2023 Lincoln Nautilus Wipers and Washers Guidelines
The 2023 Lincoln Nautilus Wipers and Washers Guidelines use cutting-edge technology and high-tech features to make the car safer and more enjoyable to drive. Precision engineering went into making the wipers so that they provide the best vision in all kinds of weather, so drivers can drive safely in rain, snow, or fog. Intelligent sensors built into the system change the speed and frequency of the wipers automatically based on how heavy the rain is. This makes it easy to keep the windshield clear without using your hands. In addition, the washer system is placed in a way that makes sure it cleans the glass completely and effectively, allowing you to see clearly. Not only do the 2023 Lincoln Nautilus Wipers and Washers Guidelines put safety first, but they also show the brand’s dedication to the new style and easy-to-use technology, which takes the driving experience to a whole new level.
WIPERS
WIPER PRECAUTIONS
Do not operate the wipers on a dry windshield. This could scratch the glass or damage the wiper blades. Use the windshield washers before wiping a dry windshield.
Fully defrost the windshield before you switch the windshield wipers on.
Switch the windshield wipers off before entering a car wash.
SWITCHING WINDSHIELD WIPERS ON AND OFF
- Single wipe.
- Intermittent wipe.
- Normal wipe.
- High-speed wipe.
Push the lever up or down to operate the windshield wipers.
AUTO WIPERS (IF EQUIPPED)
WHAT ARE AUTO WIPERS
Auto wipers turn on and control the speed and frequency of the windshield wipers.
AUTO WIPERS SETTINGS
- Using the instrument cluster controls on the steering wheel, select Settings.
- Select Vehicle.
- Select Wipers.
- Switch Rain Sensing on or off.
Note: When you switch the feature off, the wipers do not operate based on the rain sensor. When you switch on the windshield wipers to the intermittent wipe position with the feature off, the wipers use the wipe speed set by the rotary control.
ADJUSTING THE SENSITIVITY OF THE RAIN SENSOR
- High sensitivity.
- Low sensitivity.
Use the rotary control to set the sensitivity of the rain sensor.
When you select high sensitivity, the wipers operate when the sensor detects a small amount of water on the windshield.
When you select low sensitivity, the wipers operate when the sensor detects a large amount of water on the windshield.
SWITCHING THE REAR WINDOW WIPER ON AND OFF
- Intermittent wipe.
- Continuous wipe.
- The rear window wiper is off.
REVERSE WIPE
WHAT IS REVERSE WIPE
Reverse wipe turns on the rear window wiper when you shift into reverse (R) and the windshield wipers are on.
REVERSE WIPE SETTINGS
- Using the instrument cluster controls on the steering wheel, select Settings.
- Select Vehicle.
- Select Wipers.
- Switch the Reverse Wiper on or off.
CHECKING THE WIPER BLADES
Run the tip of your fingers over the edge of the blade to check for roughness.
REPLACING THE FRONT WIPER BLADES
Make sure your vehicle is off before beginning this procedure.
- 1. Lift the wiper arm and then press the wiper blade locking buttons together.
Note: Do not hold the wiper blade to lift the wiper arm.
Note: Make sure that the wiper arm does not spring back against the glass when the wiper blade is not attached. - Slightly rotate the wiper blade.
- Remove the wiper blade.
- To install, reverse the removal procedure.
Note: Make sure that the wiper blade locks into place.
REPLACING THE REAR WIPER BLADES
- Lift the wiper arm.
Note: Do not hold the wiper blade to lift the
wiper arm. - Remove the wiper blade.
Note: Make sure that the wiper arm does not spring back against the glass when the wiper blade is not attached. - To install, reverse the removal procedure.
Note: Make sure that the wiper blade locks into place.
WASHERS WASHER PRECAUTIONS
WARNING: If you operate your vehicle in temperatures below 41°F (5°C), use washer fluid with antifreeze protection. Failure to use washer fluid with antifreeze protection in cold weather could result in impaired windshield vision and increase the risk of injury or accident.
Do not operate the washers when the washer reservoir is empty. This could cause the washer pump to overheat. Keep the outside of the windshield clean. The rain sensor is very sensitive and the wipers may operate if dirt, mist, or insects hit the windshield.
USING THE WINDSHIELD WASHERPull the lever toward you to operate the windshield washer.
Note: A courtesy wipe occurs a short time after the wipers stop to clear any remaining washer fluid when switched on.
SWITCHING THE COURTESY WIPE ON AND OFF
- Using the instrument cluster controls on the steering wheel, select Settings.
- Select Vehicle.
- Select Wipers.
- Switch Courtesy Wipe on or off.
USING THE REAR WINDOW WASHER
Push the lever away from you to operate the rear window washer.
Note: A courtesy wipe occurs a short time after the wipers stop to clear any remaining washer fluid when switched on.
ADDING WASHER FLUID
WASHER FLUID SPECIFICATION
WIPERS AND WASHERS –TROUBLESHOOTING
WIPERS AND WASHERS – WARNING LAMPSIlluminates when the windshield washer fluid is low.
WIPERS AND WASHERS –FREQUENTLY ASKED QUESTIONS
Why are there streaks and smears on the windshield?
The wiper blades could be dirty, worn, or damaged. Check the wiper blades. See Checking the Wiper Blades (page 117). If the wiper blades are dirty, clean them with washer fluid or water applied with a soft sponge or cloth. If the wiper blades are worn or damaged, install new ones.
FAQs
Wiper blade replacement is generally recommended every 6 to 12 months, depending on usage and environmental conditions.
Use a high-quality windshield washer fluid that is compatible with your vehicle’s specifications, especially during colder months to prevent freezing.
Yes, most wiper arms are designed to allow easy lifting for cleaning or replacement. Follow the manufacturer’s guidelines for proper procedure.
Yes, there are various aftermarket and OEM wiper blade options. Choose blades that are compatible with the Nautilus and follow the manufacturer’s recommendations.
Use the wiper control settings on the vehicle’s stalk or dashboard to adjust the wiper speed according to your preference.
Clean the wiper blades and windshield, and consider replacing the blades if the noise persists. Check for any loose or damaged components.
Yes, many people can replace wiper blades themselves.
It is not recommended to dilute windshield washer fluid with water, as it may affect performance, especially in freezing conditions.
Use a mild detergent and a soft cloth to clean the wiper blades. Avoid using abrasive materials that could damage the blades.
Some models may come equipped with rain-sensing wipers.
Many vehicles have a feature that allows you to temporarily disable the wipers.
Check for clogs in the washer nozzles and make sure the fluid reservoir is filled.
While aftermarket blades are an option, it’s recommended to use blades specifically designed for your vehicle model for optimal performance.
Headlight washer systems, if equipped, are typically activated by pulling the wiper control stalk toward you.
Some models may offer a heated windshield or a heated wiper park area to prevent ice and snow buildup.
Useful Link:
View Full PDF: 2023 Lincoln Nautilus Owner’s Manual | Auto User Guide
2023 Lincoln Nautilus Steering Wheel Control System Guidelines