between your breastbone and the airbag cover.
• Hold the steering wheel with your arms slightly bent.
• Bend your legs slightly so that you can press the pedals fully.
• Position the shoulder strap of the seatbelt over the center of your shoulder and position the lap strap tightly across your hips.

Make sure that your driving position is comfortable and that you can maintain full control of your vehicle.

HEAD RESTRAINTS

WARNING: Fully adjust the head restraint before you sit in or operate your vehicle. This will help minimize the risk of neck injury in the event of a crash. Do not adjust the head restraint when your vehicle is moving.

WARNING: The head restraint is a safety device. Whenever possible it should be installed and properly adjusted when the seat is occupied. Failure to adjust the head restraint properly could reduce its effectiveness during certain impacts.

WARNING: Adjust the head restraints for all passengers before you drive your vehicle. This will help minimize the risk of neck injury in the event of a crash. Do not adjust the head restraints when your vehicle is moving.

Note: Adjust the seat backrest to an upright driving position before adjusting the head restraint. Adjust the head restraint so that the top of it is level with the top of your head and as far forward as possible. Make sure that you remain comfortable. If you are extremely tall, adjust the head restraint to its highest position.

Front Seat Head Restraint
The head restraint consists of:

1. An energy-absorbing head restraint.
2. Two steel stems.
3. Guide sleeve adjust and unlock button.

Rear Seat Outermost Head Restraint
The head restraint consists of

1. An energy-absorbing head restraint.
2. Two steel stems.
3. Guide sleeve adjust and unlock button.
4. Guide sleeve unlocks and removes button.

Rear Seat Center Head Restraint
The head restraint consists of:

1. An energy-absorbing head restraint.
2. Two steel stems.
3. Guide sleeve unlocks and removes button.

Raising the Head Restraint
Pull the head restraint up.

Lowering the Head Restraint

1. Press and hold button C.
2. Push the head restraint down.

Tilting the Front Seat Head Restraint (If Equipped)
The front head restraint tilts for extra comfort.

To tilt the head restraint:

1. Adjust the seat backrest to an upright driving or riding position.
2. Pivot the head restraint forward toward your head to the preferred position.

After the head restraint reaches the forward-most tilt position, pivot it forward again to release it to the rearward, un-tilted position.

Removing the Head Restraint

Removing the Front Seat Head Restraint

1. Pull the head restraint up until it reaches its highest position.
2. Press and hold button C.
3. Pull the head restraint up.

Removing the Rear Seat’s Outermost Head Restraints

1. Pull the head restraint up until it reaches its highest position.
2. Press and hold buttons C and D.
3. Pull the head restraint up.

Removing the Rear Seat Center Head Restraint

1. Pull the head restraint up until it reaches its highest position.
2. Press and hold button C.
3. Pull the head restraint up.

Installing the Head Restraint
Align the steel stems into the guide sleeves and push the head restraint down until it locks.

POWER SEATS

WARNING: Do not adjust the driver seat or seat backrest when your vehicle is moving. This may result in sudden seat movement, causing the loss of control of your vehicle.

WARNING: Do not place cargo or any objects behind the seat backrest before returning it to its original position. Pull on the seat backrest to make sure that it has fully latched after returning the seat backrest to its original position. An unlatched seat may become dangerous if you stop suddenly or have a crash.

The power seat controls are on the door.

1. Recline.
2. Lumbar control.
3. Memory function.
4. Power seat.

Press this button to access the lumbar menu on the touchscreen.

 

 

 

10-Way Seat Controls (If Equipped)

8-Way Seat Controls (If Equipped)

24-Way Seat Controls (If Equipped)

The power seat controls are on the door.

1. Lumbar control or multi-contour seat control.
2. Memory function.
3. Seat cushion adjustment.
4. Power seat.
5. Recline.

Press this button to access the lumbar menu on the touchscreen.

 

 

 

Adjusting the Length of the Seat Cushion

Adjusting the Multi-Contour Front Seats With Active Motion (If Equipped)
You can adjust this feature through the touchscreen.

Note: The engine must be running or the vehicle must be in accessory mode to activate the seats.

Note: Allow a few seconds for any selection to activate. The seat backrest and cushion massage cannot function at the same time.

MEMORY FUNCTION

WARNING: Before activating the memory seat, make sure that the area immediately surrounding the seat is clear of obstructions and that all occupants are clear of moving parts.

WARNING: Do not use the memory function when your vehicle is moving.

This feature recalls the position of the following:

• Driver seat.
• Power mirrors.
• Optional power steering column.

The memory control is on the driver’s door.

Saving a Preset Position

1. Switch the ignition on.
2. Adjust the memory features to your preferred positions.
3. Press and hold the preferred reset button until you hear a single tone.

Note: A confirmation that you saved a memory preset appears in the information display.
You can save up to three preset memory positions. You can save a memory preset at any time.

Recalling a Preset Position
Press and release the preset button associated with your preferred driving position. The memory features move to the position stored for that preset.

Note: You can only recall a preset memory position when the ignition is off, or when the transmission is in park (P) or neutral (N) and the ignition is on.

Note: Press any seat or mirror adjustment switch, or any memory button during a memory recall, to cancel the operation.
You can also recall a preset memory position by:

• Pressing the unlock button on your remote control if you linked it to a preset position.
• Unlocking the driver door if a linked remote control is present.

Note: Using a linked remote control to recall your memory position when the ignition is off move the seat and steering column to the Easy Entry position.

Linking a Preset Position to Your Remote Control
For information on linking a preset position to your remote control, see the Personal Profiles section.

Easy Entry and Exit Feature
If you enable the easy entry and exit feature, it moves the driver seat position rearward up to 2 in (5 cm) when you switch the ignition off. The driver seat returns to the previous position when you switch the ignition on. You can enable or disable this feature through the information display.

Personal Profiles
This feature allows you to create multiple personal profiles enabling users to personalize the vehicle’s settings. You can create one profile for each preset memory seat button along with a guest profile. You can recall a profile using the touchscreen or the preset button you selected when you created your profile. You can also link a remote control and a mobile device to your profile, which is used to recall it.

Creating a Personal Profile
Use the touchscreen to create a personal profile.

1. Switch the ignition on and leave the vehicle in park (P).
2. Select the Personal Profiles button under Settings.
3. Follow the instructions on the display.

Linking a Personal Profile to Your Remote Control or Mobile Device
You can save preset memory positions for up to three remote controls by assigning a remote control to a personal profile using the touchscreen. You can assign three additional remote controls set up as a Phone as a Key. Use the touchscreen to link a remote control, mobile device, or both to a personal profile.

1. Switch the ignition on and leave the vehicle in park (P).
2.  Select the Personal Profiles button under Settings.
3. Touch the arrow for the profile you wish to link to a remote control or mobile device.
4.  Select remote control, mobile device, or both.
5. Follow the instructions on the display.

Note: To successfully link a mobile device, the mobile device must be in your vehicle and must have previously been set up as a remote control for your vehicle.

Note: If more than one linked remote control is in range, the memory function moves to the settings of the first key to initiate a memory recall.

Note: The guest profile consists of existing settings when there is no driver profile created. After you create a driver profile, the guest profile serves as an additional driver profile.

Note: You cannot link a personalized name, a memory seat button, or a remote control to a guest profile.

Personal Settings
Personal Profiles allow you to personalize positional settings such as seats and mirrors, as well as non-positional settings such as radio, navigation, driver assist, and system settings. You cannot change the menu locations and settings of those personalized features with Personal Profiles.

Note: Non-positional settings save to the active driver profile whenever you change a setting.

Note: You can save positional settings if you press and hold a memory seat button.

Recalling and Changing a Profile
You can recall a profile by:

• Using a remote control or mobile device linked to a driver profile to access the remote start feature, press an unlock button or open the door with the exterior door handle.
• Pressing a memory seat button linked to a driver profile.
• Using the Personal Profiles menu on the touchscreen.

Note: The recalled profile replaces the previously active profile. If the active profile is not your preferred profile, you can change it using any of the three methods listed.

When you switch on the Personal Profiles feature:

• Unlocking a door with a remote control or mobile device that is not linked to a driver profile does not change the active profile, but remains in the last known profile. It does not change the positional settings.
• Pressing a memory seat button that is not linked to a driver profile or saved to a preset setting does not change the active profile, but remains in the last known profile. It does not change the positional settings.
• Pressing a memory seat button that is not linked to a driver profile but is saved to a preset setting does not change the active profile, but remains in the last known profile. It recalls the positional settings that you saved to that memory seat button.

When you switch off a Personal Profiles feature:

• Unlocking a door with a remote control or mobile device does not recall any non-positional settings but still recalls positional settings from the driver profile to which the remote control or mobile device is linked.
• Pressing a memory seat button that is not linked to a driver profile or saved to a preset setting does not change the positional or non-positional settings.
• Pressing a memory seat button that is linked to a driver profile or has saved to a preset setting recalls the positional settings that you saved to that memory seat button.

REAR SEATS

Moving the Seats Backward and Forward

WARNING: Make sure the seat fully locks into place by rocking it backwards and forward.

Folding the Seat Backrest (If Equipped)

With the seat empty, pull the lever up to fold the seat backrest forward. You may need to lower the center head restraint first.

Unfolding the Seat Backrest
Pull the seat backrest up to unfold the seat backrest.

Recline Adjustment
With the seat occupied, pull the lever up to recline the seat backrest.

Folding the Power Seat Backrest (If Equipped)

1. Folds the left-hand rear seat backrest.
2. Folds the right-hand rear seat backrest.

Press and hold the button for a few seconds to fold the corresponding seat.

HEATED SEATS

Front Seats

WARNING: People who are unable to feel pain in their skin because of advanced age, chronic illness, diabetes, spinal cord injury, medication, alcohol use, exhaustion, or other physical conditions, must exercise care when using the heated seat. The heated seat may cause burns even at low temperatures, especially if used for long periods. Do not place anything on the seat that insulates against heat, such as a blanket or cushion. This may cause the heated seat to overheat. Do not puncture the seat with pins, needles, or other pointed objects. This may damage the heating element which may cause the heated seat to overheat. An overheated seat may cause serious personal injury.

Do not do the following:

• Place heavy objects on the seat.
• Operate the heated seat if water or any other liquid spills on the seat. Allow the seat to dry thoroughly.

Note: The heated seats will only function when the engine is running.

Press the heated seat symbol to cycle through the various heat settings and off. More indicator lights indicate warmer settings.

Note: After 90 minutes of operation, the heated seats switch off. Press the heated seat symbol to switch the heated seats on.

Note: Depending on your remote start settings, the heated seats may remain on after you remote start your vehicle. The heated seats may also turn on when you start your vehicle if they were on when your vehicle was turned off.

Rear Seats (If Equipped)

WARNING: Persons who are unable to feel pain in the skin because of advanced age, chronic illness, diabetes, spinal cord injury, medication, alcohol use, exhaustion, or other physical conditions, must exercise care when using the seat heater. The seat heater may cause burns even at low temperatures, especially if used for long periods. Do not place anything on the seat that insulates against heat, such as a blanket or cushion, because this may cause the seat heater to overheat. Do not puncture the seat with pins, needles, or other pointed objects because this may damage the heating element which may cause the seat heater to overheat. An overheated seat may cause serious personal injury.

Do not do the following:

• Place heavy objects on the seat.
• Operate the seat heater if water or any other liquid spills on the seat. Allow the seat to dry thoroughly.

Note: The heated seats will only function when the engine is running.
The rear seat heat controls are located on the rear of the center console.

Press the heated seat symbol to cycle through the various heat settings and off. More indicator lights indicate warmer settings.

VENTILATED SEATS (IF EQUIPPED)

Note: The ventilated seats switch on during a remote start if they are enabled. See Enabling Remote Start (page 166). The ventilated seats may also switch on when you start your vehicle if they were on when you previously switched your vehicle off.

Do not do the following:

• Spill liquid on the front seats. This may cause the air vent holes to become blocked and not work properly.
• Place cargo or objects under the seats. They may block the air intake causing the air vents to not work properly.

The ventilated seats only function when the engine is running.

Press this symbol to cycle through the various ventilation settings and off. More indicator lights indicate higher fan speeds. If the engine falls below 350 RPM while the ventilated seats are on, the feature turns itself off. You need to reactivate it.

Note: To improve comfort, use the ventilated seats along with the vehicle’s air conditioning system.

FAQs

Useful Link

View Full PDF: 2022 Lincoln Corsair User Manual | Auto User Guide

2022 Lincoln Corsair Steering Wheel Control system Guidelines