2022 Lincoln Nautilus Wipers and Washers Guidelines
The advanced wiper and washer systems in the 2022 Lincoln Nautilus set new standards for safety and visibility in a wide range of driving situations. Modern technology is built into the car to make sure that the window wipers and washers work perfectly. The windshield wipers are made to work quickly and quietly, clearing the glass of rain, snow, and other debris. With speed options that can be changed, the wipers can adapt to the amount of rain, making driving easier. The washer system works with the wipers to provide an exact and thorough spray of windshield washer fluid, which further enhances visibility. This mix of high-tech wiper and washer features shows that Lincoln is dedicated to giving the 2022 Lincoln Nautilus driver a better driving experience by putting safety and comfort first.
WIPERS
WIPER PRECAUTIONS
Do not operate the wipers on a dry windshield. This could scratch the glass or damage the wiper blades. Use the windshield washers before wiping a dry windshield.
Fully defrost the windshield before you switch the windshield wipers on.
Switch the windshield wipers off before entering a car wash.
SWITCHING WINDSHIELD WIPERS ON AND OFF
- Single wipe.
- Intermittent wipe.
- Normal wipe.
- High-speed wipe.
Push the lever up or down to operate the windshield wipers.
AUTO WIPERS
WHAT ARE AUTO WIPERS
Auto wipers turn on and control the speed and frequency of the windshield wipers.
AUTO WIPERS SETTINGS
- Using the instrument cluster controls on the steering wheel, select Settings.
- Select Vehicle.
- Select Wipers.
- Switch Rain Sensing on or off.
Note: When you switch the feature off, the wipers do not operate based on the rain sensor. When you switch on the windshield wipers to the intermittent wipe position with the feature off, the wipers use the wipe speed set by the rotary control.
ADJUSTING THE SENSITIVITY OF THE RAIN SENSOR
- High sensitivity.
- Low sensitivity.
Use the rotary control to set the sensitivity of the rain sensor.
When you select high sensitivity, the wipers operate when the sensor detects a small amount of water on the windshield.
When you select low sensitivity, the wipers operate when the sensor detects a large amount of water on the windshield.
SWITCHING THE REAR WINDOW WIPER ON AND OFF
- Intermittent wipe.
- Continuous wipe.
- The rear window wiper is off.
REVERSE WIPE
WHAT IS REVERSE WIPE
Reverse wipe turns on the rear window wiper when you shift into reverse (R) and the windshield wipers are on.
REVERSE WIPE SETTINGS
- Using the instrument cluster controls on the steering wheel, select Settings.
- Select Vehicle.
- Select Wipers.
- Switch the Reverse Wiper on or off.
CHECKING THE WIPER BLADES
Run the tip of your fingers over the edge of the blade to check for roughness.
REPLACING THE FRONT WIPER BLADES
Make sure your vehicle is off before beginning this procedure.
- Lift the wiper arm and then press the wiper blade locking buttons together.
Note: Do not hold the wiper blade to lift the wiper arm.
Note: Make sure that the wiper arm does not spring back against the glass when the wiper blade is not attached. - Slightly rotate the wiper blade.
- Remove the wiper blade.
- To install, reverse the removal procedure.
Note: Make sure that the wiper blade locks into place.
REPLACING THE REAR WIPER BLADES
- Lift the wiper arm.
Note: Do not hold the wiper blade to lift the wiper arm. - Remove the wiper blade.
Note: Make sure that the wiper arm does not spring back against the glass when the wiper blade is not attached. - To install, reverse the removal procedure.
Note: Make sure that the wiper blade locks into place.
WASHERS
WASHER PRECAUTIONS
WARNING: If you operate your vehicle in temperatures below 41°F (5°C), use washer fluid with antifreeze protection. Failure to use washer fluid with antifreeze protection in cold weather could result in impaired windshield vision and increase the risk of injury or accident.
Do not operate the washers when the washer reservoir is empty. This could cause the washer pump to overheat. Keep the outside of the windshield clean. The rain sensor is very sensitive and the wipers may operate if dirt, mist, or insects hit the windshield.
USING THE WINDSHIELD WASHER
Pull the lever toward you to operate the windshield washer.
Note: A courtesy wipe occurs a short time after the wipers stop to clear any remaining washer fluid when switched on.
SWITCHING THE COURTESY WIPE ON AND OFF
- Using the instrument cluster controls on the steering wheel, select Settings.
- Select Vehicle.
- Select Wipers.
- Switch Courtesy Wipe on or off.
USING THE REAR WINDOW WASHER
Push the lever away from you to operate the rear window washer.
Note: A courtesy wipe occurs a short time after the wipers stop to clear any remaining washer fluid when switched on.
ADDING WASHER FLUID
WASHER FLUID SPECIFICATION
WIPERS AND WASHERS –TROUBLESHOOTING
WIPERS AND WASHERS – WARNING LAMPSIlluminates when the windshield washer fluid is low.
WIPERS AND WASHERS –FREQUENTLY ASKED QUESTIONS
Why are there streaks and smears on the windshield?
The wiper blades could be dirty, worn, or damaged. Check the wiper blades. If the wiper blades are dirty, clean them with washer fluid or water applied with a soft sponge or cloth. If the wiper blades are worn or damaged, install new ones.
FAQs
Use the wiper control stalk on the right side of the steering column. Push it up or down to select the desired wiper speed.
Yes, the 2022 Lincoln Nautilus has variable intermittent wipers, allowing you to adjust the speed based on your preference.
Pull the wiper control stalk toward you to activate the windshield washer fluid and clean the windshield.
Yes, the 2022 Lincoln Nautilus may have rain-sensing wipers with adjustable sensitivity.
It’s recommended to replace the wiper blades at least once a year or sooner if you notice reduced effectiveness.
Some vehicles are equipped with a low washer fluid warning light. Check your instrument cluster for any such indicator.
It’s advisable to use a windshield washer fluid that is compatible with your vehicle.
Locate the washer fluid reservoir under the hood and visually inspect the fluid level. Add more fluid if needed.
Yes, the rear wiper is often adjustable with controls located on the same stalk as the front wipers.
While the wipers are designed for normal rain conditions, it’s advisable to clear ice manually before using the wipers in icy conditions.
Clean the wiper blades regularly, and during winter, lift the wipers to prevent them from freezing on the windshield.
Yes, you can manually control the wipers using the wiper control stalk’s different speed settings.
Replacing wiper blades is a relatively simple task and can often be done by the vehicle owner.
Check the fuse, wiper motor, and wiper linkage for any issues. If problems persist, consult with a qualified mechanic for further assistance.
Pull the wiper control stalk toward you to activate the windshield washer. This will spray washer fluid onto the windshield while the wipers are in motion.
Useful Link:
View Full PDF: 2022 Lincoln Nautilus User Manual | Auto User Guide
2022 Lincoln Nautilus Steering Wheel Control System Guidelines